oil leak on exhaust (archive)
[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]
Posted by rob h on May 28, 2000 at 22:55:59:
(posted from: user-38ld0fa.dialup.mindspring.com (209.86.129.234))
after putting in new exhaust studs, bolts and gasket onto my head and tightening down the bolts, it's looking like cyls. #2 & 3 are leaking through those top bolts and it's getting down onto the exhaust and smoking.i didn't want to tighten the studs too far into the head as they seemed to just keep going. so i put some locktite on them cranked them in w/ two nuts on them and let them sit in there for about 3-4 hours before i tightened the exhaust maniforld. (the studs i got are a continous thread, NOT the kind with an unthreaded portion near the center). any ideas/suggestions?
thanks,
rob
Follow Ups:
[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]