FYI: Location of Warm up regulator on 323i... (archive)
[ Follow Ups ] [ 3-series (E21) Message Board ] [ Msg. Board FAQ ]
Posted by DHoang on February 22, 2001 at 12:02:42:
In Reply to: THe exact problem persisted w/ mine, but not coil posted by DHoang on February 22, 2001 at 08:59:49:
(posted from: ip227.austin17.tx.pub-ip.psi.net (38.27.175.227))
The regulator is a rectangular block (approx. 1.5" x 3" x 2" ) that's bolted w/ two hex bolts onto a spacer which is bolted onto the left front side (Driver's side on US model) of the motor. The regulator resides in-between the rear of the alternator and the front of the ignition distributor. An electrical plug rectangularly shaped connects to the regulator. A vacuum hose and two fuel hoses (coming from the fuel distributoer) also connects to the regulator.
HTH...
Follow Ups:
[ Follow Ups ] [ 3-series (E21) Message Board ] [ Msg. Board FAQ ]