Re: SHIFTER POPPED OUT OF TRANNY!!!!!!!! (archive)
[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]
Posted by dd on May 07, 2000 at 12:22:30:
In Reply to: SHIFTER POPPED OUT OF TRANNY!!!!!!!! posted by cliff on May 06, 2000 at 21:17:34:
(posted from: cs2887-173.austin.rr.com (24.28.87.173))
: Last night coming off the expressway, i reached for the shifter to down shift from 5th and to my suprise, the shifter had separated itself from the tranny! In other words, the car was still in 5th but the shifter was flopping around from side to side! When i pulled the shifter boot away i found that the mine has the set up where my shifter comes off by removing a retaining ring with a pair of needle nose pliers then the shifter itself comes out. But the retain ring is still intact! Has anyone had this problem? Please, dont tell I'M screwed as the trans is now shot! Despreately looking for answers!
: cliff.
Best to just take a look.
My shifter support bracket broke recently; could be that. I was able to replace it ($29) without dropping the driveshaft and muffler.
Could also be any of several clips. If a clip fell off then you may have lost the nylon washers (spacers) too. Be sure to replace those washers if they fell off or it will shift very sloppily.
Follow Ups:
[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]