The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: Anybody had problems with replacement tie rods (archive)
[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]
Posted by Steve Haygood on April 07, 2000 at 22:06:50:

In Reply to: Anybody had problems with replacement tie rods? posted by Perry Jones on April 07, 2000 at 20:57:35:

I guess the question is .. What brand is it ? I have had some warranty claims against Febi Bilstein steering components. If you want to make sure of quality, buy Lemforder. All of our parts are guaranteed, but I have had more warranty claims on Febi Bilstein. Haven't had the problem you describe however with either brand


: Just put brand new front suspension on my 84 633. New control arms and complete steering linkage. First trip out the driveway with a hard turn to the right induced a distinct and disconcerting CLUNK.

: After much wiggling of the steering wheel it turns out that the bolt for the inner ball joint on the driver side is grinding on the frame brace behind the front subframe. Looking at the balljoint bolt revealed that the replacements are longer than the stock ones I took off. This thing plowed an eighth inch groove in the frame brace.

: Did the same thing to a friend's E28 last week with identical parts and there is no interference. Anybody else had this problem with replacement parts? It looks like the brace needs to be ground away for balljoint bolt clearance.

: TIA
: PJ



Follow Ups:


[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2009 Jump Internet Inc. All rights reserved.