Finally got my new clear lenses.... (archive)

On the 2001 model, the extreme front edge has yellow. Hated it. Worked with BavAuto. Instructions are WRONG. If you decide to do it, pop the hood. On the inside groove of the fenders, you'll find two little black caps. Take them off with a pair of pliers. Now the trick... Do NOT stick a phillips screwdriver down in there and press down expecting them to come out at you. It doesn't work that way. Feel around for something metallic. It's the top of a phillips head screw. You won't be able to see it. Unscrew it upwards about 1/2". The screw itself is about 1 1/4" long. Now pull the light assembly forward. Once out change only the lense assembly, not the bulbs. Then, find/buy a scribe. Run it down through the hole and hook the plastic tube and hold it up. Put the light assembly back in place. Then tighten down the phillips screw. Done. Looks good.

Follow Ups:

Thanks, I ordered some this a.m., frnt/rear..... jmac 14:56 6/29/2001 (0)
What is the plastic tube you refer to? Bob 14:28 6/29/2001 (1)
- Re: What is the plastic tube you refer to? Big-T 14:45 6/29/2001 (0)
I had the same problem, isntructions are wrong! Big-T 13:36 6/29/2001 (0)

[ Follow Ups ] [ 7-series Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.