The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Just click on save as Kamal. I have IE, it works. (archive)
[ Follow Ups ] [ 3-series (E46) Message Board ] [ Msg. Board FAQ ]
Posted by Ran on March 03, 1999 at 14:28:04:

In Reply to: How do I save this GREAT POST with pictures?? posted by Kamal on March 03, 1999 at 14:25:16:

: And are you guys doing this to fix rattles or replace speakers? Or both?

: : Thank you to anonymous for the pictures and instructions:

: :


: : Unclip wooden finisher (1) with special tool 00 9 321.
: : If necessary, replace faulty clips (1) in wooden finisher (2).

: : Driver's side: Using two screwdrivers, lever out mirror switch (2) towards top of control knob (1).
: : Disconnect plug connection (1) and remove mirror switch (2).

: : Passenger side: Using a small screwdriver, carefully lever out trim (1) at points (2).
: : Remove screws (1 and 2). Remove inserts (3) and release underlying screws. When reinstalling, screw (1) is longer than the others.

: : Unclip clips (1) in door trim panel with special tool 00 9 317 (trim panel wedge).
: : Carefully unclip door trim panel (1) at top with special tool 00 9 317 (trim panel wedge). Feed door trim panel (1) out of unlocking knob (2).

: : Unhook cable for unlocking lever: Tighten unlocking lever (1); lift out lock (2); remove cable (3) towards rear/top. To reinstall, press unlocking lever (1) fully against door trim panel.
: : Version with additional speaker: if necessary, disconnect plug connection (1) on additional speaker (2).

: : Feed out wires (1) from opening (2). Disconnect plug connections (3) and (4) and remove door trim panel.
: : Installation: Clips (1) are longer than the remaining clips. If necessary, replace damaged clips.
After assembling the door trim panel proceed as follows:
: :
    Open door window
    : : Lock with vehicle key
    : : Check for ease-of-movement on retaining button linkage
    : : If necessary, align linkages

: : --Alan



Follow Ups:


[ Follow Ups ] [ 3-series (E46) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2013 Jump Internet Inc. All rights reserved.