|

Hi all --
Spent this afternoon trying to bring my door panels back to life. I had bought a roll of 3M 850 tape (silver) a few months ago but put off the task until today. Here are some photos...
The pre-74 panels have this huge strip underneath the vent window -- as you can see, my fake chrome has peeled off entirely.
I covered the strip with a piece of the 3M tape.
Trim with an X-Acto that is sharp enough to cut the tape but dull enough to not slice up your vinyl.
Here's the finished product. I might try this one again -- the surface must be absolutely clean for the tape to stick to the edges of the raised area.
Keep them on the road,
Scott
72 tii