|
In Reply to: NO! posted by Bruce H 85 745 ATL on February 17, 2002 at 20:19:20:
I had a go earlier, and to may cost, I melted a bulb and a fuse.
$20 mistake!
I'll do it your way now!
Thanks for the advice, however I also have some Hela diriving lights to add also.
These are not new, and I don't have instructions. There is only two wires from each lamp. I tried earlier to clip the wires onto the connectors on the dip beam headlamps on the car, - would this be the right thing to do, or would it overload the lights in anyway.
Sorry to be so vague and unknowledgeable - I am not great at wiring, and am just looking to clip the wires onto something with the existing headlights (ie the Hella ones light up when the dip beams do).
Regards
Jaz
Jaz!
YOU are WELCOME here any time,
if I where you I would make a fusable new line,
And a separat switch,
And please do not post with out e-mail adress
if you would.
Soincerely Jens
Many e30s came with fog lights. Check the junkyards for the switch location and switch.
Bruce H
85 745
81 323 Baur
Do not wire the driving lights to the lo(dip) beams. Too much load The proper way utilizes a relay and a fused supply.
Bruce H
85 745
81 323 Baur
© 1997 -
2009
Jump Internet Inc. All rights reserved.
