Grrr, Speedo finally went south.... (archive)
[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]
Posted by Adam/630CSi on February 11, 2001 at 22:08:06:
(posted from: ool-18b97dc1.dyn.optonline.net (24.185.125.193))
After 7 years of my speedo doing the "bouncing" thing at low speed untill about 15-20 mph, then getting steady, it finally does not move other than a bit of bouncing at take-off then sitting at 0mph with the ittermittant flickering bouncing every several seconds but otherwise not registering a speed.First off, it is an E-12 based 1977 630CSi, NOT the E-28 based later models.
Are the basics the same between chassis platforms? I.E., electric sensors and what is the best way of trouble shooting the end of the problem? can I use a degreaser to clean the sensor at the rear of the driveshaft to see if that is the culprit and if so, what am I looking for?
What other areas may be a notable culprit before I do a dash removal?(uuurgh)
TIA
Follow Ups:
[ Follow Ups ] [ 6-series (E24) Message Board ] [ Msg. Board FAQ ]