The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Thank you Neil! The cut-out was missing (archive)
[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]
Posted by Andy M on January 16, 2001 at 10:36:56:

In Reply to: Re: TEP 5 sp bracket question posted by Neil O'D on January 15, 2001 at 14:31:02:


On the metal tab from the original tranny mounting point to the new tranny mounting point on the Top end bracket, there should be a cutout (where the tab is ground away to allow clearance for the cable to go through) on the tunnel side of that tab.

If they neglected to grind it away, either drill a hole as you suggested, grab a die grinder or a dremel and clearance it yourself, or for that matter, IMO that portion of the bracket only serves as a locator for the final mounting points and could probably be removed.

Let us know what you end up doing.

Neil O'D
73 Inka

a drill and a die grinder did the trick.


Follow Ups:


[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2008 Jump Internet Inc. All rights reserved.