| M3 (E36 M3) Boards | Post Reply | Preferences | Search | New Archives | Old Archives | Boards FAQ | Notify the Admins |
|
| Author: |
| ||||
| Subject: |
| ||||
| Message: | CORRECT hoses; apparently my '99 does not match up with the dealer's ETK on the hoses. They ordered all new coolant hoses, I started the repairs then ran out of time and dropped the rest off at my local shop. They called to say some hoses were missing, and some were extra and my car did not match the OEM link someone posted below. I believe my mechanic said my heater control valve and hoses matched a 328, not an M3. Anyone else know about this? My longest heater hose was punctured and failing from the inside out. I realized that I probably pinched it a few months ago when I jacked up the engine to replace the motor mounts. It was time to replace the hoses then, but I only put in a new radiator/water pump/front hoses at the time. So, check your heater hoses and throttle body hoses. My car has about 83,000. '99 M3 Estoril/Black Moton Club Sports Powerflex f/r bushings Strongstrut strut bar UUC tranny mounts/enforcers JTD underpanel Cold air intake '99 M3 Silver/Black RIP | ||||
© 1997 -
2008
Jump Internet Inc. All rights reserved.
