The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Got a tilt wheel in my E28! (archive)
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Posted by Doug G on March 11, 2001 at 17:01:23:

I got tired of the upright steering wheel position (feel like I'm driving a Kenworth), so I installed a few (5) washers between the bolt that holds the steering column in place. This dropped the wheel by about 1 1/4".

I like the position MUCH better (personal preference), but I can't see much of the speedo or tach. If you want to do this yourself, all you need to do is:

1. remove the dash cover under the steering wheel and above the pedals (5(?) phillips screws)
2. Use a 13mm socket to remove the two bolts that hold the column in place
3. Replace those bolts with 25 or 30 mm long bolts and put a few washers in between to drop the wheel height.
4. put the dash cover back in place.

Anyone have a plexiglass steering wheel so I can tell how fast I'm going?

Doug

Follow Ups:


[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2008 Jump Internet Inc. All rights reserved.