Re: Plastic in Oil Pan (archive)
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Posted by Rob Anderson on March 25, 2001 at 02:16:55:
In Reply to: Plastic in Oil Pan posted by Mauro on March 25, 2001 at 00:43:25:
(posted from: 219.raleigh-01-02rs16rt.nc.dial-access.att.net (12.77.64.219))
I take it you have an M30. I would suggest replacing them pronto. The reason why is that if it is the guard it is not too bad, but that means that the tensioner is also probably worn and if you have a worn or broken tensioner then you will end up wrecking the motor eventually. To replace bolt of these parts you have to take off bolt the upper and lower timing chain cover. This is not an easy job, but it can be done by an experienced DIYer. Don't forget to replace all the gaskets.Rob
M535i SIG Chief Technical Advisor
www.m535i.org
Follow Ups:
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]