The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Thanks, Rob. (eom) (archive)
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Posted by sam smith on March 26, 2001 at 00:03:54:

In Reply to: Re: what tools needed to pull fuel rail, injectors posted by Rob Anderson on March 26, 2001 at 00:00:32:


You will need 10mm combination wrench, flat head screw driver for the hose clamp. 10mm deep socket, 10mm regular socket, medium and long length extension, you will also need a long flat head screw driver or a pry bar to pop the rail off. I would also suggest that you use a very small screw driver to remove the injector electrical connectors. BE VERY CAREFUL WHEN REMOVING THEM because they break easily.

Rob
M535i SIG Chief Technical Advisor
www.m535i.org


Hi,

Am going to pull the injectors in a couple days to have them sent out and cleaned/blueprinted. As I'm at school, I had to leave all my tools at home - but as a favor, mom and dad are going to send me what I need out of my toolbox to do this since I can't make it home (4 hr drive) soon enough.

What are the sizes and types (tall/short,etc) of sockets needed to pull the rail in addition to whatever else is in the way? Anything else I should know? Any other tools needed?

Thanks

Sam
who's never done this before seeing as his tii never needed it, and the '76 '02 had a weber 38/38 on it...





Follow Ups:


[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2009 Jump Internet Inc. All rights reserved.