The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: yes it can be done! (archive)
[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]
Posted by Greg Taylor on July 09, 2001 at 03:27:10:

In Reply to: yes it can be done! posted by ///M Chris on July 08, 2001 at 17:55:48:

I'm bored to 92mm now and have the s14 rotating assembly less the pistons.So how would one go about finding the pin/compression height of the s14 piston?Seems the pin would need to move up since the stroke and rod length are longer.Would you just ask for s14 pistons or will they need to be special made?Or if any one has done this do you know all the piston specs.Yes for a 2 valve head.And what do you mean about grafting 2 head gaskets together?
If you are using a 2 valve head, I would recommend using JE pistons oversized to 93.5. The 4 valve head uses different pistons. So you can use the crank and rods.

Another interesting problem is the head gasket. You have to buy a 2002 gasket and a M3 gasket and graft them together.

The Deck height of the block is the same..




Follow Ups:


[ Follow Ups ] [ 2002 Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2009 Jump Internet Inc. All rights reserved.