The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: Valve clearance... (archive)
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Posted by Doug G on March 19, 2001 at 15:18:21:

In Reply to: Valve clearance... posted by JamesM on March 19, 2001 at 15:04:49:

My Bently manual shows 0.12/0.14 for cold/warm engine (3.5L). Same specs for intake/exhaust. Are your specs for the 528e, or are there two specs out there?

Thanks


Spec valve clearance is 0.010" intake and 0.012" exhaust, engine stone cold. Many will gap all to 0.012" or 0.012" in/0.014" ex to smooth the idle. This may cause more valvetrain noise than one gapped to spec.

Recheck the valve clearance. It takes a few times to get it exactly right. You may find that one or two are a little out of spec. The car does this out of spite.




Follow Ups:


[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2009 Jump Internet Inc. All rights reserved.