Posted by Mark.C on February 10, 2001 at 19:53:55:
(posted from: (203.96.159.17))
Anybody know the correct amount of travel there should be on the TPS before it switches. I currently have mine so it NC/NO as soon as there is any movement off idle at all. I’m wondering if it had say 1mm of travel before it indicated to the ECU off idle it might be smoother when you go closed throttle and on again at low speed in a high gear. Normally as the engine is effectively turned off on over run then back on again it might be smoother as it takes up the drive line slack.