bimmer.org forums: BMW 6-series (E24) Forum Archive, 2000 week 50

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW 6-series (E24) Forum Archive, 2000 week 50
The bimmer.org E24 Forum exists to provide all 1976-1989 BMW E24 6-series owners and enthusiasts an open forum to discuss this series of BMWs.

Search Archives

shimmy fix on a 6 - ken garchow 23:56 12/17/2000 (2)
- Re: shimmy fix on a 6 - Jim Moran 12:53 12/18/2000 (0)
- Re: shimmy fix on a 6 - dwm 11:36 12/18/2000 (0)
Cross Drilled Rotors? Pros or Cons - Johnny 22:45 12/17/2000 (3)
- What about slotted rotors??? (nt) - Sam 10:34 12/19/2000 (0)
- Re: Cross Drilled Rotors? Pros or Cons - Tom M. 00:13 12/18/2000 (0)
- Re: Cross Drilled Rotors? Pros or Cons (url) - Rob Anderson 23:33 12/17/2000 (0)
Need help with '79 323i fuel problem... - dang 21:14 12/17/2000 (1)
- Re: Need help with '79 323i fuel problem... - Bob 23:44 12/17/2000 (0)
Car Cover - Daniel L. 19:04 12/17/2000 (3)
- Do they make one that encapsulates the entire car? - john 22:53 12/17/2000 (2)
  - Beverly Hills Motoring Accessories in - guess - where - has them. (nt) 08:53 12/18/2000 (0)
  - Re: Do they make one that encapsulates the entire - Aaron G. 23:55 12/17/2000 (0)
Just got my suspension installed! - Joe ///M 18:12 12/17/2000 (4)
- BMP Design is @ www.bmpd.com See text... - Joe ///M 22:23 12/18/2000 (0)
- Re: Just got my suspension installed! - Fred 16:53 12/18/2000 (0)
- Re: Just got my suspension installed! - Casey 16:25 12/18/2000 (0)
- Re: Just got my suspension installed! - Michael 05:26 12/18/2000 (0)
85 635 trunk emblem - E.J. Vander Lugt 18:08 12/17/2000 (2)
- Re: 85 635 trunk emblem - LouisH 19:56 12/17/2000 (1)
  - Re: 85 635 trunk emblem - EJ 23:04 12/20/2000 (0)
FS 87' L6 - Frank 17:10 12/17/2000 (0)
rubber trunk seal detaching - chuck 17:01 12/17/2000 (1)
- Re: rubber trunk seal detaching (url) - Rob Anderson 21:31 12/17/2000 (0)
Frozen door locks - john 14:06 12/17/2000 (9)
- Re: Frozen door locks - Bob K 15:35 12/18/2000 (0)
- Re: Frozen door locks - John H. 14:40 12/17/2000 (7)
  - Re: Frozen door locks - Aaron G. 16:11 12/17/2000 (6)
    - whoops read this one Re: Frozen door locks - Aaron G. 16:13 12/17/2000 (5)
      - Re: whoops read this one Re: Frozen door locks - John H. 17:05 12/17/2000 (4)
        
        Re: whoops read this one Re: Frozen door locks - John H. 17:07 12/17/2000 (3)
        
        Re: whoops read this one Re: Frozen door locks - Aaron G. 23:58 12/17/2000 (2)
        
        Re: whoops read this one Re: Frozen door locks - john 06:19 12/18/2000 (0)
        
        Re: whoops read this one Re: Frozen door locks - John H. 02:11 12/18/2000 (0)
1980 633csi - jon trask 13:59 12/17/2000 (5)
- Re: 1980 633csi - Ross 17:04 12/17/2000 (3)
  - Sun Roof Seals, Cost?(was Re: 1980 633csi) - Joseph Harkins 19:07 12/17/2000 (2)
    - Re: Sun Roof Seals, Cost?(was Re: 1980 633csi) - Bob Berry 19:24 12/17/2000 (1)
      - Re: Sun Roof Seals, Cost?(was Re: 1980 633csi) - Joseph Harkins 19:36 12/17/2000 (0)
- Re: 1980 633csi - BB 15:31 12/17/2000 (0)
6 Spotted For Sale - JoeB 08:56 12/17/2000 (2)
- Re: 6 Spotted For Sale - Bob Duckworth 19:55 12/17/2000 (1)
  - Re: 6 Spotted For Sale - Bob Duckworth 19:56 12/17/2000 (0)
The dreaded front end shimmy... - David Stewart 22:02 12/16/2000 (6)
- Re: The dreaded front end shimmy... - Bob Duckworth 19:57 12/17/2000 (1)
  - Urethane is not harsh on the e24 n/m - Bob 23:33 12/17/2000 (0)
- Re: The dreaded front end shimmy... - Joe ///M 23:32 12/16/2000 (3)
  - Re: The dreaded front end shimmy... - David Stewart 01:46 12/17/2000 (2)
    - OOOPS! See D.R.'s link, Borbet wheels are fine... - Joe ///M 10:45 12/17/2000 (0)
    - Here's the link to BMP David (url) (nt) - D.R. Dickey 07:18 12/17/2000 (0)
More coolent questions - David Stewart 21:59 12/16/2000 (0)
Anybody have the exhaust cam on their M6? - D.R. Dickey 18:28 12/16/2000 (9)
- Sorry - that's exhaust cam GEAR. (nt) - D.R. Dickey 18:29 12/16/2000 (8)
  - It's timed that way for a reason. - Joe ///M 23:40 12/16/2000 (7)
    - Sorry, but I strongly disagree (more) (url) - ///M Blitz 08:31 12/17/2000 (3)
      - That's a badass ///M6, BTW. - Joe ///M 23:12 12/17/2000 (0)
      - //MBlitz - did you install your cam gear? - D.R. Dickey 13:06 12/17/2000 (1)
        
        I had Bullet Performance in Costa Mesa, Ca do - it (nt) 08:49 12/18/2000 (0)
    - Have you driven a car with one Joe? - D.R. Dickey 07:30 12/17/2000 (2)
      - Re: Have you driven a car with one Joe? - Joe ///M 18:39 12/17/2000 (1)
        
        I think the engineer's name is probably Dieter! - Mark Silva 15:17 12/19/2000 (0)
WTB: Bosch Switch - Mike 15:15 12/16/2000 (0)
Permant removal of M6 muff-ler - Moses Grimes 14:30 12/16/2000 (2)
- Re: Permant removal of M6 muffler - BobK 14:44 12/16/2000 (1)
  - OOOH mah gawd, you gaaaauuuuys! - Jab 10:59 12/17/2000 (0)
FS 1985 635CSi >> on eBay (url) (pic) - Chris 11:36 12/16/2000 (0)
need rear clip 82 635 csi euro - randall 10:04 12/16/2000 (2)
- Re: need rear clip 82 635 csi euro - DanL 15:17 12/17/2000 (1)
  - Re: need rear clip 82 635 csi euro - Randall 22:05 12/17/2000 (0)
what should I pay for a 88 L6 details to follow.. - Craig Day 00:49 12/16/2000 (10)
- Re: what should I pay for a 88 L6 details to follo - Mike 16:42 12/17/2000 (1)
  - If it's White, and you can tell it's been hit... - Bodyman 22:47 12/17/2000 (0)
- Correction: 87 L6 and it has had some body work - Craig Day 14:05 12/17/2000 (1)
  - Re: 87 L6 - Gareth 21:28 12/17/2000 (0)
- A million bucks! There were no 88 L6s... - Can o' Worms 23:50 12/16/2000 (0)
- Re: what should I pay for a 88 L6 details to follo - 89635 21:37 12/16/2000 (0)
- Re: what should I pay for a 88 L6 details to follo - Austin 18:55 12/16/2000 (0)
- I'm from Utah, and will look it over for you if - James Lee 11:20 12/16/2000 (0)
- Re: what should I pay for a 88 L6 details to follo - 89635 09:03 12/16/2000 (1)
  - Re: what should I pay for a 88 L6 details to follo - Bob Duckworth 11:01 12/16/2000 (0)
Wierd crusing symptoms - David Stewart 20:02 12/15/2000 (2)
- Re: Wierd crusing symptoms - John Millward 03:45 12/18/2000 (0)
- Re: Wierd crusing symptoms - john 11:13 12/16/2000 (0)
FS: Authentic EURO Plates! - Aaron 16:54 12/15/2000 (0)
Rear Main Seal - Travis Parmer 16:17 12/15/2000 (4)
- Re: Rear Main Seal - Ted 23:01 12/15/2000 (0)
- Re: Rear Main Seal - BB 19:28 12/15/2000 (0)
- Re: Rear Main Seal - Aaron 16:57 12/15/2000 (1)
  - Re: Rear Main Seal - Austin 19:03 12/16/2000 (0)
Body/Interior colors - John 14:55 12/15/2000 (15)
- Decision has been made...THANKS EVERYONE! - John 13:27 12/17/2000 (1)
  - Comet...Sounds scary to me...Try this! - JoeB 06:34 12/18/2000 (0)
- Re: Body/Interior colors - WH 10:21 12/16/2000 (4)
  - Re: Think of it this way............ - Lars Cousineau 02:14 12/17/2000 (0)
  - I agree with the above and. . . - LarryM 18:17 12/16/2000 (1)
    - Re: I agree with the above and. . . - Charles 21:48 12/16/2000 (0)
  - Re: Body/Interior colors - John 10:46 12/16/2000 (0)
- 1987 Body/Interior colour list from brochure - Stu '87 M6 09:54 12/16/2000 (1)
  - Re: 1987 Body/Interior colour list from brochure - John 10:42 12/16/2000 (0)
- As far as other colors go....... - Dart 22:22 12/15/2000 (0)
- Re: Body/Interior colors - Glen 15:04 12/15/2000 (0)
- Man, I wouldn't change the color- - Mark Silva 15:02 12/15/2000 (3)
  - Re: Man, I wouldn't change the color- - John 15:26 12/15/2000 (1)
    - Re: Man, I wouldn't change the color- - John 15:28 12/15/2000 (0)
  - Other colors look better; I have one a white one - Glen 15:07 12/15/2000 (0)
Check my work plz. (url) - Ian@BMWToys 13:45 12/15/2000 (6)
- Add a reverse look up.. - Dave 20:00 12/17/2000 (0)
- Re: Check my work plz. - Dart 22:24 12/15/2000 (0)
- You don't have the 635 listed for '85 - Glen 14:13 12/15/2000 (3)
  - Re: 633 and 635 in '85? (url) - Ian@BMWToys 15:50 12/15/2000 (2)
    - Yes, I think so. I have a '85 635 - Glen - 09:02 12/16/2000 (1)
      - No 633 in '85. - Vinny S. 01:32 12/17/2000 (0)
very rich fuel mixture - derek 10:43 12/15/2000 (3)
- Re: very rich fuel mixture - ray koke 05:47 12/17/2000 (0)
- Checking for Rich Mixture - Bob 11:12 12/15/2000 (1)
  - Re: Checking for Rich Mixture - derek 07:18 12/18/2000 (0)
ABS Light Comes on at 100 MPH - NIck 10:14 12/15/2000 (3)
- Check wheel hub teeth for rusting/missing teeth - LouisH 11:18 12/15/2000 (2)
  - Re: Check wheel hub teeth for rusting/missing teet - NIck 13:15 12/15/2000 (1)
    - BCG FAQ on ABS - LouisH 14:10 12/15/2000 (0)
Car alarm? - Tom Whaley 09:32 12/15/2000 (5)
- How it works - Keith F 20:44 12/17/2000 (0)
- Factory Alarm - Sam 09:47 12/15/2000 (3)
  - Re: Factory Alarm - Chris 10:35 12/15/2000 (2)
    - Hmmm. - Sam 11:02 12/15/2000 (1)
      - Re: Hmmm. - NIck 13:13 12/15/2000 (0)
Need to anodize a chrome piece... - Justin Gibson 09:32 12/15/2000 (1)
- Re: Need to anodize a chrome piece... - dd 11:40 12/15/2000 (0)
Steering Problem - Tom Whaley 09:31 12/15/2000 (2)
- Wet belt, pump was slipping. Probably need to ret - Rainman 09:46 12/15/2000 (1)
  - Re: Wet belt, pump was slipping. Probably need to - Nick 14:14 12/15/2000 (0)
<--Need front ABS sensors - D.R. Dickey 08:22 12/15/2000 (0)
Power Steering noise - Greg H 06:57 12/15/2000 (4)
- Re: Power Steering noise - dd 11:45 12/15/2000 (0)
- Re: Power Steering noise - EdP 08:17 12/15/2000 (2)
  - Can be caused by... - BobK 14:17 12/16/2000 (1)
    - Re: Be sure belt is tight... - skyranch 18:49 12/17/2000 (0)
86 euro front bumper for sale - michael 05:29 12/15/2000 (0)
lowering front of 88 m6 - ken garchow 23:54 12/14/2000 (4)
- Re: lowering front of 88 m6 (url) - dimitri 13:53 12/17/2000 (0)
- Re: lowering front of 88 m6 - D.R. Dickey 08:11 12/15/2000 (2)
  - Re: lowering front of 88 m6 - ken garchow 10:01 12/15/2000 (1)
    - see my above post on my new suspension!!! EOM - Joe ///M 18:44 12/17/2000 (0)
6er Meet in Newport Beach Dec. 17th - DavidL 22:58 12/14/2000 (5)
- Re: 6er Meet in Newport Beach Dec. 17th - JoeB 08:04 12/16/2000 (0)
- Re: 6er Meet in Newport Beach Dec. 17th - Bruce 16:37 12/15/2000 (1)
  - Re: 6er Meet in Newport Beach Dec. 17th - DavidL 23:19 12/15/2000 (0)
- I'll be there! (nt) - Mark 12:59 12/15/2000 (0)
- I'll be there - Who else? - JoeR 11:56 12/15/2000 (0)
F/S 16"wheels w/Nitto NT450's new - Matt H 22:21 12/14/2000 (0)
parts for sale - Stephen Brown 21:21 12/14/2000 (12)
- Re: parts for sale - John 15:19 12/16/2000 (2)
  - Re: parts for sale - Stephen Brown 14:42 12/17/2000 (1)
    - Re: parts for sale - John H. 23:29 12/17/2000 (0)
- Re: parts for sale - Will D.84 633 14:47 12/16/2000 (1)
  - Re: parts for sale - Stephen Brown 14:41 12/17/2000 (0)
- Re: parts for sale - Bob S 14:40 12/15/2000 (6)
  - Re: parts for sale - Stephen Brown 14:36 12/17/2000 (0)
  - Re: parts for sale - Will D.84 633 14:38 12/16/2000 (4)
    - Re: Front fenders, are they good? - skyranch 18:55 12/17/2000 (3)
      - Re: Front fenders, are they good? - Stephen Brown 23:49 12/20/2000 (2)
        
        Re: Front fenders, where & how much? - skyranch 21:27 12/21/2000 (1)
        
        Re: Front fenders, where & how much? - Stephen Brown 10:41 12/25/2000 (0)
visit the e28 club (url) (nt) - marc 20:21 12/14/2000 (5)
- In defense: My Rottweiler likes the ... - Chris_in_vermont 09:11 12/18/2000 (0)
- Wrong board sedan man this is the coupe group YEAH (nt) - D.R. Dickey 08:14 12/15/2000 (0)
- Why would a CSi owner want to? - Donnie 22:37 12/14/2000 (2)
  - To see what the good life is like - ok 12:10 12/16/2000 (1)
    - The M6 WAS manufactured BY Motorsport, nimrod... - Joe ///M 18:48 12/17/2000 (0)
One tire wearing on edge - Alan 20:20 12/14/2000 (2)
- Re: One tire wearing on edge (url) - Rob Anderson 23:15 12/14/2000 (1)
  - no accidents I know of (nt) - Alan 09:33 12/15/2000 (0)
Radiator Removal Question - Larry Rotondo 19:07 12/14/2000 (3)
- Re: Radiator Removal Question (url) - Rob Anderson 23:20 12/14/2000 (2)
  - Fan clutch removal not necessary (url) - Ed 07:30 12/15/2000 (1)
    - It takes less than five minutes to remove the fan - Rainman 09:41 12/15/2000 (0)
OBC Bulb Replacement - Larry Rotondo 19:02 12/14/2000 (0)
WTB: Shifter Boot (blk) & Taillight Chromes 79 635 - Mark 18:40 12/14/2000 (0)
Glove box wont open - John 18:06 12/14/2000 (3)
- Re: Glove box wont open (url) - Rob Anderson 18:49 12/14/2000 (2)
  - Re: Glove box wont open - Stephen Brown 21:24 12/14/2000 (1)
    - Re: Glove box wont open (url) - Rob Anderson 23:11 12/14/2000 (0)
635 No Muffler?!? - Sam 16:44 12/14/2000 (8)
- Re: 635 No Muffler?!? - Chris Morgan 05:59 12/15/2000 (0)
- Re: 635 No Muffler?!? - Curtis 17:17 12/14/2000 (6)
  - Re: 635 No Muffler?!? (url) - Rob Anderson 18:45 12/14/2000 (5)
    - How can that be true?... - Zack 02:37 12/16/2000 (1)
      - Re: How can that be true?... (url) - Rob Anderson 18:59 12/16/2000 (0)
    - Re: 635 No Muffler?!? - Curtis 15:50 12/15/2000 (1)
      - Re: 635 No Muffler?!? (url) - Rob Anderson 19:02 12/16/2000 (0)
    - Explain Please! - John Millward 07:50 12/15/2000 (0)
Heishman BMW is now BMW of Arlington (m) - Fred Meloan 16:19 12/14/2000 (0)
HELP! Need Mechanic Referral - LA/South Bay - Neal Sullivan 14:48 12/14/2000 (2)
- Randy @Blackforest BMW in Costa Mesa - JoeR 16:33 12/14/2000 (0)
- Re: HELP! Need Mechanic Referral - LA/South Bay - Clinton 15:46 12/14/2000 (0)
Antifreeze - Jon 14:46 12/14/2000 (5)
- Why not use Bmw oem the blue stuff,without phospha - Rainman 09:20 12/15/2000 (0)
- Re: Antifreeze - John 08:30 12/15/2000 (0)
- Antifreeze question - D.R. Dickey 21:24 12/14/2000 (0)
- Re: Antifreeze - rduckwor 15:42 12/14/2000 (1)
  - Re: Antifreeze - Jon 06:50 12/15/2000 (0)
www.clube31.com (url) (pic) - E31 13:34 12/14/2000 (0)
Fuse Layout - Joey 13:05 12/14/2000 (0)
REAR SPOILER - Joey 13:02 12/14/2000 (2)
- Re: REAR SPOILER - radarbob 14:57 12/14/2000 (1)
  - Re: REAR SPOILER - Joey 07:19 12/18/2000 (0)
AC upgrade to R134a - Bruce 12:57 12/14/2000 (3)
- Re: AC upgrade to R134a - Brucej 17:35 12/14/2000 (0)
- Re: AC upgrade to R134a - EdP 14:14 12/14/2000 (0)
- Re: AC upgrade to R134a (url) - Erich 13:25 12/14/2000 (0)
Experience with fan clutch too stiff - Brian 11:46 12/14/2000 (2)
- Re: Experience with fan clutch too stiff - LouisH 16:46 12/14/2000 (0)
- Re: Experience with fan clutch too stiff - dd 15:06 12/14/2000 (0)
Santa'a reviewing your X'mas 6er wish list! - Paul (CapeCod) 11:37 12/14/2000 (0)
Santa'a reviewing your X'mas 6er wish list! - Paul (CapeCod) 11:37 12/14/2000 (0)
WTB: 3.46 LSD Diff - Ari 10:03 12/14/2000 (0)
SLS Removal...How? - Derek 09:43 12/14/2000 (2)
- Re: SLS Removal...How? - Derek 09:44 12/14/2000 (1)
  - Disconnect line at shock to let out fluid, remove - Peter/BCG 19:06 12/14/2000 (0)
Control arms F/S - D.R. Dickey 07:47 12/14/2000 (0)
K-Mac parts out of Australia? - Pete 07:37 12/14/2000 (2)
- Re: K-Mac parts out of Australia? - Julian Seeger 18:21 12/14/2000 (1)
  - Re: K-Mac parts out of Australia? - Pete 06:04 12/15/2000 (0)
Anyone have Sept 98 "Classic & Sportscar"? - Jim 03:39 12/14/2000 (0)
Chrome Mahle BBS wheels for sale in ATL. - Phillip 23:11 12/13/2000 (0)
Anyone heard of the e24 check list? - Merlin 21:22 12/13/2000 (1)
- Re: Anyone heard of the e24 check list? - rduckwor 06:59 12/15/2000 (0)
Vin tag on 1980 635 - raybob 17:24 12/13/2000 (3)
- Re: Vin tag on 1980 635 - Paul F 20:55 12/13/2000 (2)
  - Re: Vin tag on 1980 635 - mike 11:53 12/14/2000 (1)
    - Re: Vin tag on 1980 635 - raybob 17:30 12/18/2000 (0)
Wind noise question. - BobK 16:55 12/13/2000 (8)
- Re: Wind noise question. - Gary 12:32 12/14/2000 (0)
- Check rubber. Happened on my 528e. - Glen 17:13 12/13/2000 (6)
  - Seems okay, sprayed with silicone. - BobK 17:34 12/13/2000 (5)
    - DO NOT use silicone on rubber or vinyl - Zack 01:40 12/14/2000 (4)
      - Further on the subject (url) - Zack 23:12 12/16/2000 (0)
      - Re: DO NOT use silicone on rubber or vinyl - mike 11:54 12/14/2000 (1)
        
        You use a silicone remover available at paint and - Rainman 10:04 12/15/2000 (0)
      - Re: DO NOT use silicone on rubber or vinyl - mike 11:54 12/14/2000 (0)
1982 633CsI for sale - mark 16:43 12/13/2000 (0)
Help burning oil, how much is too much?? - Glen 16:00 12/13/2000 (2)
- Re: Help burning oil, how much is too much?? - Paul F 21:01 12/13/2000 (0)
- Re: Help burning oil, how much is too much?? - Bob 18:36 12/13/2000 (0)
Shift Boots - Gareth 14:56 12/13/2000 (5)
- Re: Shift Boots - Pete 09:10 12/14/2000 (0)
- Re: Shift Boots - Brian 09:09 12/14/2000 (0)
- Re: Shift Boots - Will D.84 633 08:32 12/14/2000 (0)
- $53 from dealer - Mike 18:25 12/13/2000 (0)
- They're ugly - D.R. Dickey 17:45 12/13/2000 (0)
Need advice on gear oil - 84 633CSi - James 12:55 12/13/2000 (2)
- Re: Need advice on gear oil - 84 633CSi - Jon 07:18 12/14/2000 (0)
- Re: Need advice on gear oil - 84 633CSi - Jerry 14:20 12/13/2000 (0)
Need advice on gear oil - 84 633CSi - James 12:52 12/13/2000 (1)
- Redline has a bad reputation! Use Mobil SHC 600 - Zack 01:51 12/14/2000 (0)
1985 635CSi >> For sale (url) (pic) - Chris 10:42 12/13/2000 (2)
- What's reserve? - TJ 15:09 12/13/2000 (1)
  - Its in this post - Chris 15:30 12/13/2000 (0)
ignition - Tim Anderson 10:06 12/13/2000 (0)
EURO 6 owners:WHERE IN THE HECK DO I GET INSURANCE - ???????????????? 09:03 12/13/2000 (10)
- Re: EURO 6 owners:WHERE IN THE HECK DO I GET INSUR - Joey 07:21 12/18/2000 (0)
- Try USAA if you can..... - Paul (CapeCod) 21:00 12/15/2000 (0)
- Probably book value is all you'll get.... - Tom Whaley 09:43 12/14/2000 (0)
- That's odd. Try StateFarm. - Austin 18:54 12/13/2000 (0)
- Re: EURO 6 owners:WHERE IN THE HECK DO I GET INSUR - Bob 18:39 12/13/2000 (0)
- I got USAA yrs ago, Dad was connected to Military - Mark Rob 17:36 12/13/2000 (1)
  - Do I tell uSAA it's a euro???????? thanks...eom - ??? 01:20 12/14/2000 (0)
- Re: EURO 6 owners:INSUR - Dave 11:10 12/13/2000 (2)
  - Say WHAT????? - ??? 14:18 12/13/2000 (1)
    - Re: Say WHAT????? - Bruce 14:46 12/13/2000 (0)
M6 Rear Ride Hieght - Mike 08:30 12/13/2000 (4)
- Re: M6 Rear Ride Hieght - Winston 16:10 12/14/2000 (0)
- Mine seems to think its..... - Tom M 20:49 12/13/2000 (2)
  - SLS is a worthless system IMO it should be removed - Zack 02:00 12/14/2000 (0)
  - Re: Mine seems to think its..... - Malcolm 22:31 12/13/2000 (0)
Spark-plugs - SanFe 07:43 12/13/2000 (4)
- Re: Spark-plugs - SanFe 03:50 12/14/2000 (0)
- Autolite - Bob 18:42 12/13/2000 (0)
- Re: Spark-plugs - Mark Silva 11:05 12/13/2000 (1)
  - Re: Spark-plugs - David 18:50 12/13/2000 (0)
Troubleshooting wipers? - Jerry 07:07 12/13/2000 (3)
- Re: Troubleshooting wipers? - Mark Silva 11:10 12/13/2000 (2)
  - It Works!! - marblefaun 08:45 12/17/2000 (0)
  - Re: Troubleshooting wipers? - Gary 14:45 12/14/2000 (0)
Wanted: Used Heater Fan - Please! - PeteB 07:01 12/13/2000 (1)
- Try these suppliers. - BobK 17:39 12/13/2000 (0)
NEED EURO 85 635 DRIVERS FENDER - Matt H 23:06 12/12/2000 (0)
DOOR CLOSING SOLUTION !!!!!!!!! - A.J. 22:40 12/12/2000 (3)
- Re: YES!!!!!!!!! - Charles 11:53 12/13/2000 (0)
- Re: DOOR CLOSING SOLUTION !!!!!!!!! - Joe ///M 08:59 12/13/2000 (0)
- Re: DOOR CLOSING SOLUTION !!!!!!!!! (url) - Rob Anderson 00:20 12/13/2000 (0)
Door closing solution? - A.J. 22:15 12/12/2000 (0)
Rotten Egg Smell - Bob Berry 22:14 12/12/2000 (2)
- Re: Rotten Egg Smell - Brucej 06:53 12/13/2000 (0)
- Been to a wedding or made a new enemy? (nt) - Gareth 23:28 12/12/2000 (0)
any site teaching how to maintance 635csi and tip (nt) - Mr_sha 21:31 12/12/2000 (1)
- Big Coupe Group (url) (nt) - Gareth 23:31 12/12/2000 (0)
16" 5 Star Fitapaladi Rims w/TIRES for SALE - JC 21:24 12/12/2000 (1)
- Re: 16" 5 Star Fitapaladi Rims w/TIRES for SALE - R. MCkinney 17:01 12/13/2000 (0)
Elgin Cams 278 anyone has used one - FS 19:02 12/12/2000 (0)
Bentley's manual for '89 635 csi - david 18:49 12/12/2000 (1)
- Re: Bentley's manual for '89 635 csi - JOHN S. 19:52 12/12/2000 (0)
Need moderators for the new BMW board (url) - Andrie 17:32 12/12/2000 (0)
86 euro doors for sale - michael 16:45 12/12/2000 (0)
door alignment/performance chips - ricky moore 16:26 12/12/2000 (4)
- Re: door alignment/performance chips - T.F. 20:49 12/17/2000 (0)
- What else do you need to get the increased hp? - Glen 16:56 12/12/2000 (2)
  - A chip is the best bang for the buck - Zack 02:13 12/14/2000 (0)
  - Re: What else do you need to get the increased hp? - john 18:05 12/12/2000 (0)
Paging Wayne Thomas - Geoff Oliver 15:53 12/12/2000 (0)
Anyone found the cupholder solution? - Johnny 15:47 12/12/2000 (6)
- Re: Anyone found the cupholder solution? - Troy K. 16:44 12/14/2000 (0)
- Re: Anyone found the cupholder solution? - Brian 09:56 12/13/2000 (0)
- Re: Anyone found the cupholder solution? - Chris Morgan 05:56 12/13/2000 (0)
- Oh Sweet lovely cupholders, they work great!!!!!! (url) - NIck 19:22 12/12/2000 (0)
- Re: cupholder solution? - 89 635CSI 16:21 12/12/2000 (0)
- Me too! Anyone have a solution? - Tom Whaley 15:48 12/12/2000 (0)
635 OEM tires - raybob 13:46 12/12/2000 (6)
- Re: 635 OEM tires - Jim 06:13 12/13/2000 (0)
- Re: 635 OEM tires - JOHN S. 14:41 12/12/2000 (4)
  - Re: 635 OEM tires - raybob 17:15 12/13/2000 (1)
    - Re: 635 OEM tires - Curtis 18:00 12/14/2000 (0)
  - Re: 635 OEM tires - Dave 18:49 12/12/2000 (1)
    - Re: 635 OEM tires - johnmpls 18:16 12/13/2000 (0)
Help! 86 635 needs a 5spd tranny! - Marc 13:28 12/12/2000 (3)
- Re: Help! 86 635 needs a 5spd tranny! - Chris 16:15 12/12/2000 (2)
  - Thnx for help but too late!!! - Marc 08:29 12/13/2000 (1)
    - Re: Thnx for help but too late!!! - George Cole 11:50 12/16/2000 (0)
Door closing problem - Ed 13:14 12/12/2000 (5)
- I had this problem.. FIXED! (see txt).. - Wise Crack 00:19 12/15/2000 (0)
- Possible easier solution - 89 635CSI 16:28 12/12/2000 (0)
- Re: Door closing problem - Mike 15:30 12/12/2000 (0)
- Re: Door closing problem (url) - Sam 13:42 12/12/2000 (0)
- Re: Door closing problem - Austin 13:38 12/12/2000 (0)
Suspesion Question - John 13:01 12/12/2000 (2)
- Re: Suspesion Question - Sam 13:49 12/12/2000 (0)
- Re: Suspesion Question - Bob 13:16 12/12/2000 (0)
What about chains? - Sam 11:50 12/12/2000 (2)
- Egads, NO! The notion of it sickens me... - James 14:10 12/12/2000 (1)
  - Agreed - Sam 14:18 12/12/2000 (0)
Winter Tire Advice - Sam 10:44 12/12/2000 (7)
- Fresh thoughts - Rich 20:08 12/12/2000 (1)
  - Rich - Sam 14:27 12/13/2000 (0)
- Re: Winter Tire Advice - Ed 13:18 12/12/2000 (4)
  - Re: Winter Tire Advice - Ed 08:24 12/13/2000 (1)
    - Ed-Same here - Sam 14:34 12/13/2000 (0)
  - Ed - Read this - Sam 13:33 12/12/2000 (1)
    - Re: Ed & Sam Read this! - Rich 21:16 12/18/2000 (0)
87 6er wont start in cold (even cool) weather - Travis Parmer 10:28 12/12/2000 (3)
- Thermo time switch or start injector. eom - Bob 13:17 12/12/2000 (2)
  - Huh? - Travis Parmer 16:29 12/12/2000 (1)
    - Re: Huh? - marblefaun 17:37 12/12/2000 (0)
83 633 For Sale in MI - ForSaleinMI 10:15 12/12/2000 (0)
What do you pay to insure your M6? - Jim 09:48 12/12/2000 (0)
M6 "upgrade kit" for sale IMMEDIATELY - A. Wane 08:49 12/12/2000 (0)
need frt.bumper endcaps..... - Gary Stoberl 07:42 12/12/2000 (8)
- Re: dealer has 'em.... - Gary Stoberl 06:57 12/13/2000 (1)
  - CHAD READ THIS - Sam 14:52 12/13/2000 (0)
- Dealer has them. Approx $135 a piece (nt) - Sam 10:00 12/12/2000 (4)
  - Re: Dealer has them. Approx $135 a piece - Chad 17:44 12/12/2000 (1)
    - Re: Dealer has them. Approx $135 a piece - Sam 14:38 12/13/2000 (0)
  - Re: Dealer has them. Approx $135 a piece - Chad 17:40 12/12/2000 (1)
    - Re: Dealer has them. Approx $135 a piece - Sam 14:42 12/13/2000 (0)
- Re: need frt.bumper endcaps..... - john 07:57 12/12/2000 (0)
Test lights? - Joseph Harkins 00:04 12/12/2000 (0)
1981, 1982, 1983? - Joseph Harkins 23:58 12/11/2000 (1)
- Re: 1981, 1982, 1983? - Greg Fragano 09:50 12/12/2000 (0)
Car smokes like a N.J. housewife. What's up? (nt) - J. Spiccoli 23:54 12/11/2000 (2)
- N.J. housewife????!!!! :). - A. Wane 07:48 12/12/2000 (0)
- Re: Car smokes like a N.J. housewife. What's up? - Michael 05:28 12/12/2000 (0)
LOCATION for GUAGES - Jim 20:33 12/11/2000 (4)
- Re: LOCATION for GUAGES - Ross 17:31 12/12/2000 (0)
- Re: LOCATION for GUAGES - Bobbo 10:19 12/12/2000 (0)
- Re: LOCATION for GUAGES - BMB 09:30 12/12/2000 (0)
- Re: LOCATION for GUAGES (url) - Austin 00:51 12/12/2000 (0)
NEW BMW boards using UBB format (url) - Andrie 20:19 12/11/2000 (1)
- The link doesn't work (nt) - Sam 09:58 12/12/2000 (0)
OOOH Boy! Don't order from NOPI!!! See Text... - Joe ///M 20:10 12/11/2000 (3)
- Re: OOOH Boy! Don't order from NOPI!!! See Text... - Craig McCall 20:29 12/11/2000 (2)
  - Re: OOOH Boy! Don't order from NOPI!!! See Text... - Neil G. 00:23 12/12/2000 (0)
  - Re: Craig - Joe ///M 00:13 12/12/2000 (0)
OBC Question - John 19:38 12/11/2000 (7)
- Re: OBC Question - Sam 14:32 12/12/2000 (2)
  - Re: OBC Question - John 21:08 12/12/2000 (1)
    - No sweat John - Sam 15:05 12/13/2000 (0)
- Re: OBC Question - John Millward 03:10 12/12/2000 (0)
- Re: OBC Question - david 19:49 12/11/2000 (2)
  - Re: OBC Question - John 19:53 12/11/2000 (1)
    - Re: OBC Question - j 23:05 12/11/2000 (0)
Tire Cupping - Mike 18:48 12/11/2000 (0)
V12 into a 6??? - sj 18:12 12/11/2000 (2)
- I's been done by a certain Allen in NJ. - Abdoul 19:12 12/11/2000 (0)
- I's been done by a certain Allen in NJ. - Abdoul 19:11 12/11/2000 (0)
How can you theif proof your COUPE??? - Calvin 18:01 12/11/2000 (11)
- Re: To theif proof your COUPE???...try this! - Paul (CapeCod) 11:27 12/14/2000 (2)
  - Better yet... - BobK 15:56 12/18/2000 (0)
  - Agreed - NIck 17:29 12/14/2000 (0)
- Re: Remove Plugs & Wheels everytime!!! (nt) - Bimmerdude 09:33 12/12/2000 (0)
- Re: 1 kilo of c4 explosive with a trip sensor - Jack 05:18 12/12/2000 (0)
- ideas - j 23:14 12/11/2000 (2)
  - Re: ideas - David Stewart 14:19 12/12/2000 (0)
  - yes, just the LED is a good idea, but... - Joe ///M 01:36 12/12/2000 (0)
- Believe it or not... - Joe ///M 20:26 12/11/2000 (1)
  - Bravo, Bravo!! - Sam 10:12 12/12/2000 (0)
- INSTALL 1 PIT BULL - JOHN S. 18:32 12/11/2000 (0)
Need right bumper rubber bellow 85 coupe - Calvin 17:58 12/11/2000 (0)
K-Mac Camber and Castor Kits - Julian Seeger 17:39 12/11/2000 (3)
- it is an EMAIL not URL - Julian Seeger 18:05 12/12/2000 (0)
- need better URL, but thanks (nt) - Mark Rob 22:39 12/11/2000 (1)
  - Re: need better URL, but thanks - David Stewart 14:21 12/12/2000 (0)
Wanted: 6 Series Tool Kit - CDR 17:16 12/11/2000 (5)
- Re: Wanted: 6 Series Tool Kit - sj 18:04 12/11/2000 (0)
- Can get new from factory for about $75 - LouisH 17:58 12/11/2000 (2)
  - Wrong Screw Driver - Mike 18:45 12/11/2000 (1)
    - Re: Wrong Screw Driver - Mike Barrett/BCG 19:40 12/11/2000 (0)
- watch ebay ... - Mike 17:22 12/11/2000 (0)
What's the Difference Between an 88 and 89 635CSi? - Joe 16:54 12/11/2000 (2)
- Re: What's the Difference Between an 88 and 89 635 - Vinny S. 20:17 12/11/2000 (0)
- I thought the '89 were left over '88? (EOM) - Glen - 18:59 12/11/2000 (0)
Want an M6 powered e24??? - A. Wane 15:41 12/11/2000 (0)
633csi a good car? - oz-man 15:41 12/11/2000 (2)
- Re: 633csi a good car? - Richard 13:08 12/12/2000 (0)
- Re: 633csi a good car? - Burk 00:08 12/12/2000 (0)
HELP!!! Stupid me, huge brake problems - Patrick 15:35 12/11/2000 (2)
- Trade them for a rebuilt set... - Zack 00:33 12/12/2000 (0)
- Re: HELP!!! Stupid me, huge brake problems - D.R. Dickey 19:17 12/11/2000 (0)
Valve Adjustment?? - Sam 15:31 12/11/2000 (2)
- Re: Valve Adjustment?? - dd 16:21 12/11/2000 (1)
  - Thanks DD - Sam 09:54 12/12/2000 (0)
Low Beam Check Relay on the board.... - Bud F. 12:35 12/11/2000 (1)
- Re: Low Beam Check Relay on the board.... - Tom M. 00:40 12/13/2000 (0)
WHAT BUMPER IS THIS ? (pic) (nt) - Is it a 6er ? 10:59 12/11/2000 (8)
- I had one on my '87 L6. It was identical. ctxt - Joe ///M 00:28 12/12/2000 (0)
- Will you sell it to me? - D.R. Dickey 19:19 12/11/2000 (0)
- Racing Dynamics front spoiler - LouisH 17:55 12/11/2000 (1)
  - http://www.racdyn-usa.com/ (nt) - JoeB 10:27 12/17/2000 (0)
- Re: WHAT BUMPER IS THIS ? NOT! - Paul (CapeCod) 15:27 12/11/2000 (0)
- Re: WHAT BUMPER IS THIS ? - JOHN S. 13:07 12/11/2000 (0)
- Re: WHAT BUMPER IS THIS ? - Glen 11:15 12/11/2000 (0)
- Re: WHAT BUMPER IS THIS ? - Tom Whaley 11:04 12/11/2000 (0)
6 pics (url) - Tom Whaley 09:41 12/11/2000 (2)
- Works for me...any others having probs? - Tom Whaley 15:47 12/12/2000 (0)
- Re: 6 pics - Didn't Load UP???? - Bimmerdude 09:36 12/12/2000 (0)
One wish 6er owners have for X'mas......? - Paul (CapeCod) 07:25 12/11/2000 (23)
- Everlasting tires!!! :) eom - Joe ///M 00:30 12/12/2000 (0)
- mini-Cold fusion power plant - j 23:03 12/11/2000 (0)
- Re: My new/used engine - lars cousineau 21:36 12/11/2000 (0)
- Re: The St Pauli Girl riding shotgun!!!! - PM 21:20 12/11/2000 (0)
- A Leica M6 to take picts of - dan n. 19:51 12/11/2000 (0)
- A wood dash kit and shift knob (nt) - D.R. Dickey 19:22 12/11/2000 (2)
  - Re: A wood dash kit and shift knob - JOHN S. 18:06 12/12/2000 (0)
  - wood, huh? - Joe ///M 00:29 12/12/2000 (0)
- Re: One wish 6er owners have for X'mas......? - DavidL 18:55 12/11/2000 (0)
- only some minor things - Usic 18:38 12/11/2000 (0)
- 17" M Parallel Rims and a M6 to put them on! - Marc 12:40 12/11/2000 (0)
- stuff - justin 12:04 12/11/2000 (0)
- New Imron paint job! - Mark Silva 10:58 12/11/2000 (3)
  - What kind of paint job is this? how much? - Glen 11:17 12/11/2000 (2)
    - Re: What kind of paint job is this? how much? - Craig McCall 20:39 12/11/2000 (1)
      - Re: What kind of paint job is this? how much? - Mark Silva 11:28 12/13/2000 (0)
- Camber plates & Yokohama AVS Sport 235/45/17 =) (nt) - Chris Morgan 10:51 12/11/2000 (0)
- The full Alpina treatment for my M635 (nt) - BobK2 10:35 12/11/2000 (0)
- Re: One wish 6er owners have for X'mas......? - JOHN S. 09:37 12/11/2000 (0)
- Re: One wish 6er owners have for X'mas......? - John 07:47 12/11/2000 (2)
  - I've got mine!!! - NIck 08:00 12/11/2000 (1)
    - Re: Cupholder - sixthreethree 09:42 12/11/2000 (0)
- Re: One wish 6er owners have for X'mas......? - Keith 07:40 12/11/2000 (0)
Re: Weber carbs??? - lars cousineau 03:22 12/11/2000 (0)

Questions, comments, or problems, please visit the Roadfly help desk.