The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: electric anttena cover (archive)
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Posted by Dave in Dallas on June 17, 2001 at 04:23:44:

In Reply to: electric anttena cover posted by greg on June 16, 2001 at 20:34:40:

Greg, I found this description on Big6 (e24) tech site. I need to do this this weekend as well, so thought I'd pass it on. This was contributed by Jeff Schnellinger:

"The antenna case has a plastic cover with 8 or 10 "barbed" tabs that snap into slots in the base. Put the antenna on it's side. Place a large flat bladed screw driver vertically into the groove between the case and the cover. With a twisting motion apply a *slight* amount of pressure and hold. Insert a second, smaller screw driver into a slot holding the one of the "barbed" tabs. By applying a twisting motion, pressure is applied simultaneously down on the tab and up on the case. This should allow the "barbed" tab to pop out of the slot. While holding the pressure on the first screw driver, continue around the case with the second."

Let us know how things work out for you.

Dave



how do you remove the cover from the anttena motor on a 535is. thanks




Follow Ups:


[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2009 Jump Internet Inc. All rights reserved.