|
In Reply to: Are you sure that you have the DSP system ? posted by Henry on October 22, 2001 at 07:49:13:
Thanks for the response, I must be looking at a different 12 pin connector. Where exactly are the DSP connectors located and what are the pin outs for the subs and remote power?
In the DSP system, there are three connectors. They are 15, 18, and 26 pins. There is no connector with 12-pin.
However, in the standard (non-DSP) system, there is a 12-pin connector. The wiring is below :
1 Yellow/Red Left Front Woofer (-)
2 Yellow/Brown Left Front Woofer (+)
3 Blue/Red Right Front Woofer (-)
4 Blue/Brown Right Front Woofer (+)
5 Yellow/Purple Left Rear Woofer (+)
6 Yellow/Grey Left Rear Woofer (-)
7 Blue/Grey Right Rear Woofer (-)
8 Blue/Purple Right Rear Woofer (+)
9 Blank
10 Brown Ground (DO NOT USE)
11 White Remote Turn On Lead
12 Red Power (DO NOT USE)