ok, still having that jerky feeling in my "02. So far, ive changed the Plugs, wires, Points, rotor, Bosch Blue coil, Distributor cap, Condenser, fuel lines, fuel filter. Today it was rockin on me still around 3000-3500 rpm, so i FLOORED it into the next gear. well, going up in rpm, at about 3000 rpm it jerked slightly, then at 4500 rmp(about a 1/3 second later) it felt good again. is this the "flat-spot" when the 32 goes to the 36? if so, could anyone send me some info on how to tune the carb so this wont happen, or is the carb screwed? i heard the Haynes Weber manual isnt too good for actuall tuning, so i thought id ask you all.