Re: 745i pulse generator (archive)
[ Follow Ups ] [ 7-series (E23) Message Board ] [ Msg. Board FAQ ]
Posted by demet on May 18, 2001 at 14:04:41:
In Reply to: 745i pulse generator posted by r robertson on May 18, 2001 at 11:59:13:
(posted from: ns1.pfizer.com (12.18.36.49))
What does the connector look like? I know that a reference and speed sensor are located on the tranny bell housing with the connectors (3 pins each) running to the top back of engine. The is a hall sensor on the front of the engine just under the distributor that monitors the front damper pin. And there is a spark pulse sensor (2 pins) that slips over one of the spark plug wires at the distributor. demet
my car died at an intersection while actually performing fairly well. i checked the coil and had constant power and no pulse. an experienced bimmer mech told me pulse generator so i bought one and cannot find where it goes. i do not have any workshop manuals so it is diff to locate. please help with location or other suggestions that may cause this. is this fairly common part failure.
Follow Ups:
[ Follow Ups ] [ 7-series (E23) Message Board ] [ Msg. Board FAQ ]