The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: How did you do the lower radiator hose? (archive)

[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]

Posted by Stacey on June 28, 2001 at 09:52:34:

In Reply to: How did you do the lower radiator hose? posted by ///M Chris on June 28, 2001 at 00:31:58:

I matched up a curved section of an extra top radiator hose I had to the stock rad bottom fitting, and put it on the 320 rad. I used a 1.25" inner sleeve to connect that to the hose coming down from the thermostat (about half way between the rad fitting and the thermo), which needed to be trimmed back a couple inches (the sleeve is available at any hardware store). When I replace the hoses when the engine is out, I'll probably go with a 320I lower hose to see if it fits better. I'm happy with the fitment now. No rubbing, no kinks, no leaks, no errors. But, I'm always looking for improvements.

I'll post some pictures on the Tulsa '02 website when it's ready. What I did was just a twist of what is posted on the Bay Area site.

Stacey
Tulsa
'76 2002 O=00=O
'73 R75/5 LWB
'01 Triumph Sprint ST


Follow Ups:



[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2017 Jump Internet Inc. All rights reserved.