The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: Blower motor update (archive)
[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Posted by John Banner on August 26, 2001 at 13:56:38:

In Reply to: Blower motor update posted by John Banner on August 26, 2001 at 12:37:55:


Hello all here is a up date please help i'm getting voltage to the plug for the ac blower motor but when i turn on motor i get nothing. i hooked 12 volts directly to the motor and the motor spins what else should i look for? Thanks in advance ~JOHN BANNER~ in florida where its hot and ac is broke :(

i dont remember the exact colors but with ignition switch on and ac switch pushed in there is 12 volts where you plug the ac blower motor in on the side of the box this is where the other three plugs are could it be a resistor? the fresh air blower does work i have no way of telling how much hte blower motor is drawing of of the 12 volt source when i hook it directly to it. i did try starting the car, turning on the ac and hooking the blower motor directly to 12 volts and very little air was blowing out of the vents but the ait that was comeing out was cold! this is on a 87 528e Thanks ~JOHN BANNER~

Follow Ups:


[ Follow Ups ] [ 5-series (E28) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2009 Jump Internet Inc. All rights reserved.