In Reply to: Non-Nav CD Changer Installation instruction posted by bubba on December 08, 1999 at 11:42:15:
This is in the archives.
Large bracket attaches to the body with 2 nylon nuts next to the amp (screw sticks up from body). One screw that attaches to the body towards the middle of the car, a plastic insert goes into the square hole which the one screw screws into. There are other holes on the lower bracket but are not used. Attach this first.
Attach the smaller bracket to the CD unit with the 4 small screws. Make sure that you change the CD position to VERTICLE on the side of the CD unit!
Plug in the controller cable first, then the power cable. Attach the CD unit with bracket to the large bracket mounted near the amp with the 3 bolts.