The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: tii help needed (archive)

[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]

Posted by shermanmartinez on June 27, 2001 at 19:03:39:

In Reply to: tii help needed posted by John S on June 26, 2001 at 18:39:51:

The adjusting arm for the alternator uses a pair of bushings that fit together on each side of the arm to reduce vibration. The stud on the back side of the front cover is not used on the tii. It was probably placed there for use on another model such as the 2000tii.
[email protected]

About five years ago I took my 73 tii engine out and disassembeled it. I have finally done the work on it that was needed and put it together. There are two things that I can't remember and haven't found a picture that helps. First, the amr for adjusting the alternator has a hole for attaching it to the bottom of the engine. The hole is bigger than the protrusion that it connects to and the stud is about an inch long. What fills the arm hole and why is the stud so long? Second, above the alternator is a stud that sticks out the back of the injector pump belt housing. What is its purpose? I am getting exited about finally getting that car back on the road! Any help would be most appreciated.

Follow Ups:

[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk. Logo © 1997 - 2018 Jump Internet Inc. All rights reserved.