The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: Help with CD chgr (w/NAV+DSP) Jim Cash/John Fe (archive)

[ Follow Ups ] [ 5-series (E39) Message Board ] [ Msg. Board FAQ ]

Posted by Jim Cash on August 10, 1999 at 14:01:17:

In Reply to: Help with CD chgr (w/NAV+DSP) Jim Cash/John Felker posted by Trevor on August 10, 1999 at 00:34:02:

: Hello Jim/John...anybody :)


Not sure I will be much help - I do not have the Nav system - actually the installation is different depending on whether you have the OBM or not (In some markets you can get the OBM witout the navigation)

Mine (DSP but OBM) has 3 cables.

- thin round cable to circular plug (this goes to the DSP amplifier and I think it is a coax for audio output and maybe some control data)

- 3 wires (tape wrapped) - plugs into middle connector. This is probably the power leads

- thick round cable (5 wires) plugs into the last connector. This is listed as the "connection cable - CD Changer". There are 2 versions listed depending on whether you have the OBM or not. The one for the OBM is much shorter (about 9 inches), while the one for then non OBM installation is about 10.5 ft - so I assume it goes all the way to the radio in the dash. With the OBM the radio is mounted at the rear near the CD - so that would explain the difference.

Sooo - all I can tell you is that it would "appear" that there are 3 cables - you will have to refer to someone that has the exact same installation as you.


Cheers

Jim Cash




Follow Ups:



[ Follow Ups ] [ 5-series (E39) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2016 Jump Internet Inc. All rights reserved.