bimmer.org forums: BMW 2002 Forum Archive, 2001 week 19

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW 2002 Forum Archive, 2001 week 19

Search Archives

How much fluid is in the entire braking system?... - Jason H. 23:51 5/13/2001 (2)
- Buy at least two quarts....eom - Dwight Chew 00:31 5/14/2001 (1)
  - Thanks, Dwight - Jason H. 10:42 5/14/2001 (0)
What is the size of ... - Jason H. 23:47 5/13/2001 (4)
- I've found 22 AND 19 in various - 02s! Paul (at Maximilll...) eom. 17:03 5/14/2001 (0)
- 7/8" will also work.....eom - Dwight Chew 00:30 5/14/2001 (0)
- 22mm - Jason (nt) - Keith 1974tii 23:55 5/13/2001 (1)
  - Thanks Keith! - Jason H. 23:59 5/13/2001 (0)
Breather for valve cover - Da Hose 23:40 5/13/2001 (1)
- Re: Breather for valve cover - John 12:59 5/14/2001 (0)
Might move my Photopoint albums to here (url) (pic) - jim s 23:01 5/13/2001 (4)
- HOW TO: make your photos work on RoadFly... (pic) - Keith 1974tii 23:52 5/13/2001 (3)
  - Mac users: HOW TO: - dan 01:43 5/14/2001 (0)
  - like this? (pic) - Gomer 00:27 5/14/2001 (1)
    - what's up with the red "x" then? is it just me? (nt) - markeest 01:04 5/14/2001 (0)
Electric sunroof on my parts car, need help - Dwight H. 22:52 5/13/2001 (1)
- My 74tii also has power sunroof - Coltrane 17:57 5/14/2001 (0)
FS: 76 Tub or Body panels....MORE - Ryan 22:48 5/13/2001 (1)
- PLS E-Mail me - Ryan 23:03 5/13/2001 (0)
like, whoa (who's is this?) (pic) (nt) - Rob S. 22:46 5/13/2001 (12)
- That thing had three fuel pumps...looks like I'm - short a few (eom) Nick Pon 15:06 5/14/2001 (0)
- Ok, mebbe I'm dumb...but what IS that device? (nt) - Tim in MD 12:40 5/14/2001 (3)
  - Re:Accusump,three fuel pumps,surge tank - boyah 20:33 5/14/2001 (0)
  - expensive. ;-P - Paul (at Maximilll...) eom 14:16 5/14/2001 (0)
  - Battery, fuel pump, fuel cell, overflow bottle..nt - Dwight Chew 13:05 5/14/2001 (0)
- Oh, I want it!! - Paul (at Maximilll...) eom 12:13 5/14/2001 (0)
- Got any more pictures on that one? (nt) - The_Corbinator 11:30 5/14/2001 (0)
- Re: like, whoa (who's is this?) - Mike87 09:41 5/14/2001 (1)
  - thanks mike, sherman (nt) - Rob S. 14:38 5/14/2001 (0)
- '02 racer shown at Bay Area 02 Swap & Show..eom - Dwight Chew 00:32 5/14/2001 (0)
- No trunk space for my golf clubs!! - 1putt 23:31 5/13/2001 (1)
  - dont you hate 02s that are only good for (nt) - HAULING ASS!!!!!!!!!!!!!?????????? 14:18 5/14/2001 (0)
wanted 292 cam - Mike 22:38 5/13/2001 (0)
How do U tell % slip in a LSD? - Gil 22:09 5/13/2001 (4)
- Re: How do U tell % slip in a LSD? - Terje Salhus 22:29 5/13/2001 (2)
  - Mine from an 81 320is says - Gil 01:42 5/14/2001 (1)
    - Re: Mine from an 81 320is says - shermanmartinez 10:19 5/14/2001 (0)
- bimmers.com has something about it - Rob S. 22:25 5/13/2001 (0)
FOR SALE - 1974 2002 (pic) - DJE 22:01 5/13/2001 (1)
- check your e-mail, I'm interested in the ... - Timmer 07:32 5/14/2001 (0)
gotta replace springs, which do i want? - Jimmy03 21:42 5/13/2001 (2)
- Re: gotta replace springs, which do i want? - Dwight Chew 00:46 5/14/2001 (1)
  - Thanks dwight, i appreciate the insight - Jimmy03 22:34 5/14/2001 (0)
Track Event at Holtville Raceway - May 20 (url) - Chris R. 21:27 5/13/2001 (0)
I bought basketweave rims off a 91 318is for $200! - Zach 20:24 5/13/2001 (1)
- Beats a guilty conscience from "midnight auto - wrecking X 04:05 5/14/2001 (0)
320i rims on 1600 - Gene S 20:20 5/13/2001 (0)
My tii seems to like it cold... - grange 20:19 5/13/2001 (2)
- and, the Dash or VDO console gauge? Tag on quest'n - david 20:41 5/13/2001 (1)
  - Re: and, the Dash or VDO console gauge? Tag on que - Dwight Chew 13:10 5/14/2001 (0)
Dwight - I didn't fill the oil filter... (nt) (nt) - Elliot 19:29 5/13/2001 (1)
- Huh? - Dwight H. 22:55 5/13/2001 (0)
width of 'washer' for big brake, really 1/2 inch? - canada matt 19:23 5/13/2001 (4)
- Re: width of 'washer' for big brake, really 1/2 in - Dwight Chew 13:15 5/14/2001 (0)
- Re: width of 'washer' for big brake, really 1/2 in - John N. 00:28 5/14/2001 (0)
- umm..... - Seth Ragona 20:04 5/13/2001 (1)
  - hehe, now THAT makes sense :) - canada matt 20:05 5/13/2001 (0)
71 Front bumper for sale. - Kyle 19:12 5/13/2001 (0)
Fifteen inch wheels-6-6&1/2 or 7 inch?..more - Nevada72 18:58 5/13/2001 (8)
- Re: Fifteen inch wheels-6-6&1/2 or 7 inch?..mo - 02 Majik 21:48 5/13/2001 (4)
  - Purchase Revolutions here (url) (nt) - Mr. Fabulous 03:49 5/14/2001 (2)
    - one problem- the size I need....more - Nevada72 09:42 5/14/2001 (1)
      - yoko still makes the 196/60-14 AVS intermediates (nt) - frederick 15:07 5/14/2001 (0)
  - Re: Fifteen inch wheels-6-6&1/2 or 7 inch?..mo - Marty 22:20 5/13/2001 (0)
- Re: Fifteen inch wheels-6-6&1/2 or 7 inch?..mo - Jonathan T. 21:06 5/13/2001 (2)
  - What's the prob. with 195-50-15 on 15x7 wheels (m) - Monte 01:17 5/14/2001 (1)
    - Re: What's the prob. with 195-50-15 on 15x7 wheels - Everett 15:56 5/14/2001 (0)
does anyone know where to get ureth. motor mounts? - Elliot 18:56 5/13/2001 (3)
- Re: does anyone know where to get ureth. motor mou - ken 08:13 5/14/2001 (0)
- Poly would cause more vibration.... - X 04:14 5/14/2001 (0)
- Some places have HD mounts... - Seth Ragona 19:19 5/13/2001 (0)
WANTED:Rocker Panels - Slavs 18:39 5/13/2001 (2)
- $58.00 ea. (all day long!!) - Paul (at Maximilll...) eom 14:17 5/14/2001 (0)
- New ones are available and cheap...more - Jonathan T. 20:26 5/13/2001 (0)
What's so great about 320i aluminum rads? - Gil 18:31 5/13/2001 (2)
- work great and cheap.. - trent tilton - sev3nty 0ne sah4ra 12:05 5/14/2001 (0)
- aluminum dissapates heat better. Cooler eng. - Dougiefresh 18:40 5/13/2001 (0)
Front end suspension replacement question - Elliot 17:58 5/13/2001 (4)
- Re: Front end suspension replacement question - Da Hose 23:21 5/13/2001 (0)
- if i can do it.. - canada matt 18:35 5/13/2001 (2)
  - if smooth means not finding wheel studs.. - canada matt 19:10 5/13/2001 (0)
  - hey thanks matt, hope yr 02 is coming along smooth - Elliot 18:54 5/13/2001 (0)
FS: BMW 2002 turbo on ebay (url) (nt) - Frank 16:56 5/13/2001 (10)
- Re: FS: BMW 2002 turbo on ebay - basiegal 14:16 5/15/2001 (1)
  - Car is complete! - Frank 16:09 5/15/2001 (0)
- Re: FS: BMW 2002 turbo on ebay - Frank 12:59 5/15/2001 (0)
- We dont all live in rain free California you know - Rob J 75 Tii 15:09 5/14/2001 (0)
- How does such a rare car fall into that condition? (nt) - Josh 09:49 5/14/2001 (1)
  - Re: How does such a rare car fall into that condit - WH 10:56 5/14/2001 (0)
- It would go nice with my full set of Turbo stripes - f1reverb 07:38 5/14/2001 (2)
  - It's a rust-bucket POS. Look at the photos on his - f1reverb 07:58 5/14/2001 (1)
    - he says it needs restoration (nt) - go easy 17:11 5/14/2001 (0)
- I dont know, (Non Runner) - ROB J 75 Tii 17:54 5/13/2001 (0)
Bay Area 02 Swap & Show Reflections (pic) - Ron 16:38 5/13/2001 (0)
Eurofest Nashville Car Show (pic) - bert 16:30 5/13/2001 (0)
FYI: Friend just sold his cherry 72 tii for $12K - doug 16:08 5/13/2001 (0)
PEDAL BOX` - ASON 15:51 5/13/2001 (0)
Rode in a new M5 yesterday!!! - Zach 15:12 5/13/2001 (0)
Powder coat... or rattle can? - X 15:05 5/13/2001 (2)
- Gloss black Wurth rustguard paint - Nelson 13:36 5/14/2001 (0)
- i did both - canada matt 17:45 5/13/2001 (0)
How to disassemble rear brakes to change ebrake - cables??? Rob S. 14:23 5/13/2001 (4)
- Going by memory, you.... - Gil 14:39 5/13/2001 (0)
- Re: How to disassemble rear brakes to change ebrak - Dwight H. 14:38 5/13/2001 (2)
  - Doesn't the brake handle need to be removed to get - new cables in? X 14:50 5/13/2001 (1)
    - Re: Doesn't the brake handle need to be removed to - Dwight H. 14:59 5/13/2001 (0)
Why is it that the Slow cars are in the way... (nt) - At the most fun part of the road? 13:36 5/13/2001 (3)
- No prob , I use them as a "rolling chicane" . (nt) - Teaguer 22:13 5/13/2001 (0)
- Because the synchro in my second gear is going out - chris1602 14:22 5/13/2001 (0)
- That's my biggest pet peeve. Hate it a lot! EOM - Bryan 13:51 5/13/2001 (0)
What part would you most desire new - that's NLA?? - Keith 74tii 13:22 5/13/2001 (13)
- Kugelfischer pumps are available new $$$$ - Tony 11:11 5/14/2001 (0)
- 74 tii a/c crank pulley.eom - RHL 07:58 5/14/2001 (0)
- Early tii clock and early dash with chrome (nt) - Jumbo2002ti 21:08 5/13/2001 (0)
- Door Skins - ROB J 75 Tii 14:56 5/13/2001 (0)
- Clutch pedal bolt w/ bushings... - X 14:53 5/13/2001 (0)
- door panels, switches & 2-piece dash. (nt) - Gil 14:44 5/13/2001 (4)
  - Two-piece dash still available, but it's $1,485.00 - ScottSt 15:46 5/13/2001 (3)
    - That's pretty funny! (nt) - Tom D 00:19 5/15/2001 (0)
    - Bottoms are gone, still a couple tops left (eom) (nt) - Matt S 16:59 5/14/2001 (0)
    - I think I'm having chest pains. Youch! (nt) - Gil 18:23 5/13/2001 (0)
- my is the tii pump gear, clock, doors panels - Rey 74Tii 13:47 5/13/2001 (0)
- Kugelfisher pumps - Shen 13:45 5/13/2001 (0)
- Wish list... - Peter 13:24 5/13/2001 (0)
Here's an interesting collector Alfa on e-bay (url) - Gil 12:19 5/13/2001 (0)
Any1 got May/01 copy of PC World? e-bay article in - it. Gil 11:58 5/13/2001 (3)
- here ya go, this will keep ya off the streets a bt (url) - Dan A. Williams 16:34 5/13/2001 (1)
  - Not quite what I was lead to believe. But interes (nt) - ting anyway. Thx. Gil 18:28 5/13/2001 (0)
- i read it on line, but cant find the link,try srh - Dan A. Williams 16:31 5/13/2001 (0)
How do you get the side motor mount off? - Zach 11:31 5/13/2001 (1)
- Left is easy, right is trickier..... - Gil 11:47 5/13/2001 (0)
looking for particular inka pic - canada matt 10:05 5/13/2001 (11)
- Re: looking for particular inka pic (pic) - trent tilton - sev3nty 0ne sah4ra 11:08 5/13/2001 (10)
  - Are those Revolution wheels on the front? EOM - Nevada72 12:32 5/13/2001 (8)
    - yep (more) (url) - frederick 17:07 5/13/2001 (7)
      - Only 12 parties reqrd - u need a spare tire? (nt) - John McA 18:25 5/14/2001 (2)
        
        12x4=48 it says we need 60 eom - Nevada72 19:58 5/14/2001 (1)
        
        GET 5 PER CAR X 12 = 60 :) and have a spare! (nt) - John McA 16:32 5/15/2001 (0)
      - anyone interested? (nt) - frederick 17:10 5/13/2001 (3)
        
        I am but.... - Nevada72 18:13 5/13/2001 (2)
        
        aw shucks...more - Nevada72 18:26 5/13/2001 (1)
        
        Re: aw shucks...more (pic) - frederick 22:36 5/13/2001 (0)
  - Is Canada Matt gonna have a twin?? (nt) - Gil 11:11 5/13/2001 (0)
How do you line the clutch up? (nt) - Zach 10:01 5/13/2001 (3)
- Another way is to sit with your eyeball directly - in line with it... Tkent02 03:47 5/14/2001 (0)
- Re: How do you line the clutch up? - Dwight H. 10:57 5/13/2001 (1)
  - an output shaft from an old tranny is the best... - Nick Pon 15:09 5/14/2001 (0)
How do you get the throw out bearing out? (nt) - Zach 09:59 5/13/2001 (3)
- If you mean the T/O bearing, - Gil 11:10 5/13/2001 (2)
  - getting pilot bearing out - geoff 14:31 5/13/2001 (1)
    - How do you know? - Dwight H. 14:41 5/13/2001 (0)
euro signal lens Q - canada matt 09:14 5/13/2001 (0)
my volvo caliper update - canada matt 09:07 5/13/2001 (3)
- where did you get them?? - Elliot 17:22 5/13/2001 (2)
  - well - canada matt 17:50 5/13/2001 (1)
    - Thanks, I appreciate it, but funds are low (nt) - Elliot 03:40 5/14/2001 (0)
pics of 02 swap meet, back to Canada (url) (pic) - jim s 07:25 5/13/2001 (13)
- Sweet...Bay area boys have big bucks!! - Dave, 09:05 5/14/2001 (0)
- nice! Anyone know more about that slide throttle? - (more) frederick 16:39 5/13/2001 (6)
  - Re: nice! Anyone know more about that slide throt - Hoa 18:42 5/13/2001 (5)
    - Re: nice! Anyone know more about that slide throt - frederick 22:10 5/13/2001 (4)
      - Re: nice! Anyone know more about that slide throt (url) - Hoa 02:51 5/14/2001 (3)
        
        thanks man! (nt) - frederick 15:09 5/14/2001 (2)
        
        You're welcome! (url) - Hoa 01:47 5/15/2001 (1)
        
        : ) (nt) - frederick 18:50 5/15/2001 (0)
- sweet pics Jim, do you have more info on the 2602. - Dan A. Williams 16:12 5/13/2001 (0)
- Cleaning up the drool. Wish I would have gone! - Bryan 14:10 5/13/2001 (0)
- Too nice! Didya go all the way there to see them? - Gil 11:04 5/13/2001 (1)
  - Was able to time a business trip with the Meet. (nt) - jim s 11:08 5/13/2001 (0)
- Great pictures Jim - Lee 09:11 5/13/2001 (0)
Hey Northwest beemer heads, give this a read, 02? - Cavan 07:19 5/13/2001 (3)
- got a white late 71 that might work for you,e me - Dan A. Williams 16:18 5/13/2001 (0)
- Cavan!! Welcome back... - Cameron Smith 12:19 5/13/2001 (1)
  - Re: Cavan!! Welcome back... - Marty 17:21 5/13/2001 (0)
BMWCCBC members check this out... - markeest 02:26 5/13/2001 (0)
Anyone in Seattle area with an engine hoist? - Bryan 00:25 5/13/2001 (1)
- Re: Anyone in Seattle area with an engine hoist? - Cameron Smith 14:40 5/13/2001 (0)
Trent; thx for the hammerlite tip - canada matt 00:17 5/13/2001 (0)
2002 wheels cylinders on 320 drums? - canada matt 00:08 5/13/2001 (4)
- Wait until you get the right ones....eom - Dwight Chew 01:25 5/13/2001 (3)
  - actually, how can you 'test' cylinders? - canada matt 09:24 5/13/2001 (1)
    - Re: actually, how can you 'test' cylinders? - Dwight Chew 14:15 5/13/2001 (0)
  - how come? (nt) - canada matt 09:20 5/13/2001 (0)
Queens meet update - Gil 23:59 5/12/2001 (2)
- Lest you get confused, this is some other "Gil" - '02' Gil 01:45 5/13/2001 (1)
  - some other "Gil" - david 06:34 5/13/2001 (0)
help: wheel stud question - canada matt 23:35 5/12/2001 (4)
- Some tings to keep in mind w/ wheel studs - K.C.K. 08:43 5/13/2001 (1)
  - purrrfect - canada matt 09:00 5/13/2001 (0)
- Try E30 series lug bolts.....more - Dwight Chew 23:51 5/12/2001 (1)
  - more q's. - canada matt 00:05 5/13/2001 (0)
bored?...name that colour... (pic) - markeest 23:02 5/12/2001 (6)
- Korall? - pmm 18:34 5/13/2001 (0)
- ahhhh sh*t...try this one (pic) - markeest 00:39 5/13/2001 (1)
  - here try this (pic) (nt) - Rob S. 14:35 5/13/2001 (0)
- *now* i am bored ;) - Rob S. 00:02 5/13/2001 (0)
- Re: bored?...name that colour... (pic) - Hoa 23:57 5/12/2001 (0)
- not red, but a red X : ) (nt) - andrey 23:31 5/12/2001 (0)
a new addition to the driveway - Ryan Z. 22:47 5/12/2001 (0)
E21 Recaros F/S (url) (nt) - alan 22:46 5/12/2001 (1)
- Cosider sold. Check your e-mail (nt) - '02' Gil 01:53 5/13/2001 (0)
ok, I took 50 photos @ the Bay Are 02 swap&show... (url) - andrey 22:34 5/12/2001 (4)
- Re: ok, I took 50 photos @ the Bay Are 02 swap& - Ric 11:35 5/14/2001 (0)
- Re: ok, I took 50 photos @ the Bay Are 02 swap& - Bret 13:34 5/13/2001 (0)
- excellent pics Andrey - david 06:42 5/13/2001 (0)
- Great pics, Andrey fery nice cars wow . nt - Rey 74Tii 01:59 5/13/2001 (0)
Will a rear view mirror from a 320 fit a 2002? - Dave 22:16 5/12/2001 (5)
- Re: Will a rear view mirror from a 320 fit a 2002? - Ric 11:38 5/14/2001 (0)
- try a early 5 series...not sure what year,nt - Dan A. Williams 03:55 5/13/2001 (0)
- Re: Will a rear view mirror from a 320 fit a 2002? - RHO 02:42 5/13/2001 (0)
- It may not ... (more) - David 00:04 5/13/2001 (0)
- yup - canada matt 23:03 5/12/2001 (0)
NE Riverside/San Berdo. junk yards w/ 02s (nt) (nt) - Raul 21:41 5/12/2001 (0)
"Dixi" air horn update (short) - DOG 21:17 5/12/2001 (4)
- get earplugs and lock yourself in a closet (nt) - until you can get it right! 23:24 5/12/2001 (1)
  - No closet space - full of car stuff! nt - DOG 04:23 5/13/2001 (0)
- feed it to their dog...(more) - markeest 21:52 5/12/2001 (1)
  - Haven't put it on the car more... - DOG 22:59 5/12/2001 (0)
Is 38 offset wheels too much? (nt) - Cameron A. 20:48 5/12/2001 (2)
- probably, but.... - Allen 08:59 5/13/2001 (0)
- i'll let you know next week :) - canada matt 00:19 5/13/2001 (0)
Rear Shocks & Big Brakes - Shockington 20:30 5/12/2001 (3)
- Re: Rear Shocks & Big Brakes - Shockington 08:05 5/13/2001 (0)
- Shocks - Gil 01:56 5/13/2001 (0)
- Huh? Stock shocks work for me (more) - John N. 23:54 5/12/2001 (0)
pinking? - kevin 75Tii 20:16 5/12/2001 (1)
- Re: pinking? - Dougiefresh 20:54 5/12/2001 (0)
I made it to the meet in Palo Alto!...more - Dougiefresh 19:59 5/12/2001 (9)
- Re: I made it to the meet in Palo Alto!...more - blu74tii 13:59 5/13/2001 (4)
  - Sounds like the same problem I had. (url) (pic) - Hoa 16:18 5/13/2001 (3)
    - Hey, that's what my head gasket looked like!!!! (nt) - blu74tii 18:17 5/13/2001 (1)
      - Hmmm...Interesting. - Hoa 18:53 5/13/2001 (0)
    - Sorry, here's the closeup. (pic) (nt) - Hoa 16:20 5/13/2001 (0)
- Re: I made it to the meet in Palo Alto!...more - Hoa 21:35 5/12/2001 (3)
  - yeah, we took the parking lot over.. I have photos (url) - andrey 23:33 5/12/2001 (2)
    - Re: yeah, we took the parking lot over.. I have ph - Hoa 00:15 5/13/2001 (1)
      - Re: yeah, we took the parking lot over.. I have ph - andrey 00:24 5/13/2001 (0)
Lubes - ROB J 75 Tii 19:31 5/12/2001 (0)
Silver 02 in Kirkland, black air dam & turbo flare - Bryan 18:21 5/12/2001 (0)
LIKE BUTTER! put redline MTL in the tranny, WOW! - Bryan 18:18 5/12/2001 (1)
- Congratulations! Worked wonders on our 73 Polaris (nt) - Cameron Smith 18:22 5/12/2001 (0)
please help the stupid (how to remove rear brakes? - Rob S. 18:08 5/12/2001 (6)
- how about the brake shoes?? - I need to swap E-brake cables 00:30 5/13/2001 (0)
- Hiya Rob. Ya need a 4-prong puller to get hub off - Gil 21:04 5/12/2001 (1)
  - I will have to wait till i mount new tii trailing - Rob S. 23:22 5/12/2001 (0)
- Re: please help the stupid (how to remove rear bra - Dwight Chew 19:24 5/12/2001 (2)
  - yea I Know (Never could get those 320 Brakes off)! - ROB J 75 Tii 19:33 5/12/2001 (1)
    - try it after taking the trailing arms off car! - DOG 20:53 5/12/2001 (0)
locating spring perch drain hole. help if you can - tim 16:20 5/12/2001 (2)
- Re: locating spring perch drain holes - Gil 16:46 5/12/2001 (1)
  - found em' thanks gil!! - tim 17:04 5/12/2001 (0)
blown engine?? what to check first - :( 16:08 5/12/2001 (4)
- pull the engine - Dougiefresh 19:44 5/12/2001 (0)
- Re: blown engine?? - Da Hose 19:24 5/12/2001 (0)
- Re: blown engine?? what to check first - Cameron Smith 18:28 5/12/2001 (0)
- Until you know for sure, I'd suspect the worst. - Gil 16:56 5/12/2001 (0)
Best oil for this dry Vegas heat? T.I.A. (nt) - The_Corbinator 15:40 5/12/2001 (1)
- Kendall Gt 20/50 or Mobil 1if engine isn't 2 old. - o2fly 15:51 5/12/2001 (0)
Best ignition system setup upgrade? - DangerBoB 14:22 5/12/2001 (4)
- Re: Best ignition system setup upgrade? - Jack Fahuna 13:19 5/13/2001 (0)
- no experience yet but distributor-less, (more) - John McA 19:37 5/12/2001 (0)
- Petronix, MSD6A, Red Coil, OEM Wires, NGK plugs (nt) - Cameron Smith 18:30 5/12/2001 (0)
- Re: Best ignition system setup upgrade? - Seth Ragona 14:45 5/12/2001 (0)
Who was looking for BWA wheels? email me, please (nt) - o2fly 14:15 5/12/2001 (0)
MC info needed - Mauricio 14:05 5/12/2001 (3)
- Re: MC info needed - John L '75 '02 (Philly PA) 15:33 5/12/2001 (2)
  - is it a direct fit - Mauricio 19:54 5/12/2001 (1)
    - it was on my ' 75... (nt) - John L '75 '02 (Philly PA) 22:52 5/12/2001 (0)
Silver tii in Vancouver??? - Jumbo2002ti 14:04 5/12/2001 (1)
- more unknown vancouver cars... - markeest 19:59 5/12/2001 (0)
shock tower frame question-need some advice here - tim 12:52 5/12/2001 (1)
- Shock tower drains - Gil 14:14 5/12/2001 (0)
5 series calipers - Terje Salhus 11:48 5/12/2001 (1)
- Re: 5 series calipers - WH 13:57 5/12/2001 (0)
Info: Fuel/Air Ratio Monitor for - Dwight H. 11:18 5/12/2001 (3)
- I like it .. what is best, one wire or three wire? (nt) - It's heated? do I need that? Tkent02 12:57 5/12/2001 (2)
  - Re: I like it .. what is best, one wire or three w - Dwight H. 14:34 5/13/2001 (1)
    - When you get it installed, let us know - what you think of it. Tkent02 04:13 5/14/2001 (0)
Jaymic strut brace info - canada matt 08:57 5/12/2001 (1)
- Ill have that motor please!!(even if it ........ - Rob J 75 Tii 17:41 5/12/2001 (0)
FS: $200 2002 on ebay (url) - Don Foote 08:54 5/12/2001 (0)
Link to DCOE setup tips (url) - geoff 08:02 5/12/2001 (2)
- Great link. Thanks! - Hoa 18:43 5/13/2001 (0)
- thx geoff, that will come in helpfull when i get m (nt) - canada matt 09:28 5/13/2001 (0)
PARTS FOR SALE---- LONG LIST WITH PRICES (url) - Mario L. 07:03 5/12/2001 (2)
- Location??? - JohnW 10:10 5/12/2001 (1)
  - last line: "ALL PARTS PLUS FREIGHT LOCATED IN NH" (nt) - Dave 10:41 5/12/2001 (0)
Info: Oil breather for your valve covers - Dwight H. 02:07 5/12/2001 (3)
- it was for a old VW bug set up.... - Dan A. Williams 03:58 5/13/2001 (0)
- Some Alfas had something similar and - Gil 11:48 5/12/2001 (1)
  - I saw this setup on an 02 that belongs to - Dwight H. 23:25 5/12/2001 (0)
Another view of that 800-hp drag '02. (url) - Hoa 02:04 5/12/2001 (1)
- I thought tii's had decent power until... - Nevada72 20:40 5/12/2001 (0)
cold start high idle - max 01:54 5/12/2001 (1)
- Re: cold start high idle - ray koke 09:35 5/12/2001 (0)
Part # for clutch hose extension for 5-speed conv? - TIA, Gil 01:34 5/12/2001 (5)
- Re: Part # for clutch hose extension for 5-speed c - Terje Salhus 11:32 5/12/2001 (0)
- This what you're lookin for? - Dave in Dallas 10:46 5/12/2001 (1)
  - Thx, that looks like it. (nt) - Gil 11:52 5/12/2001 (0)
- Re: Part # for clutch hose extension for 5-speed c - Dwight H. 01:49 5/12/2001 (1)
  - $30 for hose and extension. - Dwight H. 11:14 5/12/2001 (0)
WTB alternator - dw 01:27 5/12/2001 (1)
- Re: WTB alternator - Dwight H. 11:14 5/12/2001 (0)
Would a standard trim '72tii beat a '72 911 in a (nt) - handling duel?? 00:44 5/12/2001 (7)
- Re: Would a standard trim '72tii beat a '72 911 in - syed 16:58 5/12/2001 (0)
- done it - john 70 1602 11:02 5/12/2001 (0)
- No (nt) - Peter 01:11 5/12/2001 (4)
  - apples & oranges? (nt) - anti-man 01:51 5/12/2001 (3)
    - could superman beat up batman? - the hulk 22:52 5/12/2001 (2)
      - what about superman and batman vs. da bears - and ditka with one arm behind his back? 00:19 5/13/2001 (1)
        
        no way. scientifically impossible. - the hulk 01:15 5/13/2001 (0)
Struts - Andy74tii 00:00 5/12/2001 (1)
- Easy to remove the hubs/rotors.....more - Dwight Chew 01:14 5/12/2001 (0)
Track Event at Holtville Raceway - May 20 (url) - Chris R. 00:00 5/12/2001 (0)
Has anyone ever anything from Jaymic, I want - Rey 74Tii 23:35 5/11/2001 (6)
- their strut braces... (url) - canada matt 08:41 5/12/2001 (1)
  - oops, pics - canada matt 08:44 5/12/2001 (0)
- Re: Jaymic-I have a copy of their catalog. - Da Hose 01:31 5/12/2001 (0)
- Did you actually receive their catalog ? - Mr. Fabulous 01:09 5/12/2001 (1)
  - Mr. Fab the email me back with the prices, but - Rey 74Tii 01:40 5/12/2001 (0)
- opps, Bought. - Rey 74Tii 23:36 5/11/2001 (0)
New BMW 1:18 2002tii model (not Anson either!). - Mike Kotwick 23:20 5/11/2001 (0)
taillight fuse blowing - steve warren 23:16 5/11/2001 (2)
- Fuse #12 on '74 - Greg B. 15:57 5/14/2001 (0)
- Re: taillight fuse blowing - Dwight Chew 01:17 5/12/2001 (0)
Valve adjustment instructions please - Kevin 23:15 5/11/2001 (1)
- Re: Valve adjustment instructions please (url) - Dwight Chew 01:32 5/12/2001 (0)
FS 2002 engine and 4 spd(more) - Mike S 23:12 5/11/2001 (1)
- Re: FS 2002 engine and 4 spd(more) - Mike S 23:15 5/11/2001 (0)
Darn can't make it tomorrow to '02 gathering (nt) - Alex 23:08 5/11/2001 (0)
size of bleed screws? - canada matt 22:40 5/11/2001 (1)
- Stock screws are 7mm...if memory serves :) (nt) - Jason H. 22:57 5/11/2001 (0)
How do find out what A/C system I have? - Kevin 22:30 5/11/2001 (1)
- Re: How do find out what A/C system I have? - Dwight H. 01:59 5/12/2001 (0)
anyone used Wilwood m/c? - canada matt 22:25 5/11/2001 (0)
If you are trying to sell something READ THIS!!! - Karl S. 22:21 5/11/2001 (3)
- You dont like guessing? - anti-man 00:37 5/12/2001 (0)
- Amen! (nt) - Bob 23:05 5/11/2001 (0)
- Thank you, Karl.... (nt) - Kevin 22:48 5/11/2001 (0)
Need 318 water outlet for my 2002, the - Dwight H. 22:10 5/11/2001 (0)
rubber for front turn signals? - canada matt 21:14 5/11/2001 (2)
- I got mine from Maximillians.... (nt) - John L '75 '02 (Philly PA) 21:37 5/11/2001 (1)
  - ditto - danjrusdug 09:00 5/12/2001 (0)
4:11 differential conversion questions - Nevada72 21:06 5/11/2001 (8)
- 3:90 or 4:11 differential - K.C.K. 08:23 5/12/2001 (5)
  - 4 speed on street-more - Nevada72 10:15 5/12/2001 (4)
    - 4.11 @ 4k = 67 mph....more - Dwight Chew 11:11 5/12/2001 (3)
      - oops-that was supposed to be in the form of a.. - Nevada72 21:05 5/12/2001 (0)
      - What do you think the acceleration....more - Nevada72 20:59 5/12/2001 (1)
        
        Re: What do you think the acceleration....more - Dwight Chew 21:06 5/12/2001 (0)
- Re: 4:11 differential conversion questions - WH 22:29 5/11/2001 (1)
  - TY-that answers them-eom - Nevada72 10:10 5/12/2001 (0)
FOR SALE - Brandon 18:50 5/11/2001 (3)
- Re: FOR SALE Where and how much??? (nt) - Pondering 19:52 5/11/2001 (2)
  - Re: FOR SALE Where and how much??? - Brandon 17:51 5/12/2001 (0)
  - outer space. - anti-man 00:39 5/12/2001 (0)
ALLIGNMENT SPECS HELP! - SQtii/E36M3 18:45 5/11/2001 (6)
- THANKS GUYS! (nt) - SQtii/E36M3 19:36 5/11/2001 (0)
- Re: ALLIGNMENT SPECS HELP! - mikeS 19:19 5/11/2001 (3)
  - Homemade Alignment Tools 101 - Jerry Church '72tii 19:43 5/11/2001 (2)
    - Re: Homemade Alignment Tools 101 - john 21:47 5/11/2001 (1)
      - check your e-mail (nt) - Jerry '72 tii 13:37 5/12/2001 (0)
- Chk. your e-mail....eom - Dwight Chew 19:18 5/11/2001 (0)
Anybody know what ratio diff came with (nt) - 1970 Automatic? Thanks. 18:15 5/11/2001 (3)
- Thanks!! - Both of you. 12:32 5/12/2001 (0)
- yes it is a 3.64 - o2fly 21:34 5/11/2001 (0)
- Haynes says 3.64:1 (nt) - mikeS 18:16 5/11/2001 (0)
HELP me out here,If I found spacers when removing. - Blue 02 17:46 5/11/2001 (4)
- Re: HELP me out here,If I found spacers when remov - Dwight Chew 18:15 5/11/2001 (3)
  - Re: HELP me out here,If I found spacers when remov - Blue 02 18:36 5/11/2001 (2)
    - Re: HELP me out here,If I found spacers when remov - Dwight Chew 19:21 5/11/2001 (0)
    - If you want the Zender kit, e-mail me ASAP! - Gil 18:41 5/11/2001 (0)
"new" 1600 - Pool Man 17:44 5/11/2001 (0)
Center console needed - Rpien 17:43 5/11/2001 (0)
"new" 1969 2002 - Pool Man 17:37 5/11/2001 (2)
- Re: "new" 1969 2002 - Jimmy03 20:05 5/11/2001 (0)
- Check out LaJolla Independent (more) - mikeS 18:13 5/11/2001 (0)
LSD Question... Let me get this Straight.. - Jezebel's Daddy 17:29 5/11/2001 (2)
- Re: LSD Question... Let me get this Straight.. - mongoose 18:19 5/11/2001 (0)
- I think the scoop is.... - Gil 18:17 5/11/2001 (0)
What spark plugs and gap... - jl 17:23 5/11/2001 (4)
- NGK SMALLER #, HOTTER SPARK PLUG OK, OK OK - Rey 74Tii 23:31 5/11/2001 (0)
- Re: What spark plugs and gap... - John L '75 '02 Philly PA 17:38 5/11/2001 (2)
  - Re: whaaaiiitt a minute.... - mongoose 18:18 5/11/2001 (1)
    - hmmmmmm...I learned this from NGK (url) - John L '75 '02 (Philly PA) 21:36 5/11/2001 (0)
FINALLY bought my 02 Today!!!! - rho 17:23 5/11/2001 (2)
- AND THERE's MORE.... - RHO 22:15 5/11/2001 (0)
- Re: FINALLY bought my 02 Today!!!! - EdRasberry 17:30 5/11/2001 (0)
Recaro USA or ???? - Nolan 16:46 5/11/2001 (1)
- Re: Recaro USA or ???? (url) - Mario A. Funk 17:39 5/11/2001 (0)
Anybody see the 2002 on the "CSI" show last night? - Sean 15:24 5/11/2001 (3)
- I did!..... - Ryan Z. 23:21 5/11/2001 (0)
- Re:i watched it - bodyshop 16:32 5/11/2001 (0)
- Sounds like a good show! 8-) - dang 16:12 5/11/2001 (0)
air filter soaked with oil - Rpien 15:13 5/11/2001 (5)
- Re: air filter soaked with oil - Rick 23:06 5/11/2001 (0)
- Re: air filter soaked with oil - Mark 16:22 5/11/2001 (0)
- You've got a pretty tired engine - Gil 15:39 5/11/2001 (2)
  - What? - Tony 16:13 5/11/2001 (1)
    - MacCarntey's 02 Restoration Guide, page 102... - Gil 17:53 5/11/2001 (0)
What to put on plentum gaskets? - Karl S. 15:10 5/11/2001 (4)
- Re: What to put on plentum gaskets? - David Schnabel 16:33 5/11/2001 (1)
  - Made by Permatex EOM - David Schnabel 16:34 5/11/2001 (0)
- 'Copper Gasket' - isn't that what it's called? (nt) - The_Corbinator 16:31 5/11/2001 (0)
- any gasket sealer... - markeest 15:53 5/11/2001 (0)
What is the difference between Weber 32/36 models? - gas2002 15:05 5/11/2001 (4)
- a little info... - Paul (at Maximill...) more... 16:04 5/11/2001 (0)
- Is this correct? - gas2002 15:36 5/11/2001 (2)
  - Yup - electric is automatic tho. - Paul (at Maximill...) EOM 16:14 5/11/2001 (0)
  - Yup! - Paul (at Maximill...) EOM 16:13 5/11/2001 (0)
weber jetting ? - matty 15:00 5/11/2001 (1)
- Re: weber jetting ? - BigDog 15:50 5/11/2001 (0)
Cold cranking AMPS for '72 2002? - scott 14:52 5/11/2001 (2)
- Group 42 will fit... - Q-Boy 16:38 5/11/2001 (0)
- Finding one that fits correctly is the most - Gil 15:49 5/11/2001 (0)
are the porsche guy's making fun of us? - mike 14:48 5/11/2001 (5)
- nano-bots - EdRasberry 17:39 5/11/2001 (0)
- Funny Stuff !!!! (nt) - John L '75 '02 Philly PA 16:43 5/11/2001 (0)
- HILARIOUS!!!!! - Paul (at Maximill...) EOM 16:18 5/11/2001 (0)
- AfterI Perfect My'02,And Win $$, NextCar=Roadster (nt) - josh '72 - '02 15:09 5/11/2001 (0)
- The TRUE meaning of the cartoon....... - Todd Kiger 15:07 5/11/2001 (0)
fuel pump and mpi injection - Dougiefresh 14:06 5/11/2001 (1)
- Injectors rated in lbs/hr - mikeS 16:51 5/11/2001 (0)
2002 Title (reconstructed total) - Rpien 12:56 5/11/2001 (1)
- Depends on the state. (more) - mikeS 13:14 5/11/2001 (0)
OT: Nevada Emission Laws - The_Corbinator 12:50 5/11/2001 (4)
- not to mention the GUN laws! YEEEEEHHHAAAAAAAAAA (nt) - nutty bob 22:24 5/13/2001 (0)
- too late, I'm on my way! - andrey 23:48 5/11/2001 (0)
- SSShhhhhhh... Don't tell the Californians! (nt) - They might all move here! Tkent02 17:02 5/11/2001 (0)
- OT: Florida Emmission Laws - 02 Majik 14:40 5/11/2001 (0)
Bad Grinding Noise...Help - Aaron 75 02 12:45 5/11/2001 (3)
- Might be center bearing - Dakar Doug 21:58 5/11/2001 (0)
- Could be shifter (more) - mikeS 13:54 5/11/2001 (1)
  - Re: Could be shifter (more) - Aaron 75 02 17:34 5/11/2001 (0)
M3 Engine...for sale to make an M2 (url) - Cliff Billett 12:29 5/11/2001 (0)
FYI, big brake upgrade for tii's - Tony 12:10 5/11/2001 (5)
- Were the calipers 2 or 4 piston? - Nelson 13:57 5/11/2001 (2)
  - e12 piston - Tony 15:02 5/11/2001 (1)
    - I think e12 piston area is smaller than Tii - Nelson 09:37 5/12/2001 (0)
- Don't mind my lack of proof reading! - Tony 12:11 5/11/2001 (1)
  - I took that as your accent!! hehe (nt) - Gil 12:13 5/11/2001 (0)
Don't forget about tomorrow!!! (url) (pic) (nt) - Bay Bimmerz 12:08 5/11/2001 (0)
Electrical diagnosis needed - Front lights - Tony 11:49 5/11/2001 (2)
- Re: Electrical diagnosis needed - Front lights - Dwight Chew 13:12 5/11/2001 (0)
- Start by checking yer ground connections thru'out (nt) - Gil 12:21 5/11/2001 (0)
13" wheels and volvo calipers - chris 11:42 5/11/2001 (2)
- Re: 13" wheels and volvo calipers - Todd 13:54 5/11/2001 (0)
- I believe that some folks have - Gil 11:47 5/11/2001 (0)
Queens NYC Car Club Gathering SAT.5/12/01 TOMARROW - ///ARINUTS... 11:34 5/11/2001 (0)
Intake manifold? - 2002c.e. 11:30 5/11/2001 (1)
- Probably a temperature sensor. - mikeS 13:29 5/11/2001 (0)
FYI.. velocity stackes on Ebay....cheap & (url) - John L '75 '02 Philly PA 11:23 5/11/2001 (1)
- They do (more) - 02 Majik 11:57 5/11/2001 (0)
OT: Looking for good shop in W.LA/S. Monica - Corey Turner 11:21 5/11/2001 (0)
tii For Sale - Curt Ingraham 10:56 5/11/2001 (1)
- Re: tii For Sale - Jay 11:02 5/11/2001 (0)
for sale :76 2002 baby blue with factory a/c - Michael Pelletier 10:51 5/11/2001 (2)
- Please, that's Pastellblau. - gas2002 12:28 5/11/2001 (1)
  - or possibly Fjord - Tony 13:16 5/11/2001 (0)
32/36 to 38/38: experiences? - Colin 10:35 5/11/2001 (7)
- Is there a manual choke 38/38? - mikem 16:52 5/11/2001 (1)
  - Re: Is there a manual choke 38/38? - Matt S 17:19 5/11/2001 (0)
- Good $300 investment ....more - Dwight Chew 13:17 5/11/2001 (1)
  - Same manifold or new one? - Dave, 15:43 5/11/2001 (0)
- Re: 32/36 to 38/38: experiences? - Nick Pon 13:15 5/11/2001 (2)
  - Cool! - Colin 13:55 5/11/2001 (1)
    - Guzzi Monza. Those are top notch! Any pics ? - Mr. Fabulous 21:28 5/11/2001 (0)
What's with the high prices 4 interiors? - Nevada72 09:30 5/11/2001 (9)
- Wally's Upholsrty in SF re-did my backseat- $150 (nt) - josh '72 - '02 14:45 5/11/2001 (0)
- I did mine myself (more) - John 13:33 5/11/2001 (0)
- Check out yer local auto upholsterers - Gil 12:19 5/11/2001 (3)
  - I had a set of 2002 fts done for $250 locally. - Josh 13:43 5/11/2001 (0)
  - Gil--define "reasonable" I'm curious - Chuck 12:42 5/11/2001 (1)
    - About $400 Can. (nt) - Gil 15:25 5/11/2001 (0)
- Re: What's with the high prices 4 interiors? - Colin 09:55 5/11/2001 (1)
  - raises another question regarding pads - Nevada72 16:17 5/11/2001 (0)
- I priced out material for my '76 last year and... - Timmer 09:39 5/11/2001 (0)
WWWWOT, sorry but it is just to funny not to share (url) (pic) - Miguel 09:18 5/11/2001 (0)
Springs for sale! - o2pilot 08:40 5/11/2001 (0)
Anyone use Carrera Adj. Camber Plates ? - K.C.K. 08:06 5/11/2001 (2)
- from where? - canada matt 09:14 5/11/2001 (1)
  - Pegasus Racing - K.C.K. 10:32 5/11/2001 (0)
Anyone have Petronix unit part#, Why?(more) - DOG 05:57 5/11/2001 (5)
- Cheers Gents - DOG 21:08 5/12/2001 (0)
- Crane/Allison XR700-0231 - grange 22:20 5/11/2001 (0)
- Re: Anyone have Petronix unit part#, Why?(more) - atlantikblue 11:11 5/11/2001 (0)
- The box I'm looking at has part # 1847 - Mr. Fabulous 08:36 5/11/2001 (1)
  - Correction: Part# 1847A. Bought from Ireland Eng. (nt) - Mr. Fabulous 08:42 5/11/2001 (0)
Salvage Title Purchase - Gary 02:29 5/11/2001 (9)
- No problems here, but I'm still the owner. - frank (CA '71) 16:47 5/11/2001 (0)
- No Insurer will give you full coverage - Ask Why 16:12 5/