Good idea. Make sure that people you talk to know (archive)

Lots of options out there. But also a lot of possible problems if you do it wrong. So.. i want to make sure that i get a lot of different opinions before i start modifying the engine.
take care.

Follow Ups:

I was thinking Racing Dynamics.. but (more) Marcus-San Diego, CA� 21:42 7/08/2001 (18)
- Actually, if you want to do it right and do not want to listen to bozos ... Stepan 21:55 7/08/2001 (12)
  - to put a euro e36 motor in an e39 is not as easy Brad Otoupalik (evosport) 22:13 7/08/2001 (11)
    - Really? (m) Stepan 23:09 7/08/2001 (10)
      - on cams ... Brad Otoupalik (evosport) 23:26 7/08/2001 (8)
        
        Got before/after independend duno pulls? Stepan 23:29 7/08/2001 (7)
        
        the last run we saw 259.9 rear wheel hp-last week Brad Otoupalik (evosport) 23:39 7/08/2001 (0)
        
        yes, see will turner's web site for our dyno Brad Otoupalik (evosport) 23:38 7/08/2001 (5)
        
        Wait a second. TMS lists it as SCHRICK cams. Kit is listed for $2365. WTF? Stepan 23:56 7/08/2001 (2)
        
        I know ... Brad Otoupalik (evosport) 23:59 7/08/2001 (1)
        
        I see. Blanks do not have lobes grinded, right? Stepan 00:03 7/09/2001 (0)
        
        Now you are talking! 40 rwhp gain. Not bad, not ba d at all! Stepan 23:47 7/08/2001 (1)
        
        the kit is AWESOME! ... BUT ... Brad Otoupalik (evosport) 23:57 7/08/2001 (0)
      - it is not a direct bolt in in an e36 ... Brad Otoupalik (evosport) 23:24 7/08/2001 (0)
- There are none in CA ... I guess you are stuck with 2.8. Stepan 21:44 7/08/2001 (4)
  - there are plenty of options in CA step - c'mon! Brad Otoupalik (evosport) 22:11 7/08/2001 (3)
    - Like what? Give me a tuner that brings 2.8 over Stepan 23:10 7/08/2001 (2)
      - we have done 260 rear wheel hp on 3.0 for less Brad Otoupalik (evosport) 23:27 7/08/2001 (1)
        
        Yeah! DanB has 383 rwhp dynopull too. Stepan 23:31 7/08/2001 (0)

[ Follow Ups ] [ 5-series (E39) Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.