no brake pedal after big brake conv. (archive)

I just finished installing used 240 Volvo calipers,new 320i discs...My brakes worked fine before, except for not very high stopping power. After bleeding the calipers w/ a one man bleeding kit, I still have no pedal. I can't find any noticable leaks. When changing the calipers most of the fluid leaked out. I tried to bleed the master cylinder through the 10mm bolt on top to no avail. should this fitting pass alot of fluid? It spit a tiny bit of fluid out. If anyone has any suggestions let me know. Thanks,
Duane
'71 02
'71 r60/5

Follow Ups:

I blew it! Duane 22:46 3/19/2000 (0)
Did you upgrade the master cylinders? Dwight Chew 21:32 3/19/2000 (1)
- I wouldn't recommend plugging ports on a Tii Master Cylinder, not sound engineering 22:44 3/19/2000 (0)
Re: no brake pedal after big brake conv. Peter 17:45 3/19/2000 (0)
Re: no brake pedal after big brake conv. Earl Myers 17:25 3/19/2000 (0)
Try gravity bleeding Gabe Pari 17:04 3/19/2000 (0)

[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.