| 5 Series (E28) Board | Post Reply | Preferences | Search | New Archives | Old Archives | Boards FAQ | Notify the Admins |
|
| Author: |
| ||||
| Subject: |
| ||||
| Message: | I am replacing the getrag 260/6 transmission in my '88 528e with a salvage yard unit. I would appreciate some insight into how I might verify the condition of the salvage unit prior to installation. I can tell you this about the salvage unit: - No metal or shavings in the unit, just a small bit of grey sludge. - Input and output shafts turn freely with only slight play. - It appears to be very clean inside and no visible damage to any gears when "inspected" through fill and drain plugs with a bright telescopic light. - I can only run the shift-shaft paralell to the transmission in three positions which are...All the way in = 1.00:1.00 input to output rotation, halfway in + neutral, and all the way out = 1.00:1.00input to output rotation. I cannot seem to turn the shift shaft to the left or right which I believe is necessary to find the other gears. Any insight or suggestions is greatly appreciated. Thank much. Tim | ||||