In Reply to: Dan , Since your car is the R & D...(more) posted by Alex Argyros on January 28, 2000 at 15:41:42:
: ...vehicle (automatic), I know that you will keep the board updated on Dinan products as soon as
: it is permissible. I'll make it a point not to call Dinan. I have never mentioned your name to them and I would never do that. I'll "bug" you once in a while, but I don't want to be too much of a pain for you either. I know that sometimes I could be "pushy".
: A million thanks for all your Dinan help (past, present & future).
: : : : Steve Dinan called me today to ask if he could use my car for two days next week. It's a suspension piece (not the strut tower brace). I'll take that opportunity to talk with him about the exhaust, supercharger, strut tower brace, and other items they're working on. I know Steve's 540i-6 is supercharged already. That thing flies like a bat out of hell. They're currently in the final stages of software and minor hardware testing. People, this is what makes Dinan so good. Steve's car has been supercharged for about 1.5 months now, and it's still not out because of all the testing and calibrating they're doing to it. They are basically ensuring that you get the maximum HP with minimum risk. You don't make a name in this business for nothing. Enough said, Steve's the man.
: : : : -Dan B
: : : : -=Dinan R&D Car=-
: : : : www.e39garage.com
: : : : P.S. Will update site with some goodies soon...
: : : : : : I hope this does not offend Dan. He's
: : : : : : up there also.
: : : : : : Alex
: : : : : : : Kevin:
: : : : : : : Sorry I missed your post cause I took a little vacation up north.
: : : : : : : I had my Dinan stage III suspension for some months now and I'm quite satisfied with its ride and very satisfied with the handling and joy it brings.
: : : : : : : I did not have any major problem with the Dinan suspension nor the engine mods, however, there is a slight problem with the suspension and it happened some time ago. The case was solved and I did post the entire situation on this board. I'll post again for your reference.
: : : : : : : Let me know if you have further questions.
: : : : : : : JIMMY
: : : : : : : 98 540i
: : : : : : : 99 e430 etc.
: : : : : : : ------------------------------------------------------
: : : : : : : Here is are the "DINAN Suspension issue" which I posted it a while ago:
: : : : : : : I recently have a slight problem with my suspension but the situation has been solved today. I have Dinan's stage III suspension and since the installation (It's been 6 months now) I have no problem with it and it works like magic in terms of handling. I recently have my Dinan representative tuned my front Dinan-Tuned Koni shock firmer, somehow after he tuned the car (it was about week ago at the Dinan meeting at Long Beach BMW) my front tire has been touching the front fender whenever I make a really hard turn. I first thought it was the doing of the BMW DSC (Dynamic Stability Control or DBC(Dynamic Brake Control), but it wasn't.
: : : : : : : This situation is IMPOSSIBLE because according to Dinan, their Stage III suspension (it suppose to be the most Efficient, Best Handling, Most Expensive Suspension for E39 540i in the market which includes Adjustable Shocks & Rear Sway Bar, Springs and front camber plates). There's NO WAY for my tire to rub my front fender.
: : : : : : : I started to wonder for couple days and when I ask around about the situation, here are the responds:
: : : : : : : 1. Dinan Authorized Dealer told me that front rims and tires are too big, that is why it is scratching my front bumper. I have 245/35/19 P-Zero front & 275/30/19 rear, I have to fold my rear fender due to the oversized tires.
: : : : : : : 2. My local motorsports shop told me that Dinan did not make good suspenstion because they did not make the front sway bar, the reason my tires are touching my fender is because I need a set of good front sway bars, so they recommended 2 A.C. sway bars for $1400.00 ($800 Parts + $600 Labor), the reason the labor are being so expensive is because the front sway bar acquire more engine work, they suggested the change immediately. I refused because I believe that sway bar is not the issue. And on top of that Dinan's suspension is definitely better than their A.C. or Racing Dynamic suspensions.
: : : : : : : The result: It appears to be that THEY ARE ALL WRONG! After some serious thinking, I figured that when my Dinan authorized dealer first installed the Dinan stage III, the tire never rubs. The front tires started to rub the fender after that Dinan representative's shock adjustment in the Dinan meeting. Maybe the Dinan representative had tuned the shock to SOFT instead of FIRM. I then open my hood today and check the front shocks, it appears to be very soft as I turned the knob. I then tuned my shocks to the FIRMIST point. And Guess What? The rubbing is GONE and my car now handles better than ever, the best thing is that even though I turned the shocks to the firmest point, the ride still remains pretty much the usual. Now I realized what and where the problem is.
: : : : : : : THE VERDICT:
: : : : : : : Since my tires are too big, there's a better chance for the front tires to touch the fender when making a hard turn because of the corning pressure, which will make one end of the car lower when performing a hard corning maneuver. THUS THE FIRMER THE SUSPENSION PREVENT THE TIRE RUBBING AGAINST THE FENDERS!
: : : : : : : - Dinan representative turned the shock to SOFT instead of FIRM, I should NOT have my Dinan representive did this because I should have known that Dinan representative know more Marketing stuff more than the car itself! By the way, I still no not understand how my Dinan authorized dealer came up with the Tire-Is-Too-Big-So-That-It-Is-Rubbing-The-Fender thing.......?? ! !
: : : : : : : - My local Motorsports Shops is TOTALLLY WORNG, because they want my money ($$ Kah - Ching !! $$)!! That is why they are pushing me to do the useless A.C. sway bar job.
: : : : : : :