The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
E-32 7 series rotors - I second that (archive)
[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]
Posted by Chris on March 12, 2000 at 15:25:09:

In Reply to: Re: Brake Upgrade for M6 posted by LouisH/BCG on March 12, 2000 at 15:04:14:

Karl, I put them on my regular-spec 635 and the performance is a great value. No more braking shimmy, too.
Chris

: Karl,
: If you already have the M front brakes, just put on a set of front rotors from E32 7series cars. This will be lot cheaper than M rotors, and will eliminate the warping problem due to improper venting you get with M rotors with those holes in the rotor hat. Try rebuilding the M calipers first, if I were you. Rebuild kits can be had for very little money (like in the order of $20) Also, get yourself a set of E34 540/M5 rear calipers (E32 740 will work also... E34 750 will be ok but has to be after build date of 1/90: info courtesy of Rod Moore/BCG) if you still have stock E24 rear calipers. These take 300x20mm vented rear rotors and will give you better stopping power. I got my pair for $130, used.

: If $$$$ is not an issue, check out the "Big Brake" upgrade at www.ultimategarage.com, those are some serious brakes!!

: Good luck,
: Louis



Follow Ups:


[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2008 Jump Internet Inc. All rights reserved.