Re: There are 3 Options for 1998 750's (archive)

You have 3 options for side windows in a US Spec 750 for 1998.
1 - "Green" This is a normal, single pane window.
2 - "Insulated Double Glazing" This has a black frame around the edge of the windw, and is about 8mm thick.
3 - "Burglar Proof Glazing" This is a normal, single pane window with a special plastic coating on the inside to prevent the possible intrusion into the passenger compartment in the event of a broken window.
Let me know which window and I'll give you the correct part number.

OK, so explain this. The windows are the double pane, black border, 8mm thick WITH the protective coating inside. I know they are the break resistant because there is a sticker on the rear window itself stating so. There was a thick layer of clear poly applied to the inside of the windows. Maybe this will help, I took the numbers off of the windows. The mis-matched window has the following numbers on it; E6 43R-008327 and DOT27 M3321 AS2 . The rest of the windows on the car have the following sequence; E2 43R-005201 and DOT 36AS15AM200 . So I am not sure what to think short of ordering windows and checking the codes on the glass. Problem is, these codes probably have to do with where and when the glass was produced and may not mean anything in helping to find the correct part. The car does not have the protection package, that I am sure of. It definately has double pane windows and the thick safety coating inside. Thanks for the help so far. Does any of this help clear it up?

Follow Ups:

[ Follow Ups ] [ 7-series Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.