Re: Need quick answer on front bearing install.... (archive)

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

Re: Need quick answer on front bearing install.... (archive)

[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]

Posted by Scottie on January 31, 2001 at 15:00:47:

In Reply to: Need quick answer on front bearing install.... posted by JamesM on January 31, 2001 at 14:28:43:

(posted from: (24.1.127.212))

James, tighten the bearings to a reasonable level and reinstall the rotor, caliper and wheel and lower the car to the ground so the weight is on the bearing. Tighten wheel bearing nut to 214 ft/lbs. Jack it back up and remove the wheel. Stake the collar into the nut. Apply LT 638 sealant to grease cap and knock it back into place.

Scottie

What size socket?? JamesM 15:45 1/31/2001 (0)
Thanks!! JamesM 15:08 1/31/2001 (0)

[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.

© 1997 - 2018 Jump Internet Inc. All rights reserved.