I just replaced mine over the weekend-Slyvania Halogens #5001 outboard low beams, and #5006 for inboard hi-beams (double-check the package, they're marked clearly in white graphics). Besure your lamp switch is pushed-in the off position and carefully remove the grilles (the two 8mm nuts that hold-in each side marker from the inside fender, under the hood, may be rusted tight-be careful not to over torque'm when loosening-tap them gently to break-off crud and corrosion, then back them off slowly). Use a small cup to hold onto all the loose screws. The lamps simply unplug (3-prong)for new replacements.