Forced Induction Message Board

pcv valve on 2003 Cadillac CTS - M.A. DeShazo 2006-09-20 13:25:55 (1319 views) (1790 thread views)
- Re: pcv valve on 2003 Cadillac CTS (url) - krislou80 2010-07-30 03:51:29
- not here (url) - butlertron ©⁵⁵ 2006-10-17 00:47:28 (798 views)

Twin Turbo V12 kit coming soon - alexbmw 2007-12-31 12:48:53 (1232 views) (2257 thread views)
- Re: Twin Turbo V12 kit coming soon - zm850i 2008-01-26 15:07:07 (996 views)
  - Re: Twin Turbo V12 kit coming soon - Adrian Burton 2010-07-23 19:11:12 (10 views)
- I'm interested as I'm figuring out a way - RevHigh 2008-01-23 16:38:43 (945 views)
  - Re: I'm interested as I'm figuring out a way - Vette Spare Tire Kit 2008-11-12 08:34:46 (634 views)

ocean bush melting rise (url) (pic) - diamontina 2010-06-16 08:23:50 (27 views) (27 thread views)

2009 available public (url) (pic) - diamontina 2010-06-03 14:03:28 (35 views) (35 thread views)

How safe is supercharger on engine - rsn48 2005-05-21 22:57:45 (4791 views) (14645 thread views)
- Re: How safe is supercharger on engine - robbo08 2010-02-01 21:07:45 (244 views)
- Might as well just - mark93ic 2005-12-06 21:24:56 (1739 views)
- Re: How safe is supercharger on engine - Alex 2005-07-10 19:32:31 (2140 views)
  - The turbinator is not a supercharger - mark93ic 2005-12-06 21:32:46 (5012 views)
  - Re: How safe is supercharger on engine (nt) - Mr.Alex 2005-11-05 00:52:34 (1625 views)
  - Bad - brads2002 2005-07-30 11:49:34 (1520 views)
  - Turbinator? Uhhhhh, that's a copy of the Tornado - stuartyp 2005-07-11 12:55:00 (2268 views)
  - Anything that results in >>> - Sweeney 2005-07-10 21:48:03 (1487 views)
- OEM - Victell 2005-06-21 15:56:43 (1316 views)
  - Re: OEM - glen 2005-12-10 23:45:10 (906 views)

------ Advertisement. Support us by joining the Roadfly Inner Circle to optionally hide this banner ad. ------

headgasket s38 turbo (3.6 / 3.8 e34 m5) - joeri 2005-02-06 14:23:49 (2101 views) (4780 thread views)
- Re: headgasket s38 turbo (3.6 / 3.8 e34 m5) - evan 2009-07-01 17:11:53 (470 views)
- TCD has MLS gaskets - Jeremy 2006-03-12 20:54:34 (1078 views)
- M1 cutting ring head gasket, 94mm bore>>> - Turbo'd&Nitro'd 635csi euro 2005-02-12 09:11:44 (1358 views)
  - Re: M1 cutting ring head gasket, 94mm bore>>> - Peter_quan 2006-03-09 21:01:05 (1142 views)
    - Re: M1 cutting ring head gasket, 94mm bore>>> - Joeri 2007-01-03 07:46:49 (941 views)

E24 Dinan turbo M6 anybody??? - pumpedTSI 2007-06-19 19:58:26 (1603 views) (2527 thread views)
- Im interested - Ore' 2008-12-15 18:21:53 (630 views)
- Re: E24 Dinan turbo M6 anybody??? - RogerL6 2008-06-14 00:43:15 (987 views)

Turbo Heat Shields/Insulation inquiry... - Ore' 2008-12-15 18:19:35 (551 views) (558 thread views)

common wastegates - Dave 745i 2004-10-13 17:47:54 (1772 views) (17309 thread views)
- Re: common wastegates - paule 2004-11-10 23:34:00 (1341 views)
  - The Audi 5000T Wastegate... - Brad 2004-11-26 20:41:09 (2253 views)
    - Re: The Audi 5000T Wastegate... - your leader 2006-06-09 13:02:12 (1060 views)
      - Very funny... - motormeister 2007-08-15 22:49:16 (982 views)
    - Re: KKK Turbo K26... - Glen Rankine 2005-02-17 06:52:43 (4123 views)
      - Re: KKK Turbo K27... - mike21 2008-12-13 13:13:17 (875 views)
      - Re: KKK Turbo K26... - BITCHES 2005-11-14 16:57:57 (1750 views)
      - Re: KKK Turbo K26... - TERRY ALLISON 2005-05-18 21:48:26 (6634 views)
        kkk turbo - Ben Madsen 2007-08-11 14:05:23 (1422 views)
- check with Jon 86 745, on the 745 board, >> - marc79euro645 2004-10-13 21:03:48 (1286 views)
  - oh yeah, here's the link (nt) (url) - marc79euro645 2004-10-13 21:04:47 (1394 views)

------ Advertisement. Support us by joining the Roadfly Inner Circle to optionally hide this banner ad. ------

Garrett VNT Turbo - CV Stancampiano['05 MCS,'72 tii,'91M5 2008-09-21 11:57:16 (1213 views) (1197 thread views)

KKK K27 Turbo kit in E34 535i... suggestions? - Blitzlinger 2005-11-10 14:31:25 (7356 views) (17893 thread views)
- Re: KKK K27 Turbo kit in E34 535i... suggestions? - RaM 2008-07-15 16:59:45 (1673 views)
- Re: KKK K27 Turbo kit in E34 535i... suggestions? - papajetta 2006-03-21 10:53:54 (2588 views)
- Full stand alone ECU's are geeting cheap>>> (pic) - Turbo'd&Nitro'd 635csi euro 2005-11-12 01:34:12 (5440 views)
  - nice work! (nt) - RevHigh 2006-08-04 17:36:37 (1229 views)
  - That is probably the sexiest thing without legs - Chad 2005-11-19 13:15:08 (1483 views)
  - WOW! looks great (nt) - gunter 2005-11-17 19:14:12 (1149 views)
  - Good grief! That engine of yours is scary! Also... - Blitzlinger 2005-11-12 18:48:40 (1474 views)
    - That's Zane Coker's e12 engine (nt) - Velocewest 2006-04-21 16:34:04 (1315 views)
      - Doh! Just realized the connection... (nt) - Velocewest 2006-04-21 19:41:44 (1178 views)

Newbie needs advice - CrowBar 2008-06-02 21:05:56 (887 views) (887 thread views)

WHat up? - R.Burgundy 2008-02-26 09:38:47 (806 views) (800 thread views)

976HP BMW CUSTOM M 330ci!!! (url) - imurfavbuddy 2008-01-28 22:07:14 (1182 views) (1172 thread views)

M42 Supercharger for 318is? - Van 2007-03-19 05:03:07 (2907 views) (3807 thread views)
- Re: M42 Supercharger for 318is? - asd 2007-11-03 17:20:42 (1388 views)

copper turbo head gasket....for M20 (pic) - Patp 2006-04-30 12:43:00 (1676 views) (4392 thread views)
- Re: copper turbo head gasket....for M20 - Brett 2007-10-24 20:25:59 (1119 views)
- I think i do Pat - brads2002 2006-09-13 18:14:59 (947 views)
- Hey Pat! WERD! - RevHigh 2006-08-04 17:27:31 (832 views)
  - Re: Hey Pat! WERD! - Pat P 2006-08-05 13:29:14 (810 views)
    - email sent. thanks (nt) - RevHigh 2006-08-08 06:57:44 (746 views)
      - me no get it... (nt) - Pat P 2006-08-21 17:16:14 (650 views)

Vortech rebuild alternatives? - DanB 2007-06-26 23:31:22 (1244 views) (2323 thread views)
- buy the rebuild parts kit yourself and DIY. (nt) - RevHigh 2007-07-03 10:22:08 (882 views)
  - F that I don't have a press, still looking. (nt) - DanB 2007-10-21 13:59:23 (920 views)

BMW EFI computer hacks? - Joe 2007-08-23 08:02:18 (1160 views) (1980 thread views)
- Scott Jackson inspired a thought. - Joe B 2007-08-24 14:54:26 (759 views)
  - Re: Scott Jackson inspired a thought. - Scott Jackson... the inspiration :-) 2007-09-09 16:35:19 (758 views)

e36 M3 Powerdyne Squeak (url) - DownbeatDave 2007-09-08 18:52:08 (790 views) (1140 thread views)
- Re: e36 M3 Powerdyne Squeak - DownbeatDave 2007-09-09 13:41:14 (651 views)

All new video and photo upload section (url) (pic) - Laura B. ©⁶² 2007-08-03 17:42:31 (711 views) (710 thread views)

VF Engineering Supercharger Install - bkz31998 2007-07-29 10:04:03 (888 views) (883 thread views)

Callaway M10 turbo specs - 2042 2007-07-26 22:23:50 (972 views) (960 thread views)

switch to open loop / ESC1 question - doublesix 2007-07-06 18:33:58 (860 views) (1559 thread views)
- update - doublesix 2007-07-07 03:40:16 (704 views)
  - update again...solved - doublesix 2007-07-19 13:58:02 (678 views)

MAF's, RRFPR's, Signal processors? HELP!!!!!!!! - Going grey rapidly here!!! 2007-07-12 08:27:53 (716 views) (1458 thread views)
- Re: MAF's, RRFPR's, Signal processors? HELP!!!!!!! (nt) - v8, v12, r6.. which engine ??? 2007-07-13 04:59:07 (751 views)
  - V12 M70S56 (nt) - Gerry, UKCSi 2007-07-15 09:10:57 (702 views)

VF-Engineering SC Noise - z3elleng 2007-05-29 08:37:52 (1129 views) (2256 thread views)
- Re: VF-Engineering SC Noise - BKZ31998 2007-07-13 14:04:29 (889 views)
- Re: VF-Engineering SC Noise - z3elleng 2007-05-30 07:02:48 (996 views)

what welders for exhausts and manifolds? - Gary 327i turbo 2004-05-02 19:23:43 (1203 views) (7873 thread views)
- Re: what welders for exhausts and manifolds? - 89325iturbo 2004-05-03 18:08:22 (943 views)
- If you're just learning to weld I would suggest >> - Sweeney 635 Twin Turbo 2004-05-03 08:08:31 (1234 views)
  - Re: If you're just learning to weld I would suggest >> - Gary 327i turbo 2004-05-03 18:03:46 (1646 views)
    - Re: If you're just learning to weld I would suggest >> (pic) - dhs 2004-05-06 10:10:29 (1125 views)
      - Re: If you're just learning to weld I would suggest >> - Gary 327i turbo 2004-05-07 04:13:42 (948 views)
    - I have a MillerMatic 135 MIG welder which >>> - Sweeney 635 Twin Turbo 2004-05-03 19:48:48 (3445 views)

NE1 with info on turbo'ing an M10 motor.... - RevHigh 2006-08-04 17:32:27 (1288 views) (5290 thread views)
- Re: What to do about exhaust manifold? - C. V. Stancampiano 72 tii touring, 91 M5 2007-07-01 03:37:08 (766 views)
- Holy Crap!!! Look at these numbers... (pic) - John in DC ©⁸⁶ 2006-09-15 10:08:56 (1327 views)
  - I have carbs though. A bit different and if I go - RevHigh 2006-11-16 11:44:06 (858 views)
- Re: NE1 with info on turbo'ing an M10 motor.... (pic) - #73 2006-09-12 20:43:27 (1184 views)
  - Cool. I'm looking for hardware(exh) to do this so - RevHigh 2006-11-16 11:42:50 (832 views)
- call me dude been waiting on you..... (nt) - Patp 2006-08-27 17:57:27 (974 views)
- Didn't the M10 run massive boost back then? - John in DC ©⁸⁶ 2006-08-27 02:14:19 (1113 views)
  - Re: Didn't the M10 run massive boost back then? (url) - VWBMW 2006-08-30 03:15:27 (1053 views)
    - Yes, and that was with nearly a stock block. - PaulR ©⁶⁸ 2006-09-15 14:23:30 (1000 views)

Sourcing for turbo oil return hose - JT 2007-05-31 10:25:19 (1138 views) (1909 thread views)
- JT, I use a local hydraulic hose shop>> - douginky79turbo 2007-06-13 11:03:35 (710 views)
  - Got about 6" of spare 5/8" ID...? (nt) - JT 2007-06-19 21:45:14 (680 views)

E34 540iA turbo.... on the cheap? - Scott Jackson 2007-04-04 16:34:41 (1074 views) (2679 thread views)
- to clarify a bit... - Scott Jackson 2007-04-04 16:40:20 (965 views)
  - Don't know much about turbo but if you could - Peter/ E24 2007-05-18 01:16:20 (864 views)
    - Re: Don't know much about turbo but if you could - Scott Jackson 2007-05-30 04:54:24 (852 views)

car overheating...intercooler radiator which is - Hamish 2007-04-09 22:39:01 (963 views) (2093 thread views)
- Intercooler radiator should be independent >> - douginky79turbo 2007-05-18 13:16:49 (844 views)
- As you said! Any pics so we can see better ? (nt) - Peter/ E24 2007-05-18 01:12:35 (883 views)

VF Engineering Supercharger - bkz31998 2007-05-09 20:26:02 (1115 views) (1114 thread views)

E31 TT article........ - pumpedTSI 2007-04-28 19:00:19 (979 views) (977 thread views)

AA turbo - oridgeback 2007-04-02 17:05:41 (912 views) (1544 thread views)
- Re: AA turbo - oridgeback 2007-04-02 21:38:28 (925 views)

I found a M30 euro/turbo motor I am considering> - Stoner 2007-01-25 22:04:28 (913 views) (1784 thread views)
- Actually it's a m106 anyone done this swap that - Stoner 2007-01-26 21:54:11 (832 views)
  - Re: Actually it's a m106 anyone done this swap that - ESAD 2007-03-03 11:40:20 (731 views)

98 M3 supercharger-What other mods? - pauljanke 2007-02-14 12:46:56 (727 views) (718 thread views)

Faster 2007 335i - Matt 2006-11-04 09:28:51 (896 views) (2642 thread views)
- Re: Faster 2007 335i - JT 2007-01-26 08:07:59 (765 views)
  - Re: Faster 2007 335i - pumpedTSI 2007-01-28 18:23:03 (751 views)
    - Going to the Gathering of 8's? It'll be there... - JT 2007-01-30 20:27:51 (798 views)
      - Never mind. Saw your entry. See you there! (nt) - JT 2007-01-30 20:32:48 (744 views)

Re: Bucking under boost? - cole 2007-01-25 19:06:28 (1158 views) (1155 thread views)

Bucking under boost? - cole 2006-06-30 20:11:59 (1107 views) (5191 thread views)
- Re: Bucking under boost? - Jamie 2006-12-12 17:52:26 (808 views)
- Re: Bucking under boost? - JT 2006-09-19 10:44:44 (811 views)
- Re: Bucking under boost? - cole 2006-08-18 21:03:30 (815 views)
  - Re: Bucking under boost? - cole 2007-01-25 17:54:52 (747 views)
  - Re: Bucking under boost? (url) (pic) - Brian 2007-01-08 01:26:58 (713 views)
- Re: Bucking under boost? - VWBMW 2006-07-02 17:20:12 (883 views)
  - Re: Bucking under boost? - cole 2006-07-03 16:11:28 (880 views)
    - just curious where are you located? (nt) - whoadude 2006-07-03 18:32:41 (818 views)
      - Re: just curious where are you located? - cole 2006-07-03 19:57:37 (849 views)
        Re: just curious where are you located? - m3boost 2006-07-05 20:12:04 (840 views)
        Re: just curious where are you located? - cole 2006-07-08 14:48:04 (834 views)

how do you put a boost gauge on a SC car - bimmer2.8 2006-11-15 11:55:03 (1006 views) (3217 thread views)
- I just finished a AA SC install & would like... - titantodd 2007-01-20 20:28:33 (758 views)
  - Re: I just finished a AA SC install & would like... - pumpedTSI 2007-01-21 20:03:11 (744 views)
    - do you know where i can get braided line - bimmer2.8 2007-01-22 01:01:54 (725 views)
- Re: how do you put a boost gauge on a SC car - pumpedTSI 2006-11-15 21:39:50 (846 views)
- i believe the kit has a blow off valve (nt) - bimmer2.8 2006-11-15 11:58:58 (787 views)

E30 chassis strength??? - G57YLE 2007-01-16 18:01:31 (754 views) (738 thread views)

Supercharger, Twin Turbo, or Motor ups for 750il - BlackV12 2005-12-23 10:05:36 (3384 views) (8597 thread views)
- Re: Supercharger, Twin Turbo, or Motor ups for 750il - ScottJackson 2006-10-27 04:20:54 (1630 views)
  - Nevamind, just saw the date of orig. post. NM (nt) - ScottJackson 2006-10-27 04:25:12 (973 views)
- You can get the engine displacement up to a 6L (pic) - Faisal in Laurel, MD 2005-12-30 10:38:40 (1885 views)
- Re: Supercharger, Twin Turbo, or Motor ups for 750il (url) - Morgan 2005-12-28 17:38:21 (1569 views)
- Re: Supercharger, Twin Turbo, or Motor ups for 750il - Morgan 2005-12-28 15:35:45 (1413 views)
  - Re: Supercharger, Twin Turbo, or Motor ups for 750il (url) - Richard 2006-10-19 01:33:31 (1217 views)
    - Re: Supercharger, Twin Turbo, or Motor ups for 750 (url) (pic) - Brian 2007-01-08 01:28:54 (1074 views)

Charlie's Redneck activities in a Shelby GT500 (url) - Laura B. ©¹⁶⁰ 2006-12-13 11:26:09 (858 views) (853 thread views)

Can you get more than 8psi from Dinan S/C Safely? (url) - Scott 2006-08-19 19:06:22 (913 views) (1836 thread views)
- There's nothing wrong with the power - Peripatetic Nomad 2006-12-10 19:52:12 (788 views)
- I think so - 540sport ©⁷⁹ 2006-08-24 20:39:32 (830 views)

Bigger turbo?? (url) (pic) - stuartyp 2006-07-05 17:06:39 (1192 views) (2015 thread views)
- Yep that is my buddies from TPS>>> - Turbo'd&Nitro'd 635csi euro 2006-07-27 01:46:25 (842 views)
  - Re: Yep that is my buddies from TPS>>> - Allan D ©⁴⁹ 2006-10-12 12:01:00 (731 views)

Need 745i Turbo Performance help.... - Richard 2006-09-12 17:44:09 (954 views) (2030 thread views)
- Post the question to these guys here... (url) - JT 2006-09-19 10:24:45 (768 views)
  - Also check with "Vern 745I" on E24 or b!mmerboard (nt) - Peter/E24 2006-09-19 19:12:32 (699 views)
- Call Todd at TCD (nt) (url) - Mike - 86 Landshark 2006-09-18 09:17:02 (688 views)

Jim Conforti - Alex Anduze 2006-08-29 18:26:12 (918 views) (1495 thread views)
- Try looking up Bonneville Motor Works... (nt) - JT 2006-09-19 10:33:48 (870 views)

What Happened to the V12 Roadster Project . . . - Kenneth 1948 2006-09-14 22:17:03 (687 views) (678 thread views)

Does anyone know of an exhaust shop with mandrel.. - Chad, N.C. 2006-04-16 23:51:46 (899 views) (1917 thread views)
- Re: Does anyone know of an exhaust shop with mandrel.. - pumpedTSI 2006-04-28 15:09:45 (841 views)
  - Thanks alot! I never thought of checking with them (nt) - Chad, N.C. 2006-05-01 21:29:39 (731 views)
- No one? (nt) - Chad, N.C. 2006-04-27 11:47:58 (710 views)

Supercharge an e28 - soco 2006-08-01 15:39:08 (892 views) (1674 thread views)
- Re: Supercharge an e28 - Mike - 86 Landshark 2006-08-08 11:16:25 (852 views)
- I'm pretty sure you are on your own on that one. (nt) - Mark 88 M5 2006-08-03 14:12:22 (765 views)

Alive and kicking......... (pic) - Pat P 2006-04-09 14:25:48 (1479 views) (2653 thread views)
- oh hell yeah! (nt) - RevHigh 2006-08-04 17:28:55 (715 views)
- Glad your back buddy. That m3 is sick! (nt) - brads2002 2006-04-10 20:14:10 (772 views)
- Nice rides! (nt) - titantodd 2006-04-09 18:31:23 (863 views)

anyone ever supercharge an e28 m30? (nt) - Beatere28 2006-07-30 21:12:36 (717 views) (2134 thread views)
- Re: anyone ever supercharge an e28 m30? - Mike - 86 Landshark 2006-07-31 11:38:40 (903 views)
  - Re: anyone ever supercharge an e28 m30? - Beatere28 2006-07-31 20:10:20 (851 views)
    - Re: anyone ever supercharge an e28 m30? - hamsamich 2006-08-01 11:18:01 (871 views)

DIY stand point, what is easier? - Michael C. Hsu 2006-04-12 13:40:29 (1141 views) (3409 thread views)
- Your Computer is Not Safe! (url) - Gringo2006 2006-07-31 10:41:19 (787 views)
- Get the Most from Your PC (url) - VperedYo 2006-06-13 17:42:13 (779 views)
- (mod-o-matic zapped) (url) - (mod-o-matic zapped) 2006-06-01 08:04:41 (739 views)
- Best thing next to popcorn!! (url) - Striptizersha 2006-05-27 04:04:31 (789 views)
- Best things next to Coke! (url) - YobnisObZemlu 2006-05-14 10:08:57 (847 views)
- Best thing next to popcorn! (url) - Piannerionist0 2006-05-08 21:20:54 (837 views)

CAI Needed - theguy357 2006-07-29 19:02:14 (677 views) (670 thread views)

Oil Temperatures - Kam 2006-07-03 03:23:25 (809 views) (2226 thread views)
- 93 deg C is nothing to be concerned about. - Jeremy (the original) 2006-07-06 19:02:43 (715 views)
  - Re: 93 deg C is nothing to be concerned about. - Kam 2006-07-07 04:04:53 (781 views)
- Guess no one here has oil temp gauge in-car then? (nt) - Kam 2006-07-05 11:32:27 (756 views)
  - 180 F fro me. (nt) - claylake 2006-07-11 20:35:14 (772 views)

Pics of sc install on my e39 540 (url) (pic) - DB540 2005-05-20 17:22:16 (2474 views) (4593 thread views)
- Re: Pics of sc install on my e39 540 - Joe 2006-07-11 18:02:30 (819 views)
- Re: Pics of sc install on my e39 540 - hector 2006-06-20 23:35:28 (833 views)
- How's it going now? - Jims5 2006-05-31 03:18:44 (821 views)
- Did you get the software in? How does it run? (nt) - 540sport ©⁷⁹ 2005-06-04 01:21:35 (824 views)
  - Yep, I got it back last night... (url) - DB540 2005-06-04 12:38:37 (1341 views)

Dinan SC'ed E36 M3 - Andrew Miller 2006-06-24 19:06:19 (1381 views) (4708 thread views)
- Re: Dinan SC'ed E36 M3 - Dynopowa 2006-06-25 02:36:23 (1134 views)
  - Re: Dinan SC'ed E36 M3 - Andrew Miller 2006-06-25 08:33:33 (1061 views)
    - Re: Dinan SC'ed E36 M3 - Dynopowa 2006-06-25 20:21:17 (947 views)
      - Re: Dinan SC'ed E36 M3 - Andrew Miller 2006-06-25 21:43:29 (864 views)
        Re: Dinan SC'ed E36 M3 - Andrew Miller 2006-06-28 20:29:23 (823 views)
        I test drove that car a while ago before deciding - Molie 2006-07-07 22:55:17 (947 views)
        Re: I test drove that car a while ago before deciding - Andrew Miller 2006-07-11 10:57:41 (890 views)

535i mass airflow sensor. - Joe 2006-07-10 17:58:57 (851 views) (839 thread views)

Turbos (url) - Faisal in Laurel, MD 2006-07-06 15:27:09 (853 views) (844 thread views)

Oil Temperatures - Kam 2006-07-03 03:22:41 (698 views) (691 thread views)

Pages: 1 2 3 4 5 6 7 8 9 10 - Older>>