Re: 320i steering question(long) heeeeeeeelp (archive)
[ Follow Ups ] [ 3-series (E21) Message Board ] [ Msg. Board FAQ ]
Posted by Peter S on July 07, 2001 at 15:56:41:
In Reply to: Re: 320i steering question(long) heeeeeeeelp posted by John on July 07, 2001 at 14:57:09:
(posted from: adsl-64-171-80-106.dsl.lsan03.pacbell.net (64.171.80.106))
Tight and sticking are very different things. If its sticking then the rack is probably set too tight or out of oil/grease (don't know which). I haven't looked for it but there should be an adjusting bolt/screw on the rack somewhere. Check a manual. If not the rack then next is seized upper strut bearing or tie rod ends.
Peter S
Um, its a manual rack so the steering is supposed to be tight. As for the problem you are describeing other wise i am a bit confused and probably would need to drive the car to understand it. But never fear Peter S or DHoang should be along shortly with far more insight than i have.
Follow Ups:
[ Follow Ups ] [ 3-series (E21) Message Board ] [ Msg. Board FAQ ]