Re: "Tom" (archive)
[ Follow Ups ] [ 7-series (E23) Message Board ] [ Msg. Board FAQ ]
Posted by Tom M. on January 21, 2001 at 22:39:50:
In Reply to: "Tom" posted by Jens on January 21, 2001 at 17:53:36:
(posted from: dap-208-166-66-243.erie-tnt-1.pa.erie.net (208.166.66.243))
Reg. to the Resister plates,
if you replaice them with other used ones,
and it should work great, but if it only ends up
working on one low speed, trye to exchange one out of your old box, both sides are the same boards, sometimes the one goes bad, and it seems
like bothe of them are, but they are not both,Hope this helps.
jens
Thanks for the tip Jens.
I would agree that the chance of both 'packs' going at the same time is highly unlikely.
I will do as you suggest and change one at a time to isolate the problem 'pack'.
Regards,
Tom Marino in PA
Follow Ups:
[ Follow Ups ] [ 7-series (E23) Message Board ] [ Msg. Board FAQ ]