Re: Outside mirror installation (archive)
[ Follow Ups ] [ 5-series (E12) Message Board ] [ Msg. Board FAQ ]
Posted by Karl on July 26, 2001 at 11:57:57:
In Reply to: Outside mirror installation posted by David Simmons on July 25, 2001 at 09:40:03:
(posted from: stl-proxy-04.boeing.com (12.13.248.4))
Assuming the blanking plate is held on the same way the mirror is...On the inside of the door, pry off the triangular black plastic trim piece that backs up the mirror. Once the trim is off, you have access to screws that hold the mirror on.
Follow Ups:
[ Follow Ups ] [ 5-series (E12) Message Board ] [ Msg. Board FAQ ]