Re: Easiest way to remove a cold start valve on 53 (archive)
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Posted by What kind of wrench? on January 15, 2001 at 12:24:14:
In Reply to: Re: Easiest way to remove a cold start valve on 53 posted by Steve Haygood on January 14, 2001 at 20:22:08:
(posted from: blv-proxy-01.boeing.com (12.13.226.11))
Steve,
Are you referring to a thin wall 10 mm socket or an open end wrench or ?
TerryIhave always left the intake on at my shop, use a high quality 10mm and preferably ahve acouple of diff makes on hand as the diff angles will come in handy as you get it to break lose
Follow Ups:
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]