In Reply to: 'Just did it on Max' new tii! posted by Paul (at Maximill...) more... on June 29, 2001 at 09:23:40:
Put the puller on the arm and put some good force on it, enough to pull the thing off in normal circumstances. Get out your simple propane torch and start heating the arm where it goes around the splined shaft (donít heat the shaft directly). After a minute or two, whack the heated area with a hammer. The arm will very likely move. If not try again as many times as common sense allows.
I have removed a half a dozen of these things this way and have never ruined a shaft seal. Usually comes free on the first whack.