bimmer.org forums: BMW 2002 Forum Archive, 2001 week 23

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW 2002 Forum Archive, 2001 week 23

Search Archives

Head aches - Zimedop 23:39 6/10/2001 (1)
- Re: Head aches - Jonathan T. 21:28 6/11/2001 (0)
diff/tranny fluid recommendn? (besides redline) - canada matt 23:13 6/10/2001 (3)
- Redline leaked went to Mobil 1 = : ) - K.C.K. 07:51 6/11/2001 (0)
- Mobil One - Hamish 02:33 6/11/2001 (0)
- kendall. nt - trent tilton -7one 01:45 6/11/2001 (0)
Advice on exhaust system - Art 23:11 6/10/2001 (8)
- Use stock Tii system....more - Colin 10:27 6/11/2001 (0)
- Re: Advice on exhaust system (url) - Dwight Chew 23:41 6/10/2001 (6)
  - I like it LOUD!! - 1putt 00:24 6/11/2001 (5)
    - Did you put a new exhaust on my old car? - ///Merendino 12:46 6/11/2001 (2)
      - Not yet! Nice to hear you've fixed the hesitation - 1putt 08:47 6/12/2001 (1)
        
        Re: Not yet! Nice to hear you've fixed the hesita - ///Merendino 23:50 6/12/2001 (0)
    - Me too. - Dave, 09:03 6/11/2001 (1)
      - Re: Me too. - tiiger 10:43 6/11/2001 (0)
lower door rust - mike 22:41 6/10/2001 (7)
- Door fixes - MitchM 10:58 6/11/2001 (0)
- Try Waxol - Rob J 75 Tii 03:00 6/11/2001 (1)
  - Isn't it Waxoyl? - doug 21:18 6/12/2001 (0)
- Re: lower door rust - Dwight Chew 23:38 6/10/2001 (3)
  - Re: lower door rust - mike 00:55 6/11/2001 (2)
    - Re: lower door rust - Dwight Chew 01:06 6/11/2001 (1)
      - Re: lower door rust - mike dwyer 10:36 6/12/2001 (0)
first impression on 15x6.5 with 38mm offset. (url) - canada matt 21:37 6/10/2001 (1)
- Looks nice....more - Colin 10:32 6/11/2001 (0)
Wanted: Engine swap advice.. - Marsmann 21:34 6/10/2001 (1)
- Re: Wanted: Engine swap advice.. - Colin 08:32 6/11/2001 (0)
sale at Rocky Mountain - david 73tii ceylon 21:31 6/10/2001 (0)
Kuglefischer Master in Tampa/Sarasota area? - Defiant 21:13 6/10/2001 (2)
- Re: Kuglefischer Master in Tampa/Sarasota area? - John Weese 09:22 6/11/2001 (1)
  - Thanks John! - Defiant 20:54 6/11/2001 (0)
MidWestFest=tons-o-fun - nevada 72 21:13 6/10/2001 (0)
195/50/15 tires-which ones? - nevada 72 20:55 6/10/2001 (12)
- Toyo RA-1 if you like 'em sticky! - stevetall 21:59 6/11/2001 (0)
- Nobody likes Dunlops or Pirelli's? - Q-Boy 14:37 6/11/2001 (1)
  - P700Z's are good.... $44 each at www.tirerack.com - Derek 14:49 6/11/2001 (0)
- I enoy my Potenza RE71's but... - God your lame 00:23 6/11/2001 (4)
  - Yoko AVS don't hold up at autox driving school? (nt) - Monte 07:54 6/11/2001 (2)
    - Example wear... - Andy 02 13:09 6/11/2001 (0)
    - Re: Yoko AVS don't hold up at autox driving school - 02 Majik 08:06 6/11/2001 (0)
  - Sorry "Lame" is from a previous spam post. didn't - mean to offend - 02 Majik 00:25 6/11/2001 (0)
- michelin pilot sports are amazing (nt) - RobS. 22:08 6/10/2001 (0)
- Yoko AVS-I... excellent (nt) - pmm 21:33 6/10/2001 (0)
- yoko AVS Ints. PERIOD. nt - trent tilton -7one 20:58 6/10/2001 (1)
  - Thanks Y'all (nt) - nevada 72 12:38 6/11/2001 (0)
Wanted: pistons (I think), engine mod in progress - Josh Cook 20:37 6/10/2001 (0)
Pontiac 6000 - Dave bate 19:40 6/10/2001 (3)
- try going here... (url) - Lars F. 09:26 6/11/2001 (0)
- 18273645 Just a guess No real clue though. - 02 Majik 00:37 6/11/2001 (0)
- Boy, are you in the wrong place! Ans.=no idea..nt - Dwight Chew 19:49 6/10/2001 (0)
how much time to change rear subframe bushings? - canada matt 19:13 6/10/2001 (5)
- I takes one hour... with experience. (nt) - Lee 20:14 6/10/2001 (0)
- Re: how much time to change rear subframe bushings - Dwight Chew 19:17 6/10/2001 (3)
  - i mean the other ones (i think!) - canada matt 19:20 6/10/2001 (2)
    - Re: i mean the other ones (i think!) - Andrej Gaspari 19:33 6/10/2001 (1)
      - Re: i mean the other ones (i think!) - John Aho 20:30 6/10/2001 (0)
momo steering wheel.. can't start car? - canada matt 18:42 6/10/2001 (7)
- Maybe the little gizmo that prevents starting - untill you turn the key off...Tkent02 12:20 6/11/2001 (0)
- Re: momo steering wheel.. can't start car? - peter i 23:14 6/10/2001 (0)
- Re: momo steering wheel - Carl 21:46 6/10/2001 (1)
  - question for carl - canada matt 22:31 6/10/2001 (0)
- Re: momo steering wheel.. can't start car? - Dwight Chew 19:31 6/10/2001 (0)
- heres a pic of the hub/wheel.. (url) - canada matt 19:11 6/10/2001 (1)
  - Re: heres a pic of the hub/wheel.. - Hoa 02:11 6/11/2001 (0)
Beauty from Boston! (url) (pic) - BMW4life! 18:07 6/10/2001 (2)
- nice car! U bringing it to Brookline on the 17th? - Ryan Z. 18:33 6/10/2001 (1)
  - sorry, read that wrong... - Ryan Z. 18:36 6/10/2001 (0)
Looking for a good home for a half restored wreck - Gary Surtel 17:59 6/10/2001 (0)
fuel mileage - Mauricio 17:56 6/10/2001 (1)
- Re: fuel mileage - grimace 12:16 6/11/2001 (0)
Fuel tank-need some help PLEASE!!! - dougiefresh 17:48 6/10/2001 (8)
- Re: Fuel tank-need some help PLEASE!!! - Colin 10:39 6/11/2001 (1)
  - beware!!! return fuel PSI can go over 30+ - RobS. 13:46 6/12/2001 (0)
- Look at the E21 fuel pump setup....eom - Dwight Chew 17:50 6/10/2001 (5)
  - what about the "T" idea? Where can i find info? - dougiefresh 18:00 6/10/2001 (4)
    - Re: what about the "T" idea? Where can i find info - Dwight Chew 19:35 6/10/2001 (3)
      - ummm.... - dougiefresh 01:34 6/11/2001 (2)
        
        I like the T idea, Sounds good - Cameron A. 16:52 6/11/2001 (1)
        
        Re: I like the T idea, Sounds good - dougiefresh 17:02 6/11/2001 (0)
An 02 sighting in Lisbon, Portugal (WOT) - Andrew 17:08 6/10/2001 (4)
- LISBON,Portugal, here!! - Dinis Gomes 19:15 6/10/2001 (1)
  - WOT=way off topic or waste of time - RobS. 22:01 6/10/2001 (0)
- interesting sightings arent WOT!!!!!!!!!! (nt) - RobS. 17:31 6/10/2001 (1)
  - Well, just CYA against potential flames :) (nt) - Andrew 18:17 6/10/2001 (0)
Crank needed in LA - Please help. I'm screwed - Da Hose 16:12 6/10/2001 (1)
- Re: Crank needed in LA - Please help. I'm screwed - j.thadeus toad 09:05 6/11/2001 (0)
Is it a sin to use Autometer? - X 15:54 6/10/2001 (3)
- I have full set of autometers (url) - RobS. 16:02 6/10/2001 (2)
  - Amazing electronics... Looks great! (nt) - Hugo 16:37 6/10/2001 (0)
  - maybe this pic will work (pic) - RobS. 16:04 6/10/2001 (0)
Ping w/ Pertronix - Curt 15:43 6/10/2001 (3)
- hmm....interesting..I will have to try it (nt) - John L '75 golf '02...Philly Pa 18:08 6/10/2001 (2)
  - Here's the quote and url where it came from (url) - Curt 19:12 6/10/2001 (1)
    - thnx....(eom) (nt) - John L '75 '02 Philly PA 08:01 6/11/2001 (0)
Chat is OPEN - Help me with a crankshaft problem (nt) - Da Hose 15:36 6/10/2001 (2)
- we figured it out (crank problem) chats closed now (nt) - RobS. 17:01 6/10/2001 (0)
- im there too... yahoo seems to be freaking out - try both dahose01 and doctabob2002 15:41 6/10/2001 (0)
Hella 500 covers - Bill in MT 15:26 6/10/2001 (1)
- thanx, but someone's already shipping me some (nt) - Ryan Z. 18:39 6/10/2001 (0)
Stock brake parts - Anyone want em? - Da Hose 15:16 6/10/2001 (0)
Spotted faded verona (red) 1600 in SF yesterday - RobS. 14:29 6/10/2001 (0)
i think my swaybar is upside down (aka, @#$@#$!!!) - canada matt 13:26 6/10/2001 (4)
- Check your e-mai for jpeg...eom - Dwight Chew 13:46 6/10/2001 (1)
  - Thanks dwight! - canada matt 19:23 6/10/2001 (0)
- argh, it IS wrong. aarrrghhhhhhhhhhhhhhhhh (nt) - canada matt 13:39 6/10/2001 (1)
  - changed it in 35 minutes!!!! (pure brute force) (nt) - canada matt 17:54 6/10/2001 (0)
002 dist - is advance to the right or left? - Curt 13:06 6/10/2001 (3)
- Re: 002 dist - is advance to the right or left? - bolter 13:36 6/10/2001 (2)
  - Are you saying the distributor rotates clockwise? - dougiefresh 21:29 6/11/2001 (0)
  - That's what I thought and the results I was get'ng - Curt 14:37 6/10/2001 (0)
Breaking in the new camera (url) - dhs 11:15 6/10/2001 (6)
- How? - Brian C 15:16 6/10/2001 (5)
  - Re: How? - dhs 16:04 6/10/2001 (4)
    - Re: How? (pic) - dhs 17:14 6/10/2001 (0)
    - VERY interesting setup... whats with the bracing?? (nt) - RobS. 17:02 6/10/2001 (2)
      - Bracing is for q-panel and rocker removal (more) - dhs 17:27 6/10/2001 (1)
        
        aha thanks! (nt) - RobS. 17:33 6/10/2001 (0)
2002 Turbo in Seattle - the search continues... - Todd 11:10 6/10/2001 (2)
- Try to be what we aren't....more - Dwight Chew 13:57 6/10/2001 (1)
  - Re: Try to be what we aren't....more (url) - a54atii 21:43 6/10/2001 (0)
Help needed w/crank -Urgent- Please read - Da Hose 11:10 6/10/2001 (4)
- Re: Help needed w/crank -Urgent- Please read - shermanmartinez 14:06 6/10/2001 (3)
  - Re: Help needed w/crank -Urgent- More info. - Da Hose 14:52 6/10/2001 (2)
    - Re: Help needed w/crank -Urgent- More info. - Da Hose 15:12 6/10/2001 (0)
    - Re: Help needed w/crank -Urgent- More info. - Da Hose 15:12 6/10/2001 (0)
Rear discs + Recaros + more For Sale..... (url) (pic) - Teaguer 02:46 6/10/2001 (2)
- Do they slip right in or...(more) - Dave, 09:22 6/11/2001 (1)
  - Re: Do they slip right in or...(more) (pic) - Teaguer 12:51 6/11/2001 (0)
URGENT Getrag 245 Questions - Siezed up?? - josh '72 -'02 00:27 6/10/2001 (8)
- 1 3/16 deep well @ Napa - More. - K.C.K. 08:55 6/10/2001 (1)
  - Re: 1& 3/16 deep well for O2 sensor @ autozone - Tom D 13:01 6/10/2001 (0)
- Getrag 245 Questions - Siezed up?? - Peter 01:33 6/10/2001 (0)
- Re: URGENT Getrag 245 Questions - Siezed up?? - Dwight H. 00:38 6/10/2001 (4)
  - WE GOT IT FUGURED OUT. Thanks! Dwight-WeGotDa Tank (nt) - josh '72 -'02 19:43 6/10/2001 (0)
  - WE GOT IT FUGURED OUT. Thanks! Dwight-WeGotDa Tank (nt) - josh '72 -'02 19:43 6/10/2001 (0)
  - Re:Don't need a deep socket ,U need a THIN one.... (pic) - Teaguer 01:52 6/10/2001 (1)
    - Re:Don't need a deep socket ,U need a THIN one.... (pic) - Rob J 75 Tii(EOM) 09:33 6/10/2001 (0)
URGENT Getrag 245 Questions - Siezed up?? - josh '72 -'02 00:27 6/10/2001 (0)
my 2002 is mad at me - brad 00:26 6/10/2001 (2)
- Re: my 2002 is mad at me - Dwight Chew 00:50 6/10/2001 (1)
  - Re: my 2002 is mad at me - brad 00:54 6/10/2001 (0)
its finally on all 4's!!! booyah!!! (url) - canada matt 00:23 6/10/2001 (12)
- Nice work!... - David Schnabel 11:24 6/11/2001 (0)
- Nice car! (pic) - Hoa 18:08 6/10/2001 (5)
  - what kind of front airdam is this? i want one... (nt) - danw2002 00:32 6/11/2001 (1)
    - Re: what kind of front airdam is this? i want one. - Tommy 01:33 6/11/2001 (0)
  - isn't that goodfellas? tommy? nt - trent tilton -7one 20:16 6/10/2001 (1)
    - Hey, you're right. (url) (nt) - Hoa 21:09 6/10/2001 (0)
  - i'm not sure (more) - canada matt 18:43 6/10/2001 (0)
- Looks Bitchin' DOGGG!!!! (url) - Elliot 16:56 6/10/2001 (0)
- Re: its finally on all 4's!!! booyah!!! - Todd 11:04 6/10/2001 (0)
- Looks GREAT. lookfwd to yr list of mods etc. nt (url) - DOG 04:10 6/10/2001 (0)
- shweet! just dont rub it in too much ;) ----more (url) - markeest 01:15 6/10/2001 (1)
  - in winnipeg.. - canada matt 22:53 6/10/2001 (0)
URGENT Getrag 245 Questions - Siezed up?? - josh '72 -'02 00:23 6/10/2001 (0)
2002s in Wichita Ks Sunday - Lake Afton Car Show.. (url) - Keith 1974tii 00:20 6/10/2001 (0)
320is in Salvage Yard Today. I have questions. - Dave in Dallas 23:54 6/09/2001 (3)
- Re: 320is in Salvage Yard Today. I have questions. - K.C.K. 09:03 6/10/2001 (1)
  - Get backing plates along with rear drums! (more) - mikeS 12:59 6/10/2001 (0)
- Condition of interior stuff? - mikem 09:01 6/10/2001 (0)
Turbo-nuts, anyone want a 1987 SVO 2.3? $550 - Engine, harness, complete. Tkent02 23:47 6/09/2001 (0)
Slightly OT. Bought a diff. today and need advice - Dave in Dallas 23:45 6/09/2001 (0)
BREAKAGE polaris 500 mag pipe - james gwaltney 22:18 6/09/2001 (0)
FS: Early Seats - malagaman 20:38 6/09/2001 (1)
- Check you email - Dave R. 91 35i, 71 02 17:08 6/11/2001 (0)
torque setting for top of rear shock (bilstein)? - canada matt 20:23 6/09/2001 (4)
- Re: torque setting for top of rear shock (bilstein - Brian C 00:39 6/10/2001 (0)
- Re: torque setting for top of rear shock (bilstein (url) - Dwight Chew 23:18 6/09/2001 (2)
  - hmm, no torque setting.. thx dwight! (nt) - canada matt 00:27 6/10/2001 (1)
    - Rubber is a wierd material....more - Dwight Chew 00:55 6/10/2001 (0)
SOT: praise for Volvo engine block. - mikeS 19:40 6/09/2001 (5)
- Re: SOT: praise for Volvo engine block. - Colin 08:43 6/11/2001 (1)
  - what are bore/stroke diff between volvo b21 and - BMW M10? Rob S. 16:10 6/11/2001 (0)
- Re: SOT: praise for Volvo engine block. - Marty 01:03 6/10/2001 (0)
- Re: SOT: praise for Volvo engine block. - Justin 23:21 6/09/2001 (0)
- Re: SOT: praise for Volvo engine block. - Earl Myers 21:59 6/09/2001 (0)
anyone know where i can find a trunk lock? - Reid 19:15 6/09/2001 (1)
- Re: anyone know where i can find a trunk lock? - Dwight Chew 23:20 6/09/2001 (0)
Bosch Dizzy # ?'s - K.C.K. 18:53 6/09/2001 (1)
- TII replacement. - mikeS 19:26 6/09/2001 (0)
Money Magazine finds the '02 - david 73tii ceylon 18:42 6/09/2001 (6)
- Peter S. you got screwed! - send him a love letter...Karl S. 13:38 6/11/2001 (0)
- pg. 70 (pic) - Tom 23:02 6/09/2001 (4)
  - Re: pg. 70 - Jumbo2002ti 02:56 6/10/2001 (3)
    - Re: pg. 70 - Tom 13:04 6/10/2001 (2)
      - See if this works. (pic) - Hoa 13:39 6/10/2001 (1)
        
        Link to the article. (url) - Hoa 13:53 6/10/2001 (0)
E bay ripoff artist-beware! - Mel A 18:06 6/09/2001 (5)
- Thanks for the heads-up - I always search eBay 02s (nt) - sb 15:36 6/11/2001 (0)
- Re: thanks for the warning(eom) - EdRasberry '72 - 02 09:23 6/10/2001 (0)
- That's how he is driving a Dinan supercharged 540! - 1putt 02:20 6/10/2001 (0)
- Re: E bay ripoff artist-beware! - dougiefresh 01:16 6/10/2001 (0)
- Re: E bay ripoff artist-beware! - //// 23:23 6/09/2001 (0)
1984 318 engine with 5-speed into 2002? - Daniel Kozan 18:00 6/09/2001 (1)
- Re: 1984 318 engine with 5-speed into 2002? - R J 75 Tii 05:21 6/10/2001 (0)
hack hotmail - TheHacker 17:29 6/09/2001 (6)
- Send me your ATM card (nt) - and PIN # 19:12 6/09/2001 (0)
- Send me your username and password please - God your lame 19:02 6/09/2001 (0)
- piss off (nt) - mofo 18:19 6/09/2001 (0)
- This is a password troll, DONT DO IT (more) - Corey Turner 18:01 6/09/2001 (1)
  - I'm too lazy to do it anyways...my anit-theft - dougiefresh 01:17 6/10/2001 (0)
- Do you think were that fucking dumb? - jb 17:57 6/09/2001 (0)
How to hack a hotmail password easily - Hacker 17:27 6/09/2001 (2)
- Looks like this guy was thrown off before I could (nt) - send him a love letter...Karl S. 11:07 6/11/2001 (0)
- who cares? Get a life! - Dave, 09:24 6/11/2001 (0)
BMWs AT DENVER CAR SHOW THIS SUNDAY - Sumi in Colorado 17:21 6/09/2001 (1)
- Re: BMWs AT DENVER CAR SHOW THIS SUNDAY - Phil 17:09 6/10/2001 (0)
To ping or not to ping - that is the question ... - Curt 17:15 6/09/2001 (4)
- Adv. = right/Retard = Left. - standing @ Pass Fend - K.C.K. 09:11 6/10/2001 (0)
- Ping at what RPM? - mikeS 19:30 6/09/2001 (2)
  - Intermediate range (m) - Curt 19:42 6/09/2001 (1)
    - Not normal... - mikeS 12:52 6/10/2001 (0)
W.O.T., but have to share....more - Juan Cardona 17:00 6/09/2001 (1)
- torque is bloody lovely!! - RobS. (yahoo ID: doctabob2002) 14:36 6/11/2001 (0)
02 transmixer/motor swap - New 2 02 16:26 6/09/2001 (0)
Anyone see the 70 02 on TV this morning......... - Stephen B. 15:39 6/09/2001 (1)
- I digitized the clip. you want me to email it to (nt) - you? (its BIG!!!!!!) RobS. 17:49 6/10/2001 (0)
What should I do with an 83 320i, I - Dwight H. 15:07 6/09/2001 (5)
- Talk to Peter Siposs...more (url) - Dwight Chew 16:46 6/09/2001 (0)
- Re: What should I do with an 83 320i, I - New 2 02 16:27 6/09/2001 (3)
  - So. Cal - Dwight H. 17:21 6/09/2001 (2)
    - Does it have working AC? (nt) - Tkent02 23:52 6/09/2001 (1)
      - Re: Does it have working AC? - Dwight H. 00:33 6/10/2001 (0)
02 quiz......... who is this?. - kevin 75Tii 14:50 6/09/2001 (1)
- eat my wet ass jerk (nt) - RobS. 14:39 6/10/2001 (0)
Hard to shift - New 2 02 14:40 6/09/2001 (0)
which volvo caliper is left, which is right? - canada matt 13:56 6/09/2001 (1)
- nervermind, i got it (duh, the top!) (nt) - canada matt 14:04 6/09/2001 (0)
15x7 Primax wheels (url) - Cameron A. 13:02 6/09/2001 (2)
- Re: 15x7 Primax wheels - Monte 16:29 6/09/2001 (0)
- Re: 15x7 Primax wheels - 02 Maik 16:22 6/09/2001 (0)
#4 Plug fell out! HELP!!! - Zimedop 12:53 6/09/2001 (7)
- not hard... - dougiefresh 17:24 6/09/2001 (2)
  - Re: not hard... - Zimedop 22:05 6/09/2001 (1)
    - ask a mechanic, they do it all the time - dougiefresh 22:33 6/09/2001 (0)
- Re: #4 Plug fell out! HELP!!! - Dwight H. 14:11 6/09/2001 (0)
- Re: #4 Plug fell out! HELP!!! - Peter S 13:12 6/09/2001 (1)
  - I did this Heli-coil and the debris - ruined a rod bearing. more. Tkent02 13:30 6/09/2001 (0)
- Special repair kits are available....more - Dwight Chew 12:57 6/09/2001 (0)
Question on fuel return lines - dougiefresh 12:50 6/09/2001 (0)
Zender Trunk Lip: how to align? - Jonathan T. 12:31 6/09/2001 (2)
- Re: Zender Trunk Lip: how to align? - Andrej Gaspari 13:10 6/09/2001 (1)
  - Re: Zender Trunk Lip: how to align? - Jonathan T. 13:38 6/09/2001 (0)
Kosei K1 Racing Wheels Info Needed - Jon Ladd 11:47 6/09/2001 (4)
- Lots of us fitting wheels...Tire Rack says...(m) - Monte 17:01 6/09/2001 (2)
  - Re: Lots of us fitting wheels...Tire Rack says...( - Jon Ladd 19:00 6/09/2001 (1)
    - and your 13"s are stacked where? - gregL. 20:58 6/11/2001 (0)
- Re: Kosei K1 Racing Wheels Info Needed - Jonathan T. 12:54 6/09/2001 (0)
riddle me this? - tim 09:49 6/09/2001 (6)
- Re: riddle me this? - dang 16:38 6/09/2001 (0)
- Shouldn - southbay_gabe 16:38 6/09/2001 (1)
  - Darn enter key...(m) - southbay_gabe 16:43 6/09/2001 (0)
- depends on where it is. - dougiefresh 12:41 6/09/2001 (0)
- Suck it out- (nt) - Wouldn't that taste bad? Tkent02 10:26 6/09/2001 (1)
  - probably but a small sacrifice for the better 02 (nt) - tim 11:06 6/09/2001 (0)
Do you know your '02 0-60 time? (nt) - (Claimed or otherwise) 09:03 6/09/2001 (8)
- 9.4 w/Weber 32/36 & 200-lb passenger. g-tech - Hoa 13:59 6/10/2001 (0)
- 7.8 with 38/38, 292, header, exhaust with g-tech.. - Stephen B. 15:35 6/09/2001 (2)
  - what pistons do you guys run? EOM - Nick Pon 18:16 6/09/2001 (1)
    - I currently am putting on some 9.5:1 euro tii, but - Stephen B. 19:23 6/09/2001 (0)
- 8.0 w/carb, headers, exhaust, and weight reduction - dougiefresh 12:42 6/09/2001 (2)
  - What carb? (nt) - Cameron A. 12:46 6/09/2001 (1)
    - Re: What carb? - dougiefresh 12:51 6/09/2001 (0)
- 5.5 - Lars F. 11:30 6/09/2001 (0)
Cruise and show & shine (url) - '88 325e 08:47 6/09/2001 (0)
ground question - tim 08:08 6/09/2001 (0)
Quieting the output shaft - Which Oil? - Steve/CrzyCar 06:31 6/09/2001 (0)
1976 2002 - jeff 03:18 6/09/2001 (0)
Dual Side Draft Question - RHO 02:25 6/09/2001 (6)
- Mechanical should work fine..... - vince 20:22 6/09/2001 (0)
- Use press. reg./elec. pump-- OR this Mallory (m) (url) - Monte 11:48 6/09/2001 (0)
- Mopar electric = Cheap & Easy 2.5lb low pressure - K.C.K. 06:56 6/09/2001 (2)
  - year or part no. ?? - Nolan 11:25 6/09/2001 (1)
    - I will look tomorrow and reply - K.C.K. 18:55 6/09/2001 (0)
- use electrical. reliable. nt - trent tilton -7one 03:05 6/09/2001 (0)
'02 racer in this month's C&SC (pic) - Hoa 01:33 6/09/2001 (3)
- Those guys are awesome! - Nick Pon 18:20 6/09/2001 (2)
  - Re: Those guys are awesome! (url) - Hoa 14:12 6/10/2001 (1)
    - haha eat that porsche boarders!! - RobS. 03:07 6/11/2001 (0)
anyone have Chriss Talley's email or ....... - Nolan 00:47 6/09/2001 (3)
- chris@talley.net or - trent tilton -7one 03:04 6/09/2001 (2)
  - No email address on his site....... - Nolan 11:34 6/09/2001 (1)
    - uh...his email is two lines above. nt - trent tilton -7one 12:01 6/09/2001 (0)
Does anyone have brake ducts to backing plate (nt) - Blue02 23:28 6/08/2001 (4)
- duct them to the inside of the brake disk....nt (nt) - danw2002 02:36 6/09/2001 (3)
  - ummmm....... - Allen 21:40 6/09/2001 (2)
    - Thanks for the warping advice! - Blue02 05:23 6/10/2001 (1)
      - Re: Thanks for the warping advice! - Dwight Chew 14:46 6/10/2001 (0)
Freeon - Christos 22:31 6/08/2001 (2)
- Re: Freeon - Dwight H. 23:06 6/08/2001 (0)
- Re: Freeon - dhs 23:05 6/08/2001 (0)
Rear license plate bracket for '73? - GT 20:55 6/08/2001 (2)
- Re: Rear license plate bracket for '73? - adrian 08:38 6/09/2001 (1)
  - Yes, not kosher... - GTOM 13:34 6/09/2001 (0)
Need advice on rebuild of steering box. - cw 20:50 6/08/2001 (3)
- If it's tight, just clean and... - mikeS 15:48 6/09/2001 (0)
- I hear rebuilt units are $275 - Jerry '72 tii 22:45 6/08/2001 (1)
  - Re: I hear rebuilt units are $275 - Da Hose 14:44 6/09/2001 (0)
Midwest '02 Fest is TOMORROW - JRB 20:47 6/08/2001 (1)
- Hey Chuck-what time tomorrow? - Nevada72 21:24 6/08/2001 (0)
Distributor Dilemma - Dakar Doug 20:33 6/08/2001 (5)
- Low CR= Vac advance /High CR = Tii dizzy - (n/t) Jonathan T. 23:02 6/08/2001 (0)
- Re: Distributor Dilemma - Dan 72 '02 22:37 6/08/2001 (0)
- Re: Distributor Dilemma - Dwight H. 20:45 6/08/2001 (2)
  - How do you tell diff between adv. & retard (nt) - Cameron A. 12:44 6/09/2001 (1)
    - Re: How do you tell diff between adv. & retard - darrell 20:55 6/09/2001 (0)
Interesting dizzy on Ebay (url) (nt) - mikeS 19:02 6/08/2001 (3)
- Re: Interesting dizzy on Ebay - bolter 11:57 6/09/2001 (2)
  - Mallory dizzys... - mikeS 15:51 6/09/2001 (1)
    - I run one - 02 Maik 16:28 6/09/2001 (0)
2002 Turbo original flares-still available? - DH 18:32 6/08/2001 (4)
- $89.00 ea. ask re: spoiler too! - Paul (at Maximill..) more... 08:58 6/11/2001 (0)
- Jaymic do reproductions at fraction of BMW price - Rob J 75 Tii(EOM) 06:52 6/10/2001 (0)
- In Europe from the BMW dealer! - Hugo 05:59 6/09/2001 (0)
- Try Maxamillian - Tony 18:58 6/08/2001 (0)
what intake mods can i do to my 2002?eom (nt) - 2002freak 17:52 6/08/2001 (0)
WTB: 38/38 weber carb - jl 17:34 6/08/2001 (0)
dirty (oily?) water out the exhaust? - Nick Pon 16:05 6/08/2001 (3)
- Re: dirty (oily?) water out the exhaust? - Dwight H. 23:19 6/08/2001 (0)
- Re: dirty (oily?) water out the exhaust? - Dwight Chew 16:19 6/08/2001 (0)
- Re: dirty (oily?) water out the exhaust? - Da Hose 16:17 6/08/2001 (0)
Does 32/36 require a return line to the tank? - Cameron A. 15:55 6/08/2001 (3)
- Repeat reply - mikem 22:05 6/08/2001 (0)
- No (eom) - John Weese 15:59 6/08/2001 (0)
- Re: Does 32/36 require a return line to the tank? - Nick Pon 15:58 6/08/2001 (0)
Hubcentric wheels - Eero Maki 15:36 6/08/2001 (2)
- Re: Hubcentric wheels - Paul 15:39 6/08/2001 (1)
  - H&R makes hubcentric spacers.. - canada matt 16:11 6/08/2001 (0)
15"x7" wheels with 30mm offset Any experiences? - Tony 15:31 6/08/2001 (10)
- I ordered 29mm-supposedly works-30 should 2 - Nevada72 21:26 6/08/2001 (1)
  - oops-disregard-mine are 15x6 - Nevada72 21:28 6/08/2001 (0)
- BBS 15x7, 18mm offset + 1/8 in spacer on front - stevetall 19:34 6/08/2001 (0)
- Just got new 15x7 ET18 panasports today but - Corey Turner 16:18 6/08/2001 (6)
  - Er, DONT buy 60's. My mistake, gotta go get 50's - Corey Turner 21:43 6/08/2001 (0)
  - Actually you wheels wouldn't fit regular bodywork - Tony 19:00 6/08/2001 (0)
  - Offset for 15x6 is 29mm - Dave, 17:20 6/08/2001 (0)
  - Is that the std offset for those wheels? - SV 17:06 6/08/2001 (0)
  - Why didn't you go with a 50 series tire? - Gary 16:38 6/08/2001 (0)
  - Re:Your car is sounding Very Cool!(more) - EdRasberry '72 -'02 16:35 6/08/2001 (0)
My window crank just broke. - Byron 14:44 6/08/2001 (11)
- The right choice........ - '72 Bavaria 23:49 6/08/2001 (0)
- window crank - Kevin 14:55 6/08/2001 (9)
  - A fifth choice - Jerry Church '72tii 16:13 6/08/2001 (4)
    - I TRIED to get it, MB said it did'nt exist..... - Kevin 16:18 6/08/2001 (3)
      - Re: I TRIED to get it, MB said it did'nt exist.... - Jerry Church '72tii 16:20 6/08/2001 (2)
        
        The package says... A 115 725 00 15 - Jerry '72 tii 22:43 6/08/2001 (0)
        
        Great! (nt) - Kevin 16:56 6/08/2001 (0)
  - Fourth choice - John N. 15:35 6/08/2001 (2)
    - Ah, the voice of patience and skill..... (nt) - Kevin 15:53 6/08/2001 (0)
    - Ah, the voice of patience and skill..... (nt) - Kevin 15:53 6/08/2001 (0)
  - Yea, that's what I was thinking of doing. - Byron 14:58 6/08/2001 (0)
Free seats - Andrej Gaspari 14:36 6/08/2001 (0)
Early bumpers FS - Andrej Gaspari 14:33 6/08/2001 (0)
Stereo on the fritz .....any ideas? - John L '75 '02 Philly PA 14:26 6/08/2001 (1)
- loose wire/bad connection on speaker - dougiefresh 14:58 6/08/2001 (0)
Brake Swap ( Need further Info. than Archive) - Ask-Why 14:20 6/08/2001 (3)
- I have a pair of 77 320 calipers if you need... (url) - Don C 09:18 6/09/2001 (0)
- '77 vented calipers bolt right on, then (more) - rob h 06:28 6/09/2001 (0)
- Many 320i calipers have 1-line... - mikeS 14:39 6/08/2001 (0)
Is K&N filte4r oil anything special? (nt) - or just ATF or MMO or? Tkent02 14:11 6/08/2001 (1)
- I use MMO. Seems to work. (nt) - mikeS 14:42 6/08/2001 (0)
kirk racing cage? - canada matt 14:03 6/08/2001 (3)
- Re: kirk racing cage? - william 22:53 6/08/2001 (1)
  - William, you have pics of it? (nt) - canada matt 00:35 6/09/2001 (0)
- Re: kirk racing cage? - Todd 14:51 6/08/2001 (0)
What ratio rearends are the best with a five-speed - Derek Jones 13:49 6/08/2001 (2)
- 3.91 are most common, work well w/5 speed. (nt) - mikeS 13:58 6/08/2001 (1)
  - Thanks it's appreciated - Derek Jones 14:27 6/08/2001 (0)
LSD gear oil? - Eero Maki 13:43 6/08/2001 (2)
- Mobil 1 - Cheaper & not as noisy. - K.C.K. 16:54 6/08/2001 (0)
- Redline. (nt) - mikeS 13:58 6/08/2001 (0)
E30 Black Sport Seats recently acquired. - Dave R. 91 35i, 71 02 13:30 6/08/2001 (4)
- It can be done - but tough! Paul (at Maximill..) more... 15:11 6/08/2001 (0)
- Re: E30 Black Sport Seats recently acquired. - SV 14:37 6/08/2001 (2)
  - Northern VA. Is there an easy way of shipping? - Dave R. 91 35i, 71 02 15:02 6/08/2001 (1)
    - Is the pony express still in business? (more) - SV 17:09 6/08/2001 (0)
How to tell if 320i diff is LSD????? - Jim 12:48 6/08/2001 (6)
- http://www.bimmers.com/02/ - diff linke - canada matt 16:12 6/08/2001 (0)
- One more question????? - Jim 14:28 6/08/2001 (1)
  - Re: One more question????? - Matt S 16:10 6/08/2001 (0)
- Big S stamped on side in white and on tag (nt) - Chris R '74 tii 12:57 6/08/2001 (0)
- turn it.... - trent tilton -7one 12:55 6/08/2001 (1)
  - Re: turn it.... - Matt S 13:23 6/08/2001 (0)
anyone use VHT Flame Proof 1500C paint? - canada matt 12:16 6/08/2001 (3)
- You know you have to cure that paint at75% of 1500 - right-more Stephen B. 01:27 6/09/2001 (0)
- Have you tried krylon? - 02 Majik 12:39 6/08/2001 (0)
- Re: anyone use VHT Flame Proof 1500C paint? - Dwight Chew 12:30 6/08/2001 (0)
Fumed grills !!! - pierre� 12:07 6/08/2001 (2)
- Grills - 3M it! - Mitch M. 15:59 6/08/2001 (0)
- painting grills... - trent tilton -7one 12:39 6/08/2001 (0)
Blue smoke on decel. from high rev. What did I do? - Bryan 11:56 6/08/2001 (13)
- Re: Blue smoke on decel. from high rev. What did I - Dwight H. 16:54 6/08/2001 (2)
  - You can R&R seals with head on car. - Ask me how. Tkent02 17:24 6/08/2001 (1)
    - Re: You can R&R seals with head on car. - Dwight H. 20:52 6/08/2001 (0)
- At least it's not white smoke - Mitch M. 15:49 6/08/2001 (0)
- At least it's not white smoke - Mitch M. 15:46 6/08/2001 (0)
- Fixed mine out of a can! - Silvanator 13:09 6/08/2001 (0)
- Payback the jerks that cut you off :-) - Jumbo2002ti 12:07 6/08/2001 (4)
  - Re.: Payback the jerks- This isn't right - Concerned 02 Owner 01:58 6/09/2001 (1)
    - install spark plug in tailpipe and really burn oil (nt) - hehe torch city 22:16 6/10/2001 (0)
  - rings=accel deccel=valve stem seals (common) - dougiefresh 15:01 6/08/2001 (1)
    - smoke=rings and smoke=rings - BigDog 18:42 6/08/2001 (0)
- As Mike S said, fairly typical....more - Dwight Chew 12:06 6/08/2001 (0)
- Not uncommon... - mikeS 12:02 6/08/2001 (0)
2002 parts- P.A. - tim 11:51 6/08/2001 (2)
- John Weese, where are you? Got $$...eom - Dwight Chew 11:56 6/08/2001 (1)
  - Re: John Weese, where are you? Got $$...eom - John Weese 15:21 6/08/2001 (0)
Wet Plug Wires - Tony 11:51 6/08/2001 (5)
- Re: Wet Plug Wires - john 13:35 6/08/2001 (0)
- Re: Wet Plug Wires - 02 Majik 12:47 6/08/2001 (0)
- Re: Wet Plug Wires - Dwight Chew 11:55 6/08/2001 (0)
- Re: Wet Plug Wires - Dwight H. 11:54 6/08/2001 (1)
  - Betcha it's water in the dist. - Silvanator 14:49 6/08/2001 (0)
Grounding Question - Hokie 11:40 6/08/2001 (2)
- Ground locations in a '02 - Dwight Chew 11:53 6/08/2001 (0)
- Re: Grounding Question - Dwight H. 11:52 6/08/2001 (0)
exhaust question, bend or weld? - canada matt 11:37 6/08/2001 (3)
- Re: exhaust question, bend or weld? - Dwight Chew 12:02 6/08/2001 (0)
- Re: exhaust question, bend or weld? - Dwight H. 11:56 6/08/2001 (1)
  - thanks guys! - canada matt 12:10 6/08/2001 (0)
Ignition Timing 1975 2002 - 2002 Dublin 11:23 6/08/2001 (0)
Anyone out there have front brake ducts, or Ideas (nt) - blue02 10:59 6/08/2001 (3)
- I do - 02 Majik 12:50 6/08/2001 (2)
  - Are you running ducts to the backing plates?? - blue02 13:29 6/08/2001 (1)
    - Re: Are you running ducts to the backing plates?? - 02 Maik 16:17 6/09/2001 (0)
trip meter (url) - jan 10:23 6/08/2001 (3)
- It's not that hard.... - Jerry Church '72tii 18:49 6/08/2001 (0)
- Re: trip meter - Derek Jones 13:59 6/08/2001 (0)
- Fix mine too :) glue & a Leatherman - Mark M 10:39 6/08/2001 (0)
Car won't Go - Kevin 09:05 6/08/2001 (3)
- Did you start the engine? - Dwight H. 23:10 6/08/2001 (0)
- Re: Car won't Go - DanCurtis 13:44 6/08/2001 (0)
- clutch, or shift linkage (eom) - Bill in MT 09:53 6/08/2001 (0)
Brown Greenville 2002 - K.C. 09:04 6/08/2001 (3)
- did it have a bike rack on it? What time? (nt) - chris 09:24 6/08/2001 (2)
  - Re: did it have a bike rack on it? What time? - K.C. 09:39 6/08/2001 (1)
    - Re: did it have a bike rack on it? What time? - chris 09:44 6/08/2001 (0)
Carol Shelby Classics @ VIR this weekend - K.C.K. 08:25 6/08/2001 (1)
- Re: Carol Shelby Classics @ VIR this weekend - gregL. 21:12 6/11/2001 (0)
2002 to 1600 swap--suggestions for checklist? - Balto Tim 07:52 6/08/2001 (7)
- The 1600 clutch mechanism will work for 2002 - Jerry Church '72tii 14:43 6/08/2001 (2)
  - Re: The 1600 clutch mechanism will work for 2002 - Balto Tim 22:10 6/08/2001 (1)
    - Re: The 1600 clutch mechanism will work for 2002 - Jerry '72 tii 00:44 6/10/2001 (0)
- Welcome aboard Tim! - Paul (at Maximill..) more... 10:48 6/08/2001 (1)
  - Re: Welcome aboard Tim! - Balto Tim 22:13 6/08/2001 (0)
- Tim I'm in Balto too/Email me if ya need a hand/mo - MartyR 09:31 6/08/2001 (1)
  - Re: Tim I'm in Balto too/Email me if ya need a han - Balto Tim 22:08 6/08/2001 (0)
wheels for BMW 2002 turbo - Egil Andresen 03:43 6/08/2001 (2)
- Re: wheels for BMW 2002 turbo - Lee 07:23 6/08/2001 (0)
- if it were me.. (url) - canada matt 07:15 6/08/2001 (0)
wheels for BMW 2002 turbo - Egil Andresen 03:42 6/08/2001 (0)
Does anyone know......?? - Reckless 03:15 6/08/2001 (3)
- Re: Does anyone know......?? - Shen 73-tii 19:51 6/08/2001 (0)
- Got mine from Ireland Engineering - MikeG 09:59 6/08/2001 (0)
- Try Maximillians. 800-950-2002 - David Schnabel 09:00 6/08/2001 (0)
I'm selling complete automatic tranny and componen - Derek Jones 02:24 6/08/2001 (0)
Plug Wires (url) - Chuck J 00:23 6/08/2001 (2)
- Re: Plug Wires - Kevin 02:37 6/10/2001 (0)
- Thanks -- any real world downside to 7mm wires? (nt) - Chris R '74 tii 09:35 6/08/2001 (0)
Help me find twisties near SLO! - Cameron A. 00:19 6/08/2001 (4)
- Try these....... - Frank 10:53 6/08/2001 (1)
  - Is See Canyon still dirt? Was in 1980 - Jerry Church '72tii 16:25 6/08/2001 (0)
- Re: Help me find twisties near SLO! - '02drew 10:18 6/08/2001 (0)
- try Rob Torres @ TIIGUY@fix.net (nt) - Miguel 02:48 6/08/2001 (0)
blowing head gasket - Brian 00:17 6/08/2001 (5)
- uno more thingo... - markeest 02:25 6/09/2001 (0)
- Re: blowing head gasket - Matt S 12:35 6/08/2001 (0)
- Re: blowing head gasket - Paul 12:33 6/08/2001 (0)
- Just a Guess - Mitch McCloskey 09:48 6/08/2001 (0)
- Re: blowing head gasket - Dwight Chew 01:39 6/08/2001 (0)
An exhausting experiment... - Stock mufflers rule! very long Tkent02 23:49 6/07/2001 (8)
- Stock exhaust doesn't set of car alarms or send - critters runnin' nuff said EOM 15:56 6/08/2001 (0)
- I'm a believer already! - Paul (at Maximill..) eom 10:51 6/08/2001 (0)
- Re: Stock systems - Mitch McCloskey 09:26 6/08/2001 (0)
- Thanks, I'll stick with twin resonator custom. - Dave, 08:55 6/08/2001 (0)
- Re: An exhausting experiment... - pmm 00:09 6/08/2001 (3)
  - Absolutely!! This is a stock engine, 32/36 (nt) - Non-tii Tkent02 00:13 6/08/2001 (2)
    - Stock eng optimized to stock exhaust... - pmm 00:52 6/08/2001 (1)
      - Those guys are good! (nt) - Tkent02 00:55 6/08/2001 (0)
An exhausting experiment... - Stock mufflers rule! very long Tkent02 23:49 6/07/2001 (1)
- Oops! The numbers all slid over - when I posted it! Tkent02 00:11 6/08/2001 (0)
Seatbelt bolt size - william 23:48 6/07/2001 (3)
- Re: Seatbelt bolt size - Bill in MT 17:30 6/08/2001 (0)
- Important Bolt INFO!!! - Paul (at Maximill..) more... 17:22 6/08/2001 (0)
- 17mm head bolt size-my 76 02 - Reg 13:13 6/08/2001 (0)
'02 history in Globe & Mail - Malcolm 23:26 6/07/2001 (2)
- Link to online version (url) - ... 00:17 6/08/2001 (0)
- somebody scan it and post it too. nt - trent tilton -7one 23:34 6/07/2001 (0)
BREAKAGE of polaris 500 magnum pipe - james gwaltney 23:04 6/07/2001 (0)
New Pics (url) (pic) - Paul 22:14 6/07/2001 (8)
- Terrific inspiration for my Turbo project (more) - Hugo 15:37 6/08/2001 (0)
- Paul, gotta question for ya, could you email me? - Chris Brooks 11:59 6/08/2001 (0)
- nice paul... I wish I had the skill... - dougiefresh 01:01 6/08/2001 (1)
  - Same here!!! - Dave, 08:57 6/08/2001 (0)