|
Posted by JimL on February 10, 1999 at 00:04:01:
In the name of science :-), I took apart the premium DSP/EQ/AMP in my E39, and learned alot about what it is and isn't.
At the heart of the system are two Motorola 56004 DSPs. These will each handle 6 separate audio channels, so the pair handle 12. 6 up front: tweet, mid, bass. 4 in back: tweet, rear deck. 2 sub channels.
The 56004's have two digital inputs. One is from the Alpine head unit, converted to digital through an Analog Devices 16-bit stereo ADC... the AD1877. The second digital input is directly from the CD-changer.
The 56004's handle the 7-band EQ, variable "loudness", volume, balance, fade, and crossover functions. Unfortunately, the crossover function is hardwired into the program, so you can't adjust this. For example, if you wanted to go to a 2-way setup up front, you're stuck with the x-over adjusted for the factory 3-way setup. 12 separate digital streams are generated, which feed into 6 stereo 18-bit DACs (AD1859).
These low level signals are then fed into 12 "power" amps. These are actually a joke. The mids and bass are amplified by a Class-B/H chip made by Philips: TDA1560Q. This part is rated 40W into a 8-ohm load at 10% THD. It's half that at 1% THD. Below 100Hz, the power rating drops precipitously.
I experimented by tapping the output of the subwoofer DAC and feeding this low level signal directly to an external amp. The result was great. Very clean. You avoid the distortion of the TDA1560Q this way. However, you need to be comfortable with soldering small wires onto the PC board. Worth it if you want a really clean result.
It was a fun and educational project. Disappointing to find that the $1000 option had less than $100 worth of parts. It could have been so much more... sigh.
/Jim
© 1997 -
2010
Jump Internet Inc. All rights reserved.
