Re: Programable SDS-EM2D fuel injection (archive)

I would really like to learn more about this unit!
What does it do?
What increase in power was obtained?
Any comments: user friendly, ease of installation, etc.?
Is there a web site for this product?
TIA

SDS-EM2D is the new fuel system I installed on my 3.5 l euro M30 engine about 2+ years ago. It is a totally user programable fuel system and replaces the bosch L-jet the car came with. I figure about 10-15% increase in performance over the stock system (mostly by removing the AFM) (g-tech results avg 0-60 7.2 sec, 1/4 mile 15.4 or so)

It took me about 4-5 hours to install it --mostly trying to figure out a mounting points for the ecu (stock location works fine) and the wiring for the fuel pump off the dual relay etc.

I like the system and it's easy to program (with exception of NO cold start injector option). The new SDS EM3 looks much better --no extra fuel injector driver to install etc.

Stats on my engine:

81' 3.5l euro six (stock cam, 9.3 compression --190 psi on all cylinders)
stock (blueprinted) injectors w/4.0bar fuel regulator and stock l-jet intake manifold
stahl headers feeding to a single glass pack rear muffler (no cat)
light 8 lb custom aluminum flywheel w/sachs sport clutch
K & N intake filter
CR tranny to a 3.45 lsd

close to 240hp....
now I'm installing a schrick 282 cam in the next couple weeks -- should be fun!

SDS fuel systems

Follow Ups:

stock (blueprinted) injectors Zack 23:45 8/01/2000 (1)
- I am rebuilding my Euro block, adding 86mm crank & Peter/BCG 00:02 8/02/2000 (0)

[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.