bimmer.org forums: BMW 5-series (E28) Forum Archive, 2001 week 38

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW 5-series (E28) Forum Archive, 2001 week 38
The bimmer.org E28 Forum exists to provide all 1982-1988 BMW E28 5-series owners and enthusiasts an open forum to discuss this series of BMWs.

Search Archives

NEED MORE POWER - Steve 23:28 9/23/2001 (8)
- Re: NEED MORE POWER - Paul 21:48 9/24/2001 (0)
- Re: NEED MORE POWER - TJ '82 528e 18:04 9/24/2001 (0)
- Re: NEED MORE POWER - Geoff 16:27 9/24/2001 (0)
- Re: NEED MORE POWER - Dave S. 12:24 9/24/2001 (1)
  - Re: NEED MORE POWER - andyman 20:10 9/24/2001 (0)
- Re: NEED MORE POWER (url) - Michael Fennell 12:12 9/24/2001 (0)
- Turbos help! - RussC 12:02 9/24/2001 (0)
- Chip helps - five two eight 01:48 9/24/2001 (0)
3.28 limited slip and driveshaft for sale - Gregory Mierz 23:18 9/23/2001 (1)
- 3.28? Could it be 3.25? (nt) - Dave in Dallas 07:43 9/24/2001 (0)
e28 sightings on tv - Matt 22:33 9/23/2001 (7)
- Splash! Great e28 semi-race scene! (nt) - Jonathan Pecsok 08:08 9/25/2001 (0)
- Don't forget Splash! Great e28 semi race scene! - Jonathan Pecsok 08:07 9/25/2001 (0)
- Don't forget Splash! Great e28 semi race scene! (nt) - Jonathan Pecsok 08:07 9/25/2001 (0)
- Get a copy of "Peacemaker" LOTS of E28 footage (nt) - Dave S. 07:06 9/24/2001 (0)
- beat up old euro e12 in snatch!(nt) - bryan 06:04 9/24/2001 (0)
- The new Chevy Avalanche commercial also has an E28 (nt) - Tony-Without a 5er for now-Phoenix, AZ. 23:48 9/23/2001 (1)
  - Because Chevy's going to an inline six?? Hmmm... - Rich from Philly 08:47 9/24/2001 (0)
HELP I need info for a paper - Josh Richard 20:45 9/23/2001 (3)
- Re: HELP I need info for a paper - andyman 20:13 9/24/2001 (0)
- Re: HELP I need info for a paper - tomc 11:59 9/24/2001 (0)
- Depends on Condition of the Parts. - 85 Dave 07:02 9/24/2001 (0)
FS: Bosch Idle Control Valve for 535i and 535is - Victor Trucco 20:12 9/23/2001 (0)
Where is the service engine resetter at. - Steve 20:03 9/23/2001 (2)
- reset SI lights - 15pin connector - Steve - the one in Knoxville 08:34 9/24/2001 (0)
- Re: Where is the service engine resetter at. - Dr. Worn Bushings III 20:31 9/23/2001 (0)
How do I reset the Oxygen Sensor Light - Steve 20:01 9/23/2001 (4)
- Remove driver's kick panel... - RonW 20:42 9/23/2001 (3)
  - What the heck? - Greg 08:17 9/24/2001 (2)
    - If it is the "reminder"... (m) - John (SoCal desert) 12:11 9/24/2001 (0)
    - I think that's the box, but fuse is your problem. - RonW 11:49 9/24/2001 (0)
Wont start in the morning, cold start is shooting - Steve 19:56 9/23/2001 (1)
- when was the last tune up..wires, cap,rotor?nt - Dave Hunt 22:00 9/23/2001 (0)
Water pump leaking - Steve 19:52 9/23/2001 (1)
- Re: Water pump leaking - Bob 09:26 9/24/2001 (0)
Blowing fuse 12 when I hit the brake..... - Doctor Detroit 19:03 9/23/2001 (3)
- Re: Blowing fuse 12 when I hit the brake..... - Joe in NJ 13:25 9/24/2001 (0)
- Re: Blowing fuse 12 when I hit the brake..... - Jbelton 00:05 9/24/2001 (1)
  - stock radio, not aftermarket (eom) - Doctor Detroit 09:29 9/24/2001 (0)
Just some questions and comments - joe 18:51 9/23/2001 (0)
F/S: Chrome Head Lt. Shields (set of 4) (pic) - Steve 17:38 9/23/2001 (3)
- sold (nt) - Steve 21:40 9/23/2001 (0)
- sold (nt) - Steve 21:40 9/23/2001 (0)
- Are you into vinyl rooves and opera lights, too? (nt) - Fimum Fit 18:10 9/23/2001 (0)
Rear window won't roll back up - Clark Gilbert 17:35 9/23/2001 (13)
- Re: Rear window won't roll back up - JMGitlin 17:40 9/24/2001 (0)
- Re: Rear window won't roll back up - more info - Clark Gilbert 22:09 9/23/2001 (2)
  - You are going to have to disassemble - Phaedrus 15:48 9/24/2001 (1)
    - Nope - its the wires in the hinge area - Clark Gilbert 16:54 9/25/2001 (0)
- Re: Rear window won't roll back up - Dan B 20:03 9/23/2001 (0)
- Re: Rear window won't roll back up - rexmo 19:13 9/23/2001 (0)
- Do you hear the motor running? (nt) - Brad Couvillon 18:00 9/23/2001 (6)
  - No. No motor running. - Clark Gilbert 21:02 9/23/2001 (5)
    - Then. . . (url) - Brad Couvillon 21:23 9/23/2001 (4)
      - Agreed... - Phaedrus 08:27 9/24/2001 (3)
        
        glass to metal glue? - teak 11:50 9/24/2001 (1)
        
        Try Here for the proper glue (url) - Phaedrus 15:47 9/24/2001 (0)
        
        Re: Agreed... - Clark Gilbert 10:07 9/24/2001 (0)
Someone explain 528e vs 535i springs, please (url) - Brad Couvillon 17:10 9/23/2001 (6)
- Springs, explained...again... (url) - Chris Graff 21:07 9/23/2001 (3)
  - Re: Springs, explained...again... (url) - Brad Couvillon 21:34 9/23/2001 (2)
    - Re: Springs, explained...again... - Chris Graff 07:26 9/24/2001 (1)
      - Re: Springs, explained...again... (url) - Brad Couvillon 15:58 9/24/2001 (0)
- Re: Someone explain 528e vs 535i springs, please (url) (pic) - Wes 17:43 9/23/2001 (1)
  - LoL how do you expect me to look at your car. . . (url) - Brad Couvillon 18:09 9/23/2001 (0)
Anyone have any info on sachs springs and shocks ? - Eddie 17:06 9/23/2001 (0)
FS 3.73 limited slip differential - shermanmartinez 17:02 9/23/2001 (0)
(What looks like) NICE '86 535i on eBay for $785!! (url) - Brad Couvillon 16:29 9/23/2001 (5)
- maybe rusty i,ll try to take a look (url) - BSAndy 533ia 22:27 9/24/2001 (0)
- Re: (What looks like) NICE '86 535i on eBay for $7 (url) - charles 20:40 9/23/2001 (1)
  - Re: (What looks like) NICE '86 535i on eBay for $7 (url) - Brad Couvillon 21:45 9/23/2001 (0)
- BTW, here's the link (url) (nt) - Brad Couvillon 18:10 9/23/2001 (1)
  - For a good dealer on BMWs on EBay. . . - eurotrash 00:23 9/24/2001 (0)
Anyone See The E28 In The Chevy Commercial ??? (nt) - Tom 16:27 9/23/2001 (4)
- THEY SHOULD CALL IT BEAUTY AND THE FREAK! - bryan 20:59 9/23/2001 (0)
- Mo too! - funfer 19:14 9/23/2001 (1)
  - Who's Mo? (nt) - Brad Couvillon 21:48 9/23/2001 (0)
- I DID - Dan Younes 17:59 9/23/2001 (0)
wheel and tires - Mark 16:13 9/23/2001 (1)
- Re: wheel and tires - Mike 19:21 9/23/2001 (0)
Saw a nice 528e at White Hen - John 15:48 9/23/2001 (1)
- What about the nice 535iS at Greenview and Pratt? - eurotrash 16:27 9/23/2001 (0)
NEW dash is in car!! (url) (pic) - Duke 15:11 9/23/2001 (4)
- I'll be there, but my new dash still waits, photo (url) - tim atl. 13:54 9/24/2001 (0)
- You won't beat me in the concours! - Shawn D. 06:35 9/24/2001 (0)
- Re: NEW dash is in car!! - Todd Kenyon 15:59 9/23/2001 (1)
  - Hey Todd, short time was due to you...Thanks!!! - Duke 17:05 9/23/2001 (0)
WTB Steering Wheel - Walt 14:29 9/23/2001 (0)
Power Steering goes, then power brakes, leaking - Jim T. 14:26 9/23/2001 (1)
- PS pump or brake booster - Bob Sutterfield 14:40 9/23/2001 (0)
Pics finally!! (url) (pic) - GF 13:56 9/23/2001 (4)
- Nice! - Rich from Philly 08:54 9/24/2001 (0)
- Here is mine with tint and 17" wheels (pic) - Artie 06:51 9/24/2001 (0)
- Re: Pics finally!! - dlatour 14:59 9/23/2001 (1)
  - Re: Pics finally!! - GF 20:47 9/23/2001 (0)
new 528e owner - Michael Fennell 12:34 9/23/2001 (0)
A few things of note on eBay. . . (url) - Brad Couvillon 11:40 9/23/2001 (0)
Virus activity increasing........ Protection? - Lars PNW 81_528i 11:32 9/23/2001 (5)
- A 2nd opinion - TJ '82 528e 14:28 9/23/2001 (0)
- had a hell of a time cleaning my office computer - craigwatanabe 13:33 9/23/2001 (2)
  - yes do not open any email with a readme.exe - craigwatanabe 13:36 9/23/2001 (0)
  - yes do not open any email with a readme.exe - craigwatanabe 13:35 9/23/2001 (0)
- You are correct. - John (SoCal desert) 12:36 9/23/2001 (0)
black window moulding on lachssilber car? - Bob Sutterfield 10:13 9/23/2001 (2)
- I've seen one (m)... - John (SoCal desert) 18:59 9/23/2001 (1)
  - The magazine article is. . . - John (SoCal desert) 21:19 9/23/2001 (0)
Clutch - Works 1 day, Doesn't The Next - @#$%& - Patrick 09:47 9/23/2001 (2)
- master and slave cly. - AL 11:50 9/23/2001 (1)
  - Re: master and slave cly. - bmw's forever 10:36 9/24/2001 (0)
Garage sale of parts. (url) - TCD 09:29 9/23/2001 (0)
Hard start question - Alpinaguy 07:54 9/23/2001 (1)
- Check wiring and switches first - Chris R '87 535iS 08:00 9/23/2001 (0)
Thanks Brad C. for your info on extra tailight! - Ron in SF 00:29 9/23/2001 (10)
- How about as a brake light? - craigwatanabe 13:47 9/23/2001 (6)
  - Don't know if this is what you want, but. . . - Kitster, Boise ID 533i 10:55 9/24/2001 (0)
  - Make sure brake switch can take the current... - RonW 15:06 9/23/2001 (2)
    - Re: Make sure brake switch can take the current... - Bob Sutterfield 18:03 9/23/2001 (0)
    - Unless the radio's on a whole new circuit (url) - Brad Couvillon 16:50 9/23/2001 (0)
  - Re: How about as a brake light? - Bob Sutterfield 14:36 9/23/2001 (0)
  - Re: How about as a brake light? (url) - Brad Couvillon 13:59 9/23/2001 (0)
- Re: Thanks Brad C. for your info on extra tailight - Jbelton 05:16 9/23/2001 (1)
  - I bet I know why. . . (url) - Brad Couvillon 11:26 9/23/2001 (0)
- Glad it worked! BTW, Bob Sutterfield. . . (url) - Brad Couvillon 02:15 9/23/2001 (0)
To the owner of the blue 87 iS - Lou 00:02 9/23/2001 (3)
- That was me... Darin S. Check your email (NT) - Darin S. 19:28 9/24/2001 (0)
- Hey Lou, Introduce Yourself.. Whatcha driving? - Tim In PA 06:40 9/23/2001 (1)
  - Re: Hey Lou, Introduce Yourself.. Whatcha driving? - Lou 21:37 9/24/2001 (0)
Funny Post From The E9 Board (url) - Tim In PA 23:34 9/22/2001 (1)
- LoL We can't make too much fun, though. . . (url) - Brad Couvillon 02:21 9/23/2001 (0)
e28 on TLC just now! (url) - Brad Couvillon 23:23 9/22/2001 (1)
- e28 in new Chevy Avalainch add on tv! (nt) - Erik 23:59 9/22/2001 (0)
What's this extra plug for in my '83 533i? - JeffreyOlson 23:13 9/22/2001 (0)
ICV Test question (long...) - Jan R. 23:12 9/22/2001 (1)
- This problem screams: COLD START INJECTOR! imho - eurotrash 13:30 9/23/2001 (0)
Brake upgrade - Anthony 23:05 9/22/2001 (2)
- Re: Brake upgrade - Chris R '87 535iS 07:54 9/23/2001 (0)
- Re: Brake upgrade - Tim In PA 23:24 9/22/2001 (0)
535is suspension question - Anthony 21:58 9/22/2001 (2)
- If you want... - Bob 11:35 9/23/2001 (0)
- try this... (url) - Chris Altman 22:39 9/22/2001 (0)
How do I adjust an AFM to maker my car run leaner? - Thomas H. Bratcher 21:32 9/22/2001 (3)
- Clockwise is tighter spring = leaner, Counter... - Dave in Dallas 22:46 9/22/2001 (2)
  - Won't the O2 sensor negate anything you do w/ AFM? (url) - RonW 23:39 9/22/2001 (1)
    - Re: Won't the O2 sensor negate anything you do w/ - Bob 11:39 9/23/2001 (0)
Good prices for parts (url) - Jerry Trawell 21:25 9/22/2001 (0)
Lateral play on input shaft of 260/6 more please - Fisher 21:12 9/22/2001 (1)
- I think that amount of play is OK - Devinder 22:04 9/22/2001 (0)
FS - high mount center brake light by Hella - Scottie 85 535i San Jose 20:47 9/22/2001 (0)
exhaust manifold studs missing - how screwed am I? - Todd Kenyon 20:15 9/22/2001 (3)
- Re: exhaust manifold studs missing - how screwed a - Dan B 21:27 9/22/2001 (0)
- Same problem, not for BMW though - TD 21:19 9/22/2001 (0)
- Re: exhaust manifold studs missing - how screwed a - Todd Kenyon 20:29 9/22/2001 (0)
100 miles on new odometer and it broke! - Dan Younes 19:47 9/22/2001 (7)
- Hey Paul or Matt @Maximillian, can U guys get... - Dave in Dallas 23:00 9/22/2001 (0)
- Resetting to 000 while moving??? - Lars PNW 82_528e 22:15 9/22/2001 (4)
  - Are y'all sure it crunches the gears? Because. . . (url) - Brad Couvillon 16:55 9/23/2001 (1)
    - Hundreds of times? No- just once. (url) - RonW 19:08 9/23/2001 (0)
  - Re: I crunched my odo gears this way (nt) - Rich '83 533i Hou Tx 05:17 9/23/2001 (0)
  - Word Up Lars! Resetting while moving = crunched.. - Dave in Dallas 22:58 9/22/2001 (0)
- Re: 100 miles on new odometer and it broke! - Bob 21:07 9/22/2001 (0)
100 miles on new odometer and it broke! - Dan Younes 19:47 9/22/2001 (1)
- Odometers are notorious... (url) - RonW 21:36 9/22/2001 (0)
CANT FIND WHERE THE A/c VACCUM HoSE GOES - Dan Younes 19:45 9/22/2001 (1)
- Re: CANT FIND WHERE THE A/c VACCUM HoSE GOES - RonW 21:16 9/22/2001 (0)
need an is - K lucht 19:00 9/22/2001 (1)
- Re: need an is - Mark 20:42 9/22/2001 (0)
Carfax request - OB in VA 18:01 9/22/2001 (0)
Parts I still wish to sell..... - funfer 17:09 9/22/2001 (3)
- Bentley too....$25 (nt) - funfer 17:11 9/22/2001 (2)
  - Sold....... - funfer 21:16 9/22/2001 (0)
  - Please check your e-mail (eom) - Raj 17:20 9/22/2001 (0)
Roof rack wanted for E-28 - donpeak 17:08 9/22/2001 (0)
NON AIR BAG CHECK BOARD ON EBAY - AL 17:03 9/22/2001 (0)
Adjusting AFM after installing Mustang Injectors? - tim atl. 16:26 9/22/2001 (2)
- Tim, I installed the Stang injectors and it did... - Dave in Dallas 23:14 9/22/2001 (1)
  - I also did a full top end rebuild too. So I... - Dave in Dallas 23:22 9/22/2001 (0)
car has been stored for 3 months, put battery in - Chris '83 533i, '85 535i, '84 745i 15:51 9/22/2001 (3)
- Re: car has been stored for 3 months, put battery - a 16:14 9/22/2001 (2)
  - Re: car has been stored for 3 months, put battery - Chris '83 533i, '85 535i, '84 745i 18:16 9/22/2001 (1)
    - Sneaky trick to get you going... - RonW 21:08 9/22/2001 (0)
Whoa! 3.73 in auto is da bomb! (more) - Ken M 13:17 9/22/2001 (4)
- Put 3.91 in my 6er automatic. . . - LarryM 02:06 9/23/2001 (1)
  - My error; 3.45 was stock in 6 series (more) - Ken M 14:45 9/23/2001 (0)
- Yep Ken, it's the best thing I've done for my 5er! - Dave in Dallas 23:05 9/22/2001 (1)
  - I agree; it completely transforms the car (!) - Ken M 14:46 9/23/2001 (0)
How do I remove the windshield sprayers from hood? - Tim In PA 10:07 9/22/2001 (2)
- Re: How do I remove the windshield sprayers from h - Greg 14:48 9/22/2001 (0)
- Re: How do I remove the windshield sprayers from h - CliffB 10:21 9/22/2001 (0)
Any advice on intermittent temp guage 85 528e? - CliffB 09:50 9/22/2001 (1)
- archives mention a lot about - David Hunt 13:20 9/22/2001 (0)
anyone going to crane estate this sun? - a 08:45 9/22/2001 (0)
NY NJ CT,No cat state inp PASS any one?? - Dan B 07:38 9/22/2001 (5)
- Any muffler shop... - Bob 21:10 9/22/2001 (0)
- Re: NY NJ CT,No cat state inp PASS any one?? - Ed 08:57 9/22/2001 (1)
  - My Cat was hollowed out on my Audi 20V Coupe. - Tim In PA 10:04 9/22/2001 (0)
- Re: NY NJ CT,No cat state inp PASS any one?? - a 08:30 9/22/2001 (1)
  - Not only that, CO's will be way too high.Wont pass - Tim In PA 08:51 9/22/2001 (0)
Used ECUs - MrMotronic 02:05 9/22/2001 (0)
Drive to Laguna Seca Video is back!!! (url) - jay 01:02 9/22/2001 (1)
- Re: Drive to Laguna Seca Video is back!!! - Drew 04:30 9/22/2001 (0)
FRONT SPOILER (535is) on eBay! CHEAP! (url) - JeffreyOlson 23:26 9/21/2001 (0)
533i STEERING WHEEL on eBay. Fits others, too... (url) - JeffreyOlson 23:23 9/21/2001 (0)
Massive fuel leak under the hood - Scott M 22:36 9/21/2001 (2)
- Re: Massive fuel leak under the hood - a 09:05 9/22/2001 (0)
- Re: Massive fuel leak under the hood - rexmo 07:47 9/22/2001 (0)
Help! What size piston bore for 535i? - Josh Cook 22:00 9/21/2001 (0)
Tips/tricks/sequence for pulling center console - Mike 21:51 9/21/2001 (4)
- Re: Tips/tricks/sequence for pulling center consol - Todd Kenyon 21:21 9/22/2001 (1)
  - Re: Tips/tricks/sequence for pulling center consol - Mike 21:55 9/22/2001 (0)
- Re: Tips/tricks/sequence for pulling center consol - Rod 23:35 9/21/2001 (1)
  - Re: Tips/tricks/sequence for pulling center consol - Mike 23:44 9/21/2001 (0)
Fuse - Fred Nurnberger 21:25 9/21/2001 (0)
has anyone bought head at www.alloembmwparts.com - Todd Q., 88 535i 19:11 9/21/2001 (2)
- Brand New Head FS - Dana R 19:47 9/21/2001 (1)
  - Dana - check your email. TQ. - Todd Q., 88 535i 20:57 9/21/2001 (0)
Wheel and Brembo Sale! Prices inside: (url) - Eric @ SPP 19:00 9/21/2001 (0)
Need suggestions please!!! - Thomas H. Bratcher 18:20 9/21/2001 (1)
- Re: Need suggestions please!!! - rexmo 21:14 9/21/2001 (0)
Anyone have a used windshield in Utah FS - Craig Day 18:01 9/21/2001 (0)
87 528e for sale... - ///MBaller 17:00 9/21/2001 (1)
- Re: 87 528e for sale... - wavell 19:49 9/21/2001 (0)
Big brake ??? re: Raj's post farther down. - Kitster, Boise ID 533i 16:40 9/21/2001 (5)
- Another Problem? - Phadrus 16:41 9/22/2001 (0)
- Re: Big brake ??? re: Raj's post farther down. (url) - Bob Sutterfield 22:51 9/21/2001 (2)
  - Can I install it under TRX's? - Chip Maxwell 01:34 9/22/2001 (1)
    - yes, but why? - Devinder 13:57 9/22/2001 (0)
- Cool 'em! - Eddie Kielbon 17:11 9/21/2001 (0)
3.73LSD for sale NO aff.! (url) (nt) - jay 16:20 9/21/2001 (2)
- I have a 3.73 non-LS for sale, CHEAP. Please take - this, someone! Brian 17:27 9/21/2001 (1)
  - Re: I have a 3.73 non-LS for sale, CHEAP. Please t - Lou 22:42 9/22/2001 (0)
WHEEL BEARING? HUMMING? - Dan Younes 15:45 9/21/2001 (2)
- Re: WHEEL BEARING? HUMMING? - a 18:00 9/21/2001 (0)
- let your fingers do the walking - charlie 17:52 9/21/2001 (0)
Will wheels off a 94 318i fit an 85 528e? - TheSynic 15:27 9/21/2001 (1)
- Re: Will wheels off a 94 318i fit an 85 528e? - Markus 13:37 9/24/2001 (0)
WTB - HARTGE valve cover for M30 engine. - Duke 15:14 9/21/2001 (0)
$$$ FOR SALE - Robert 13:07 9/21/2001 (6)
- robert, pls check your email or email me. thanks. - james 17:35 9/23/2001 (0)
- is that 210 hp at the rear wheels? - james 21:46 9/21/2001 (2)
  - Not if that was a stock rebuild... - Phadrus 16:46 9/22/2001 (1)
    - What gear should E28 be dyno'd with? - RussC 12:14 9/24/2001 (0)
- Where ya at, buddy? (nt) - g 13:31 9/21/2001 (1)
  - Re: Where ya at, buddy? - Robert 14:07 9/21/2001 (0)
Re: Holy TWIN TURBOS Batman!!!!.. - RussC 12:42 9/21/2001 (2)
- Re: Holy TWIN TURBOS Batman!!!!.. - TCD 13:02 9/21/2001 (1)
  - Re: Holy TWIN TURBOS Batman!!!!.. (url) - Randall 08:00 9/22/2001 (0)
Anyone rewire power to radio using cigar...... - Doctor Detroit 12:12 9/21/2001 (1)
- Blowing fuse 12 everytime not fuse 5 (eom) (nt) - Doctor Detroit 14:22 9/21/2001 (0)
Joe Rexroat, please read (url) - Brad Couvillon 11:41 9/21/2001 (1)
- Nevermind. It went through this time (nt) - Brad Couvillon 11:42 9/21/2001 (0)
Starter wires - Tom 11:22 9/21/2001 (2)
- Re: Starter wires - ScottJ 12:59 9/21/2001 (1)
  - Re: Starter wires - Tom 14:34 9/21/2001 (0)
wings for E28??? - Robert 10:44 9/21/2001 (3)
- Re: wings for E28??? (url) (pic) - Tr Tetreault 20:39 9/22/2001 (0)
- Non-adjustable Zender @ Bavauto (url) (pic) - Chuck 12:03 9/21/2001 (0)
- Re:Hartge used to make a wing, but it (m) - Rich '83 533i Hou Tx 11:14 9/21/2001 (0)
Very Interesting-Not really BMW related - Richard O 10:18 9/21/2001 (10)
- Type random caps in Wingdings font... - RonW 19:14 9/21/2001 (0)
- Re:Coincidence or Not ?? Makes one wonder (nt) - Richard '83 533i Houston Tejas 10:34 9/21/2001 (8)
  - No, not at all.... - Greg 10:47 9/21/2001 (7)
    - Re: No, not at all.... - Richard O 17:36 9/21/2001 (0)
    - sorry didn't mean to imply.... - Greg 10:49 9/21/2001 (5)
      - Factoid: "gullible" isn't in the dictionary! (eom) - Shawn D. 19:58 9/21/2001 (2)
        
        You sure? Wait here, let me go check . . . I'll be - right back. Brian 00:22 9/22/2001 (0)
        
        It's NOT?!!! (url) - Brad Couvillon 22:27 9/21/2001 (0)
      - Re:That's OK, I think the orig msg (more) - Richard '83 533i Houston Tejas 11:09 9/21/2001 (1)
        
        Re:That's OK, I think the orig msg (more) - Bob Kegel 16:56 9/21/2001 (0)
*Minnesota BMW Meet: Sept 29th* (url) (pic) (nt) - Samson 10:15 9/21/2001 (0)
Public Thanks to Paul @ Maximillian - Lexington KY 528e 09:57 9/21/2001 (1)
- I've gotten excellent service from him too... (nt) - Mario 22:02 9/21/2001 (0)
FS 1986 535i northeast PA - tomdavisDOTcom 09:31 9/21/2001 (0)
535is front spoiler - Michael 09:06 9/21/2001 (0)
Pulley keeps cutting rad hose - Chris Hennessey 08:48 9/21/2001 (3)
- Re: If your motormounts are good check (more) - Richard '83 533i Houston Tejas 10:22 9/21/2001 (0)
- Re: Pulley keeps cutting rad hose - ScottJ 09:37 9/21/2001 (0)
- replace engine mounts? (nt) - Bob Sutterfield 08:51 9/21/2001 (0)
NE Philly Gentleman with the 3 parts E28es that - Rich from Philly 08:30 9/21/2001 (0)
AC making whirling sound...stumped! - funfer 08:13 9/21/2001 (6)
- Sorry found old post....nt - funfer 08:23 9/21/2001 (5)
  - Re: Sorry found old post....nt - Dave in Dallas 13:48 9/21/2001 (2)
    - Oops. Can U share with all? Thanks! (nt) - Dave in Dallas 13:49 9/21/2001 (1)
      - Do you have this deal too? - funfer 15:56 9/21/2001 (0)
  - Can you email & enlighten me? Same problem here. (nt) - Chris R '87 535iS 09:28 9/21/2001 (1)
    - Here's the link.... (url) - funfer 15:55 9/21/2001 (0)
Anyone help identify these part #'s want to sell - tim atl. 08:04 9/21/2001 (0)
how many have pinstripes? (plus more ???'s) - Paul Schnettler 07:38 9/21/2001 (22)
- Double Silver on Zinnober 528i - Alpinaman 07:49 9/25/2001 (0)
- Double Silver on Zinnober 528i - Alpinaman 07:48 9/25/2001 (0)
- Jet Black with Red and Pearl stripe (nt) - Anthony 20:45 9/22/2001 (0)
- Removed mine: Were burgandy on white - Jimbo/CO 18:49 9/22/2001 (0)
- MikeC's idea lead to a dented hood.. - Jerrard Holland 17:09 9/22/2001 (0)
- Re: how many have pinstripes? (plus more ???'s) - Rod 23:40 9/21/2001 (2)
  - John, Isn't yours Maroon and Charcoal as well?? - Tim In PA 10:18 9/22/2001 (1)
    - Probably, I described it as fushia and gray. (m) - John (SoCal desert) 12:54 9/22/2001 (0)
- Unoriginal Desicration - MikeC 23:32 9/21/2001 (2)
  - Check the ETK...... - Oz, 85 528i 15:41 9/22/2001 (0)
  - I think if you'll look at these posts. . . (m) - John (SoCal desert) 01:07 9/22/2001 (0)
- black pinstripes on my 86 535i (nt) - craigwatanabe 23:00 9/21/2001 (1)
  - Bronzit Beige (nt) - craigwatanabe 23:00 9/21/2001 (0)
- Two-tone pinstripes on my Lachsilber 535is. . .(m) - John (SoCal desert) 20:23 9/21/2001 (0)
- Re: how many have pinstripes? (plus more ???'s) - Jerrard Holland 18:38 9/21/2001 (0)
- Re: how many have pinstripes? (plus more ???'s) - TJ '82 528e 17:38 9/21/2001 (0)
- Re: how many have pinstripes? (plus more ???'s) - JimC 15:46 9/21/2001 (0)
- Gold dbl pinstripe on Diamond Black - Dave S. 12:39 9/21/2001 (0)
- Re: how many have pinstripes? (plus more ???'s) - jay 10:06 9/21/2001 (0)
- Mine came with ///M tricolor pinstripes (on black) - Chris R '87 535iS 09:31 9/21/2001 (0)
- Re: how many have pinstripes? (plus more ???'s) - rex 08:53 9/21/2001 (0)
- red/black pinstripes on my Red E28... - Doug G 08:24 9/21/2001 (0)
Easy subwoofer solution - Dave S. 07:23 9/21/2001 (3)
- More info please - Greg 08:42 9/23/2001 (0)
- THANK YOU!!! (More) - Mario 22:08 9/21/2001 (1)
  - ditto! - John (SoCal desert) 12:56 9/22/2001 (0)
Rear Power Windows Won't Work - Chris 06:55 9/21/2001 (3)
- Re: Rear Power Windows Won't Work - Steve 13:40 9/21/2001 (0)
- Check position of the rear window lockout switch - Shawn D. 07:37 9/21/2001 (0)
- Re: Rear Power Windows Won't Work - Dave S. 07:13 9/21/2001 (0)
Needed M535 tow hook cover - Scott P. 06:49 9/21/2001 (0)
Need new muffler, where to get best price,528e.EOM (nt) - Claudio Insaurralde 01:25 9/21/2001 (1)
- I got one from Steve Haygood on this board - adrianinflorida 09:18 9/21/2001 (0)
Big brake upgrade questions - Raj 01:18 9/21/2001 (4)
- Re: Raj, Here's a link to Richard Nott's (more) - Richard '83 533i Houston Tejas 10:31 9/21/2001 (0)
- Re: Big brake upgrade questions - Phaedrus 08:48 9/21/2001 (1)
  - Re: Big brake upgrade questions - Ed 09:00 9/21/2001 (0)
- Re: Raj, Here's what Rob ANderson has @ - Richard '83 533i Houston Tejas 06:29 9/21/2001 (0)
FS: BMW trinkets. silly small stuff. (pic) - Tony-Without a 5er for now-Phoenix, AZ. 00:36 9/21/2001 (0)
'92 525i wheels w/tires on ebay (nt) - good samaritan 23:06 9/20/2001 (0)
Still fighting Tricky Idle Problem 88 528e - James 22:53 9/20/2001 (1)
- heck, try pulling the instrument cluster and - TJ '82 528e 17:46 9/21/2001 (0)
hesitation while accelerating - Nick D 22:50 9/20/2001 (4)
- Re: Also check - Greg 20:17 9/24/2001 (0)
- Try running open loop - Raj 23:48 9/20/2001 (2)
  - Hey! I'm callin' the Denver Eco-Nazi's! (nt) - O2BNM5 :) 17:45 9/23/2001 (0)
  - This worked for me... - Doug G 08:26 9/21/2001 (0)
Recommend Mechanics in Long Island - BimmerLover 22:04 9/20/2001 (0)
533i - tips on replacing timing chain gaskets - John Langenfelder 21:25 9/20/2001 (1)
- Re: 533i - tips on replacing timing chain gaskets - ScottJ 09:48 9/21/2001 (0)
Off Topic....I hope you appreciate like I do!!!... (url) - Mark Seiferth Oo=00=oO (Seattle) 21:19 9/20/2001 (10)
- I'm getting a blank page at work AND home (eom) - Shawn D. 18:39 9/21/2001 (3)
  - Try using Internet Explorer instead of Netscape (nt) - RonW 18:49 9/21/2001 (2)
    - I don't do IE (not that there's anything wrong w/ - that) (more) Shawn D. 20:03 9/21/2001 (1)
      - If you use Netscape, try this link instead: (url) - RonW 20:09 9/21/2001 (0)
- Nice memories-God Bless you for sharing them (nt) - weaver535i 12:04 9/21/2001 (0)
- Re:Thanks, I forwarded your homesite to everyone I - charles 08:16 9/21/2001 (0)
- Thank you, Mark...very well done (NT) - Tim G. in Central Jersey 05:47 9/21/2001 (0)
- Re: Off Topic....I hope you appreciate like I do!! - adrianinflorida 21:53 9/20/2001 (0)
- Thanks Mark. Really hits home. (nt) - Tony-Without a 5er for now-Phoenix, AZ. 21:29 9/20/2001 (1)
  - Compelled me to dig for mine/GREAT job (eom) - Rich from Philly 23:34 9/21/2001 (0)
Where to get Bilsteins cheap? - Raj 20:02 9/20/2001 (7)
- Try Bilstein Touring- BavAuto, I like em! (NT) - Lexington KY 528e 10:00 9/21/2001 (0)
- Eurasian Auto Parts but made Bavauto meet price - ScottJ 09:50 9/21/2001 (0)
- Try Shox.com (nt) - Eddie Kielbon 21:59 9/20/2001 (0)
- turnermotorsport.com....cheapest I found!! - ron535i 21:18 9/20/2001 (0)
- Also, what is the difference between the stock... - Raj 20:21 9/20/2001 (1)
  - Re: Also, what is the difference between the stock - Dana R 20:27 9/20/2001 (0)
- RD Enterprises (more) - Greg T Knox, TN 20:10 9/20/2001 (0)
Free to good homes... - Rich from Philly 19:43 9/20/2001 (9)
- Re: Free to good homes... - Dave633 20:58 9/20/2001 (0)
- Dan needs them more then I do. Let him have them.. - Tony-Without a 5er for now-Phoenix, AZ. 20:25 9/20/2001 (2)
  - Re: Dan needs them more then I do. Let him have th - dan 10:09 9/21/2001 (1)
    - Yup, this is what it's all about!!!!!! (nt) - Tony-Without a 5er for now -Phoenix, AZ 14:39 9/21/2001 (0)
- Re: Free to good homes... - Tony-Without a 5er for now-Phoenix, AZ. 19:54 9/20/2001 (4)
  - Re: Free to good homes... - Dan Younes 20:17 9/20/2001 (3)
    - Re: Free to good homes... - Rich from Philly 21:35 9/20/2001 (2)
      - Re: Free to good homes... - dan 10:06 9/21/2001 (0)
      - Check that -- per Tony - Rich from Philly 21:38 9/20/2001 (0)
WTB: Sport seat wiring harness - Randall 19:34 9/20/2001 (1)
- The harness from electric comfort seats is - f1reverb 04:33 9/21/2001 (0)
Pics of my completed IS spoiler project (pic) - Brian 17:29 9/20/2001 (11)
- What is the offset of the wheels?, Thanks Ray (pic) - Ray, in hot and sunny Phoenix 12:04 9/21/2001 (0)
- Painted side mirrors? - Chuck 11:53 9/21/2001 (1)
  - Re: Painted side mirrors? - Brian 12:23 9/21/2001 (0)
- Re: Pics of my completed IS spoiler project - Joe in NJ 11:46 9/21/2001 (1)
  - My conversion - Brian 12:28 9/21/2001 (0)
- Are those bumpers lipo'd? -- looks great!! (nt) - Chris Altman 22:22 9/20/2001 (1)
  - Yes, but I don't think I'd do it again - Brian 10:26 9/21/2001 (0)
- Re: Pics of my completed IS spoiler project (pic) - Wes 21:02 9/20/2001 (0)
- Re: Pics of my completed IS spoiler project - Don Stevens 17:42 9/20/2001 (2)
  - Don, here's the details - Brian 18:03 9/20/2001 (1)
    - That sounds easy enough...Photo (url) - Don Stevens 22:59 9/20/2001 (0)
Will an E30 front spoiler fit on an E28? - Jeremy Tucker 17:17 9/20/2001 (1)
- No! - Yazz 17:23 9/20/2001 (0)
Test pic (pic) (nt) - Brian 17:13 9/20/2001 (0)
Fixed the Shimmy but have question/concern (pic) - Steve H 16:58 9/20/2001 (4)
- Re: Fixed the Shimmy but have question/concern - JimC 15:51 9/21/2001 (0)
- My last shimmy experience - Tim G. in Central Jersey 06:06 9/21/2001 (0)
- Re: Fixed the Shimmy but have question/concern - Joseph Brock 00:02 9/21/2001 (1)
  - Rim was very hot, real dirty & squeaking @ low mph - Steve H 11:41 9/21/2001 (0)
FINALLY Updated the Site! (url) - Brad Couvillon 16:22 9/20/2001 (5)
- Nice! How timely! - Chuck 11:47 9/21/2001 (1)
  - You might be able to. . . (url) - Brad Couvillon 16:30 9/21/2001 (0)
- Nice... - Greg T Knox, TN 20:06 9/20/2001 (1)
  - Re: Nice... (url) - Brad Couvillon 20:35 9/20/2001 (0)
- Re: FINALLY Updated the Site! - Steve 16:46 9/20/2001 (0)
Does anyone use their Anti-Theft Devices?? - Tim In PA 16:19 9/20/2001 (5)
- Re: Interesting alarm experience - Mike K 07:52 9/21/2001 (0)
- Deadbolt sucks- dangerous! - RonW 19:49 9/20/2001 (0)
- Deadbolt? huh? - eurotrash 18:28 9/20/2001 (0)
- Yes and no... - Mikey R. 17:32 9/20/2001 (1)
  - Mike, No need to worry. If code doesn't work after - Yazz 19:00 9/20/2001 (0)
What is the best size snow tire for an E28?? - Tim In PA 16:16 9/20/2001 (7)
- Re: What is the best size snow tire for an E28?? - Joe in NJ 11:47 9/21/2001 (0)
- That size would work fine - Phaedrus 09:08 9/21/2001 (0)
- Re: What is the best size snow tire for an E28?? - Scott P. 06:44 9/21/2001 (0)
- I've heard about that stuff.... - Chris Altman 22:27 9/20/2001 (0)
- Move to Phoenix. (nt) - Tony-Without a 5er for now -Phoenix, AZ 17:13 9/20/2001 (2)
  - What is this strange "snow" you speak of, stranger - John (SoCal desert) 17:35 9/20/2001 (1)
    - They just don't understand..... (nt) - Tony-Without a 5er for now-Phoenix, AZ. 21:39 9/20/2001 (0)
Anybody Interested in Oil Stickers with.... - Yazz 16:06 9/20/2001 (4)
- How about just "The Ultimate Driving Machine" due - donpeak 17:02 9/22/2001 (0)
- Interested, what would they look like? (nt) - todd green 23:04 9/21/2001 (1)
  - I was going to try and do something suitable to... - Yazz 09:16 9/23/2001 (0)
- I'd take a few (nt) - Jan R. 00:09 9/21/2001 (0)
BEST TIRES FOR FACTORY RIMS? - Dan Younes 15:30 9/20/2001 (6)
- Pray that you don't have TRX 390's (nt) - Matt from Portland 16:02 9/20/2001 (5)
  - 528e had 14" wheels not TRX, right? - pt 17:31 9/20/2001 (4)
    - Re: 528e had 14" wheels not TRX, right? - Dan Younes 19:07 9/20/2001 (3)
      - 390mm is rim diameter of TRX. Std tires don't fit. (nt) - RonW 19:38 9/20/2001 (2)
        
        Re: 390mm is rim diameter of TRX. Std tires don't - Dan Younes 20:17 9/20/2001 (1)
        
        Re: 390mm is rim diameter of TRX. Std tires don't - RonW 21:21 9/20/2001 (0)
325e steering wheel in 528e - Anthony 15:16 9/20/2001 (4)
- Re: 325e steering wheel in 528e - J 19:27 9/20/2001 (0)
- Re: 325e steering wheel in 528e - Dan Younes 15:28 9/20/2001 (2)
  - Re: 325e steering wheel in 528e - Anthony 21:23 9/20/2001 (1)
    - Re: 325e steering wheel in 528e - Dan Younes 15:42 9/21/2001 (0)
BIMMERCRUISE II PA/NJ/NY - Details Are In. Join Us - Tim In PA 14:08 9/20/2001 (3)
- Re: BIMMERCRUISE II PA/NJ/NY - Details Are In. Joi - Mike K 15:03 9/20/2001 (0)
- i'm in !(nt) - bryan 14:52 9/20/2001 (0)
- Re: BIMMERCRUISE II PA/NJ/NY - Ed 14:40 9/20/2001 (0)
does rim width matter? - pt 13:47 9/20/2001 (8)
- Yes, it matters. But a 225 is ok on a 7 inch rim - Brian 18:22 9/20/2001 (0)
- Devinder's info is good. Also look at... - Shawn D. 14:04 9/20/2001 (1)
  - I agree, more wheel width = less tire flex (more) - Ken M 15:54 9/20/2001 (0)
- Wow, Didn't know the 540i came with 15" wheels(nt) - Tim In PA 14:01 9/20/2001 (3)
  - Same rims on 93 to 94 740i/iL - Joe in NJ 11:49 9/21/2001 (0)
  - bought from an e34 540i owner, check e34 board - pt 17:19 9/20/2001 (0)
  - Unless - Drew Zacharda 17:17 9/20/2001 (0)
- Re: does rim width matter? - Devinder 13:54 9/20/2001 (0)
New Items now on special! check them out !!! ---> (url) (pic) - MAX@edgeracing 13:31 9/20/2001 (0)
PUT e34 WHEELS ON CAR, HUB CAPS WON'T FIT - PDX 535i 12:58 9/20/2001 (2)
- you can make them fit - pt 13:27 9/20/2001 (1)
  - TIRES - PDX 535i 13:49 9/20/2001 (0)
HELP - Al 12:43 9/20/2001 (0)
Hey Duke! If I get called up and deploy... - Dave S. 12:31 9/20/2001 (2)
- Sounds great....just give me a call. (nt) - Duke 18:43 9/20/2001 (1)
  - God Bless You Guys! We're all with you! (eom) - Rich from Philly 09:53 9/21/2001 (0)
Easy engine swap?? what engines fit? - erik 12:03 9/20/2001 (9)
- Most bang for buck would be... - Dave S. 12:13 9/20/2001 (8)
  - Actually M50 is most bang for buck and just as ... (url) - Rob Anderson 12:19 9/20/2001 (7)
    - tranny question - Devinder 14:08 9/20/2001 (1)
      - Re: tranny question - andyman 16:00 9/20/2001 (0)
    - Why bother with this expensive motor? - Phaedrus 13:36 9/20/2001 (3)
      - Because of the wieght balance and the fact that... (url) - Rob Anderson 14:02 9/20/2001 (2)
        
        Doesn't the '82 528e have the same Getrag 265 that - Phaedrus 09:17 9/21/2001 (0)
        
        also - andyman 16:04 9/20/2001 (0)
    - Re: Yeh, 189 HP and NO Timing belt "nt" - Richard '83 533i Houston Tejas 12:28 9/20/2001 (0)
Wacky wheels (pic) - Chuck 10:48 9/20/2001 (13)
- Shawn - Was this photo taken at Kershaw? - Ken M 16:09 9/20/2001 (2)
  - Roebling Road Raceway, GA (txt) - Chuck 00:55 9/21/2001 (0)
  - I didn't take/post it. Chuck, how about it? (eom) - Shawn D. 18:42 9/20/2001 (0)
- YES! I have 15x8 Kosei wheels on mine (more) - Ken M 16:04 9/20/2001 (3)
  - Haha! I JUST wrote you an email! - Chuck 16:12 9/20/2001 (2)
    - Hmmm... I don't think I got it (more) - Ken M 16:23 9/21/2001 (1)
      - What tires do you have? (nt) - Chuck 18:21 9/22/2001 (0)
- You're in luck! (url) - Shawn D. 11:01 9/20/2001 (5)
  - If it's the one in the pic, I spoke too soon! (url) (pic) - Shawn D. 11:06 9/20/2001 (4)
    - It's this one... not on the website? (url) (pic) - Chuck 12:41 9/20/2001 (1)
      - Yeah, I looked for it and... (url) - Shawn D. 13:35 9/20/2001 (0)
    - Re: If it's the one in the pic, I spoke too soon! (url) - Joseph Brock 11:32 9/20/2001 (1)
      - I'm in Alpharetta. See you at the P'tree Concours? (url) - (eom) Shawn D. 12:20 9/20/2001 (0)
Major kudos for this board! - Rich from Philly 10:16 9/20/2001 (3)
- That's f1reverb as in Formula 1 and spring-reverb - f1reverb 16:04 9/20/2001 (1)
  - As In Fender Vibrolux Reverb! Yeah Baby! - Tim In PA 20:12 9/20/2001 (0)
- Sorry! Tim G. from NEW JERSEY. Big difference! eom - Rich from Philly 10:34 9/20/2001 (0)
533i losing oil but no leaks? - Fred 09:58 9/20/2001 (6)
- Re: 533i losing oil but no leaks? - John Langenfelder 21:29 9/20/2001 (0)
- Have someone follow behind you & look to be sure - Shawn D. 10:45 9/20/2001 (4)
  - Re: PCV? - Paul Schnettler 11:50 9/20/2001 (3)
    - Key is "PCV" without a "PCV valve" (more) - Shawn D. 12:24 9/20/2001 (2)
      - Re:at least it's not an EGR, heh!(n/t) - Paul Schnettler 07:06 9/21/2001 (0)
      - Re: Key is "PCV" without a "PCV valve" (more) - Fred 18:42 9/20/2001 (0)
That's M1, sorry. - Yazz 09:48 9/20/2001 (4)
- so what's the asking price? - charlie 13:26 9/20/2001 (3)
  - He collects old BMW's. Wasn't for sale.... - Yazz 14:20 9/20/2001 (2)
    - Must have been at CVM, right? (nt) - Matt S 14:35 9/21/2001 (1)
      - Correct! You in central PA? - Yazz 10:42 9/24/2001 (0)
Saw M! today. Local dealer has one. - Yazz 09:48 9/20/2001 (0)
Squeeky AC Blower Motor - funfer 09:23 9/20/2001 (5)
- Earlier thread covers this... (url) - RonW 22:14 9/20/2001 (0)
- can this be done without removing dash? - adrianinflorida 22:09 9/20/2001 (0)
- Re: Squeeky AC Blower Motor - Larred 11:03 9/20/2001 (2)
  - How did you apply the 3 in 1 oil? - Bobcat 12:40 9/20/2001 (1)
    - Re: How did you apply the 3 in 1 oil? - Larred 12:23 9/21/2001 (0)
removing rain gutter and door trim - Steve 09:20 9/20/2001 (2)
- Re: removing rain gutter and door trim - Bill 10:46 9/20/2001 (1)
  - Re: Thanks Bill! Simple! - Steve 08:14 9/24/2001 (0)
spotted - Z8 - Scott P. 09:10 9/20/2001 (0)
Just a couple more items-FREE - funfer 09:03 9/20/2001 (1)
- I would like to get that drive shaft... - David Hunt 17:17 9/20/2001 (0)
Location of block coolant drain on 533i? - Joe 07:25 9/20/2001 (3)
- Re: Location of block coolant drain on 533i? - Joe 07:07 9/21/2001 (0)
- Re: Location of block coolant drain on 533i? - Jonathan Pecsok 08:09 9/20/2001 (1)
  - block coolant drain needs19mm socket (nt) - charlie 13:27 9/20/2001 (0)
gearbox questions - rexmo 07:13 9/20/2001 (3)
- Re: Here's what I know about the (more long) - Richard '83 533i Houston Tejas 08:15 9/20/2001 (2)
  - Re: OT, Can someone tell me how to adjust IE5 - Richard '83 533i Houston Tejas 08:21 9/20/2001 (1)
    - Re: Forget it I found my answer. - Richard '83 533i Houston Tejas 08:38 9/20/2001 (0)
15w-50 - Jason 05:42 9/20/2001 (1)
- Check Your Owners Manual. Which car do you have? - Tim In PA 08:23 9/20/2001 (0)
535 failed Ca. idle emissions test-BAD! - J. Murph. 03:26 9/20/2001 (1)
- Be more specific about the emissions... - RonW 19:26 9/20/2001 (0)
For you guys looking for exposed-lug Alpinas... - Raj 01:30 9/20/2001 (3)
- cant read German........ - ron535i 22:28 9/20/2001 (2)
  - Re: These wheels are what Alpina used on the B9 - Richard '83 533i Houston Tejas 06:51 9/21/2001 (1)
    - Re: That's 205/55 (front) 225/50 (rear) (nt) - Richard '83 533i Houston Tejas 06:53 9/21/2001 (0)
528 erratic idle/sumble - Thomas H. Bratcher 01:07 9/20/2001 (0)
Non lead-acid battery - TheSynic 00:53 9/20/2001 (3)
- Thanks Rick & Shawn - Manuel 23:35 9/20/2001 (0)
- Shawn is right... more detailed info link... (url) - Rick V 09:11 9/20/2001 (0)
- It depends on the battery's application (more) - Shawn D. 07:20 9/20/2001 (0)
BMW CCA impressions (rant) - Azure 23:42 9/19/2001 (20)
- Explnation - Thorny Sill 17:22 9/24/2001 (0)
- Your experience is a slice of America in general - Rich from Philly 18:26 9/20/2001 (1)
  - You're right... & I'm playing my Black Flag! (eom) - Shawn D. 18:49 9/20/2001 (0)
- It varies from chapter to chapter - Dave S. 12:26 9/20/2001 (0)
- Re: BMW CCA impressions (longer rant) - charles 12:01 9/20/2001 (2)
  - Ditto from another Tarheel member (more) - Ken M 16:42 9/20/2001 (0)
  - Re: Bravo Charles, nice post (nt) - Paul Schnettler 12:15 9/20/2001 (0)
- You have your answers and - KeithF PA H7s 535 10:57 9/20/2001 (0)
- Get involved! - Bruce H ATL 08:43 9/20/2001 (0)
- Peachtree Chapter (GA) is the complete opposite! (url) - Shawn D. 07:06 9/20/2001 (2)
  - Couldn't agree more.... (url) - funfer 09:13 9/20/2001 (0)
  - i know the feeling....... (url) - bryan 07:26 9/20/2001 (0)
- Too bad - Dana R 06:29 9/20/2001 (0)
- You feel bad? How do you think E12s feel? - Eric 02:29 9/20/2001 (0)
- Well that's too bad. - John (SoCal desert) 01:56 9/20/2001 (4)
  - Re: Well that's too bad. - Bob Sutterfield 07:11 9/20/2001 (0)
  - Well said, John....you really should come out... - Tim G. in Central Jersey 05:53 9/20/2001 (1)
    - You guys do have nice drives, but. . . - John (SoCal desert) 11:19 9/20/2001 (0)
  - SHOW UP! - Eric 02:30 9/20/2001 (0)
- Re: BMW CCA impressions (rant) - Bob Sutterfield 00:52 9/20/2001 (0)
Oil pan question - Jason 23:28 9/19/2001 (3)
- fairly easy - Devinder 11:05 9/20/2001 (1)
  - Re: fairly easy - a 18:33 9/20/2001 (0)
- How did they know it was "messed up"? - Shawn D. 07:42 9/20/2001 (0)
Many E28 parts for sell (long) - Ricardo 22:23 9/19/2001 (1)
- Ricardo, check your email. - eedwards101 02:09 9/21/2001 (0)
tire size - MARK 22:04 9/19/2001 (2)
- Re: tire size - Robert 00:48 9/20/2001 (1)
  - does rim width matter? - pt 13:43 9/20/2001 (0)
Driveshaft install problem/question...help! - BK NorCal_84 533i 22:02 9/19/2001 (3)
- Thanks guys, just a lame move on my part... - BK NorCal_84 533i 21:41 9/20/2001 (0)
- Re: Driveshaft install problem/question...help! - Mitch 22:14 9/19/2001 (1)
  - Re: Driveshaft install problem/question...help! - Tim In PA 08:27 9/20/2001 (0)
here is what carmax said... - andrew 21:39 9/19/2001 (2)
- Take it before the motor goes south (nt) - Dave S. 07:19 9/20/2001 (0)
- If you don't care for it, why keep it? - Raj 21:58 9/19/2001 (0)
Torqueing rebuilt head - Todd Q., 88 535i 21:36 9/19/2001 (1)
- Re: Torqueing rebuilt head (url) - Bob C WNC 85 635 22:59 9/19/2001 (0)
for sale - Rui 20:38 9/19/2001 (0)
BRAND NEW ATE HIGH PERFORMANCE LAZER CUT ROTORS - T 20:32 9/19/2001 (2)
- What the heck is a LAZER cut rotor? (nt) - E28man 06:48 9/20/2001 (0)
- sssshhhhhh....you don't have to yell. . . - . . . 21:54 9/19/2001 (0)
A new window problem for you (url) - Brad Couvillon 20:06 9/19/2001 (5)
- Re: A new window problem for you (url) - Chris Graff 21:41 9/19/2001 (4)
  - Ahhh, I see. . . (url) - Brad Couvillon 00:36 9/20/2001 (3)
    - Well then you should be talking to me;-) (url) - Rob Anderson 01:24 9/20/2001 (2)
      - BTDT. . . (url) - Brad Couvillon 08:36 9/20/2001 (1)
        
        Please send me a private email to remind me(EOM) (url) - Rob Anderson 00:19 9/21/2001 (0)
Euro headlights......need to identify #'s Hella - tim atl. 19:41 9/19/2001 (1)
- Re: Euro headlights......need to identify #'s Hell - T 20:27 9/19/2001 (0)
Looking for a 535 5-spd? - bostonM3 19:07 9/19/2001 (0)
Power windows on 85 528e - TheSynic 18:25 9/19/2001 (5)
- 5 Series Owner's Handbook on CD - Joe in NJ 23:10 9/19/2001 (0)
- Re: Power windows on 85 528e - rexmo 18:37 9/19/2001 (3)
  - Re: Power windows on 85 528e - andyman 19:02 9/19/2001 (2)
    - Re: Power windows on 85 528e - rexmo 22:39 9/19/2001 (1)
      - Re: Power windows on 85 528e FIXED! - TheSynic 11:49 9/24/2001 (0)
Need Radio for 528 e - Richard O 17:47 9/19/2001 (2)
- Re: Need Radio for 528 e - Chris R '74 tii 20:45 9/19/2001 (0)
- funfer had one just last week or so....i thought - donpeak 20:24 9/19/2001 (0)
Funky Idle 533i - Matt from Portland 17:08 9/19/2001 (3)
- Other things to check - Kitster, Boise ID 533i 14:37 9/20/2001 (0)
- Re: Possibly the Idle Control Module $$$s. (nt) - Richard '83 533i Houston Tejas 02:48 9/20/2001 (0)
- Sounds like the idle control valve not working - PaulR 20:18 9/19/2001 (0)
F/S E28 WEDS RACING WHEELS (pic) - Eric Ty@Apex 16:45 9/19/2001 (0)
F/S E28 GOLD BBS RIMS (pic) - Eric Ty@Apex 16:36 9/19/2001 (4)
- Eric, check your e-mail. - Mark W 09:41 9/20/2001 (0)
- Come on Bob, you know you want them... - Doug G 20:19 9/19/2001 (2)
  - Re: Come on Bob, you know you want them... - Bob Sutterfield 00:58 9/20/2001 (1)
    - Re: Come on Bob, you know you want them... - Mark W 09:39 9/20/2001 (0)
Test Post..........IGNORE!!!!!!!!!!!!!!!! (url) (nt) - tim atl. 15:34 9/19/2001 (1)
- Do test posts on the TEST page! (eom) - Shawn D. 07:09 9/20/2001 (0)
Test Post..........IGNORE!!!!!!!!!!!!!!!! (nt) - tim atl. 15:34 9/19/2001 (0)
Ronal USA, SNOW wheel/tire packages... (url) - Gary@Ronal 15:32 9/19/2001 (0)
Need some suggestions, Please Help!!!!!!!!!!!!!!! - Ross - '87 528e 15:27 9/19/2001 (7)
- Re: Need some suggestions, Please Help!!!!!!!!!!! - Azure 23:00 9/19/2001 (0)
- Re: Need some suggestions, Please Help!!!!!!!!!!! - Raj 20:39 9/19/2001 (0)
- Both a total waste of $$ that will get you nothing - Brian 18:12 9/19/2001 (0)
- Re: Need some suggestions, Please Help!!!!!!!!!!! - andyman 17:53 9/19/2001 (0)
- Re: Need some suggestions, Please Help!!!!!!!!!!! - Jeff87-535is 15:49 9/19/2001 (2)
  - Except thet, if money is a problem...(more) - Jean 17:25 9/19/2001 (0)
  - Ditto! - Yazz 15:59 9/19/2001 (0)
For anyone who wants foglights on w/ parking light - Lancen 14:24 9/19/2001 (3)
- What about foglights on alone? - dab 15:07 9/19/2001 (2)
  - Re: What about foglights on alone? - RonW 17:53 9/19/2001 (0)
  - Re: What about foglights on alone? - Lancen 15:42 9/19/2001 (0)
WTB - HARTGE valve cover for M30 engine - Duke 14:00 9/19/2001 (0)
puzzled... glovebox - TJ in P.A. 12:09 9/19/2001 (2)
- Re: puzzled... glovebox - Ed 12:26 9/19/2001 (0)
- search archives for power locks & glovebox... - rexmo 12:13 9/19/2001 (0)
Screw under gas pedal???? - Jason 11:46 9/19/2001 (1)
- Adjust it for full-throttle position - Shawn D. 13:41 9/19/2001 (0)
Where do I get red stain glass spray paint? - Jason 11:45 9/19/2001 (1)
- Try this link (url) (nt) - Drew Zacharda 12:41 9/19/2001 (0)
Who put truck tires on my 528i - Stan 11:43 9/19/2001 (5)
- Thanks for the sugggestions, I'll try 'em (n/t) - Stan 08:46 9/20/2001 (0)
- B.S.!! rotate tires...i had same problem and found - donpeak 20:27 9/19/2001 (0)
- Drive shaft u-joint?? - (nt) PaulR 20:20 9/19/2001 (0)
- Re: Who put truck tires on my 528i - Ed 13:34 9/19/2001 (1)
  - Re: Other noise makers - Stan 14:38 9/19/2001 (0)
Holy TWIN TURBOS Batman!!!! (pic) - TCD 11:19 9/19/2001 (8)
- Re: Holy TWIN TURBOS Batman!!!! - RussC 12:42 9/21/2001 (0)
- good gobbledy gook what a bunch o'stuff - Fisher 19:02 9/19/2001 (0)
- good gobbledy gook what a bunch o'stuff - Fisher 19:02 9/19/2001 (0)
- TCD ... you are amazing! Another great find! - Eddie 18:38 9/19/2001 (1)
  - Re: TCD ... you are amazing! Another great find! - TCD 18:44 9/19/2001 (0)
- What to do... - Mikey R. 18:19 9/19/2001 (1)
  - Re: What to do... - TCD 18:45 9/19/2001 (0)
- Todd, your sick!!!!!! You should give that away... - Tony-Without a 5er for now -Phoenix, AZ 12:33 9/19/2001 (0)
Heater Help - Ken 11:09 9/19/2001 (2)
- Re: Heater Help - Fredrik 19:51 9/19/2001 (0)
- One thing to check (among many) - Kitster, Boise ID 533i 11:35 9/19/2001 (0)
Free Wheels in Houston - Jeff87-535is 10:34 9/19/2001 (2)
- Kristopher-Call - Jeff87-535is 15:46 9/19/2001 (0)
- Re: Jeff, I'm in the Klein area near Hooks Airport - Richard '83 533i Hou Tx 14:10 9/19/2001 (0)
Sorry meant to post for bumper parts on e34! (nt) - Jonathan 10:11 9/19/2001 (0)
WTB Front bumper parts... - Jonathan 10:10 9/19/2001 (5)
- i've got a complete bumper - mikey 11:50 9/19/2001 (3)
  - Re: i've got a complete bumper - Bob 528e86 13:03 9/19/2001 (2)
    - There are no fog lights - mikey 13:59 9/19/2001 (1)
      - Re: There are no fog lights - Lou 03:43 9/23/2001 (0)
- Re: WTB Front bumper parts... - Jonathan 10:11 9/19/2001 (0)
Anybody know where to buy BMW Roundel Floor Mats? - cfisher 10:04 9/19/2001 (5)
- What color do you want? - Jon 87 535is 10:45 9/20/2001 (1)
  - Re: What color do you want? - cfisher 12:33 9/20/2001 (0)
- Re: Anybody know where to buy BMW Roundel Floor Ma - Alpinaman 03:11 9/20/2001 (2)
  - Re: Anybody know where to buy BMW Roundel Floor Ma (url) - Alpinaman 03:39 9/20/2001 (1)
    - Re: Anybody know where to buy BMW Roundel Floor Ma - cfisher 12:31 9/20/2001 (0)
PARTS FOR SALE - tim atl. 09:49 9/19/2001 (3)
- Re: PARTS FOR SALE - Paul Schnettler 10:12 9/19/2001 (0)
- tim, are the switches lighted? - Paul Schnettler 09:51 9/19/2001 (1)
  - oops, nevermind (seat) switches, not window! - Paul Schnettler 09:55 9/19/2001 (0)
Stock stereo stops playing for a second when brake - tim atl. 09:42 9/19/2001 (5)
- Re: Stock stereo stops playing for a second when b - Mark Chesnutt 16:28 9/20/2001 (0)
- Re: Stock stereo stops playing for a second when b - Joe in NJ 10:43 9/19/2001 (0)
- Probably just a fuse... - Rich from Philly 09:46 9/19/2001 (2)
  - Thanks, I'll try that, other ideas are appreciated - tim atl. 10:28 9/19/2001 (1)
    - I Tried everything but found the best way to fix - cole 19:53 9/19/2001 (0)
Pressure vs. vacuum bleeding - Joseph Brock 09:40 9/19/2001 (6)
- Great Price on Speedi-Bleed w/ multi-make adapters - CliffB 09:30 9/22/2001 (0)
- I like Motive Products (url) (pic) - Bob Sutterfield 11:12 9/19/2001 (1)
  - I've got one and am very pleased with it (more) - Shawn D. 11:23 9/19/2001 (0)
- Have you tried the "traditional" methods? - Shawn D. 10:44 9/19/2001 (1)
  - Don't forget taping the bleeder screws... - Pat Hines 21:56 9/20/2001 (0)
- Try this EZ Bleeder from e24 BCG page (url) - Bob C WNC 85 635 10:44 9/19/2001 (0)
OBC "Brake Light" stay on..Any clues??? - Mark Chesnutt 09:14 9/19/2001 (5)
- Re: OBC "Brake Light" stay on..Any clues??? - Mark Chesnutt 14:38 9/20/2001 (2)
  - Re: OBC "Brake Light" stay on..Any clues??? - Mark Chesnutt 08:58 9/21/2001 (0)
  - Re: OBC "Brake Light" stay on..Any clues??? - RonW 19:03 9/20/2001 (0)
- Re: OBC "Brake Light" stay on..Any clues??? - Joe in NJ 10:47 9/19/2001 (0)
- Re: OBC "Brake Light" stay on..Any clues??? - rex 10:17 9/19/2001 (0)
Anybody know the PN for Finish Line in Miami FL. (nt) - Duke 07:10 9/19/2001 (2)
- 305-266-9687 - pintoga 07:49 9/19/2001 (1)
  - THANKS!!! (nt) - Duke 11:53 9/19/2001 (0)
Lots of BMW stuff For Sale or FREE! - funfer 06:42 9/19/2001 (4)
- I'd like to have the - David Hunt 12:20 9/19/2001 (0)
- UPDATE-Lots of BMW stuff For Sale or FREE! - funfer 09:49 9/19/2001 (1)
  - Re: UPDATE-Lots of BMW stuff For Sale or FREE! - TheSynic 18:45 9/19/2001 (0)
- Re: Lots of BMW stuff For Sale or FREE! - Erik 09:09 9/19/2001 (0)
taking apart tailights - Jim S 05:56 9/19/2001 (2)
- Coloring lens has been discussed lots this week! - Scroll down! (eom) 06:28 9/19/2001 (1)
  - Thanks found the post, but.... - Jim S 07:53 9/19/2001 (0)
looking for the best price on wurth wheel paint - JMGitlin 00:18 9/19/2001 (2)
- Griotsgarage.com (nt) - Dana R 06:26 9/19/2001 (0)
- I have a full can unused. It's yours for shipping - Rich from Philly 00:44 9/19/2001 (0)
Anyone need carfax? Just email me. (nt) (nt) - Rich from Philly 22:12 9/18/2001 (0)
sensor on hydroboost does any one have # - eric in pa 21:28 9/18/2001 (2)
- Re: Here's the numbers - Richard '83 533i Houston Tejas 06:33 9/19/2001 (1)
  - Re: Here's the numbers - eric in pa 07:29 9/19/2001 (0)
Hella Super DE from Bekkers. . . Any experience? (url) - Brad Couvillon 21:24 9/18/2001 (2)
- Re:I wouldn't waste my money on these (more) - Richard '83 533i Houston Tejas 05:58 9/19/2001 (1)
  - Thanks. . . (url) - Brad Couvillon 11:17 9/19/2001 (0)
FS -- floor mats, shift knob, sheepskins - Rich from Philly 20:52 9/18/2001 (14)
- Everything's sold! - Rich from Philly 16:45 9/19/2001 (0)
- sheepskins still available? - james 10:27 9/19/2001 (0)
- First $50 gets the floormats (eom) (nt) - Rich from Philly 09:44 9/19/2001 (1)
  - Mats SOLD (eom) - Rich from Philly 10:47 9/19/2001 (0)
- Re: FS -- floor mats, shift knob, sheepskins - Joseph Brock 09:25 9/19/2001 (0)
- I'm interested in package...more (url) - Don Stevens 07:54 9/19/2001 (0)
- How about that wooden Nardi steering wheel? (nt) - Drew Zacharda 07:53 9/19/2001 (1)
  - FREE to anyone who wants to switch it out! - Rich from Philly 07:59 9/19/2001 (0)
- Re: FS -- sheepskins - Chris from SE PA 23:16 9/18/2001 (0)
- Re: FS -- floor mats, shift knob, sheepskins - Rich from Philly 22:01 9/18/2001 (2)
  - Post didn't work, I'll try again (nt) - Rich from Philly 22:03 9/18/2001 (1)
    - Real sheepskin. Not fake/good ones (nt) (nt) - Rich from Philly 22:04 9/18/2001 (0)
- Re: FS -- floor mats, how much $$$$$$$? - eric in pa 21:35 9/18/2001 (1)
  - 15% below cheapest you can find new?Sound good? nt - Rich from Philly 22:00 9/18/2001 (0)
Hot air won't stop - JMGitlin 20:50 9/18/2001 (2)
- Re: Hot air won't stop - Dan 07:35 9/19/2001 (0)
- There was a post quite a ways down follow the link (url) - Kitster, Boise ID 533i 22:38 9/18/2001 (0)
ac fan is squeaking only runs on high - adrianinflorida 19:44 9/18/2001 (5)
- Luricating A/C motor in situ is easy... - RonW 23:25 9/18/2001 (3)
  - Thanks ron i will try,could yoube more specific - adrianinflorida 20:49 9/19/2001 (2)
    - Re: Thanks ron i will try,could yoube more specif - RonW 18:42 9/20/2001 (1)
      - Re: Thanks ron , you the man - adrianinflorida 22:51 9/20/2001 (0)
- the resistance ckt on the passenger side of - Mike 20:37 9/18/2001 (0)
14"BMW Alloy wheels/tires for sale - PL Brand 19:35 9/18/2001 (2)
- What state are you in? - Tim In PA 22:11 9/18/2001 (1)
  - Re: What state are you in? - PL Brand 07:47 9/19/2001 (0)
Tire recommendations - Pat 18:00 9/18/2001 (0)
Shifter Linkage Help - TheSynic 17:34 9/18/2001 (3)
- Re: Shifter Linkage Help - stephen m. 11:39 9/19/2001 (0)
- Re: Shifter Linkage Help - ScottJ 08:45 9/19/2001 (0)
- get the bottom t-bushing & a UUC kit, worth the $ - tim atl. 17:49 9/18/2001 (0)
Good looking NJ 535is for sale on Ebay - Brian 17:04 9/18/2001 (3)
- Damn you, Brian! - Rich from Philly 20:35 9/18/2001 (1)
  - Re: Damn you, Brian! - adrianinflorida 21:26 9/18/2001 (0)
- OT but related - John (SoCal desert) 19:15 9/18/2001 (0)
For Sale: 16x8 cross-spokes from E38 740i (pic) - Drew Zacharda 16:48 9/18/2001 (9)
- Here's my fitment FAQ for these wheels on an E34 (url) - Drew Zacharda 07:51 9/19/2001 (0)
- Does anyone know the back spacing of these? (nt) (pic) - ron535i 20:00 9/18/2001 (1)
  - Sorry -- 23mm offset (nt) - Drew Zacharda 20:13 9/18/2001 (0)
- No modifications necessary... - Greg T Knox, TN 18:55 9/18/2001 (5)
  - Unless you run 225/50 up front... - Doug G 21:44 9/18/2001 (4)
    - Re: Unless you run 225/50 up front... - Jim Williams 22:35 9/18/2001 (3)
      - Re: Unless you run 225/50 up front... - Greg 07:11 9/19/2001 (2)
        
        No shimmy here w/ 5mm spacer... - Doug G 07:17 9/19/2001 (1)
        
        Re: No shimmy here w/ 5mm spacer... - Jim Williams 11:20 9/20/2001 (0)
new life for the e28 - Steve 16:17 9/18/2001 (11)
- Re: new life for the e28 - Jeff87-535is 10:28 9/19/2001 (0)
- Hack Mechanic Version (long, long) - Eddie Kielbon 00:44 9/19/2001 (0)
- I'd like to hear some different options... - Chris Altman 23:24 9/18/2001 (2)
  - Re: Chris, here's the link to the 5'r w/ Spax (url) - Richard '83 533i Houston Tejas 06:17 9/19/2001 (0)
  - Re: Chris, (url) - Richard '83 533i Houston Tejas 06:16 9/19/2001 (0)
- Re: new life for the e28 - Pat Hines 23:23 9/18/2001 (1)
  - Re: M-tech springs and Bilsteins - Steve 07:18 9/19/2001 (0)
- Running Bilstein HD's and HR springs........(more) - ron535i 20:54 9/18/2001 (0)
- Re: new life for the e28 - Dana R 18:03 9/18/2001 (0)
- No, I will talk you into it..... - Tony-Without a 5er for now -Phoenix, AZ 17:27 9/18/2001 (0)
- I'd like to know also (springs/shocks) - MikeO 16:48 9/18/2001 (0)
FRONT SPOILER (535is) on eBay! CHEAP! (url) - JeffreyOlson 16:15 9/18/2001 (0)
FS-Rear Headrest (url) - Randall 14:57 9/18/2001 (1)
- Link isn't working - check it out 16:07 9/18/2001 (0)
s.f. bay area 535i parts for sale - mark 14:47 9/18/2001 (7)
- Re: s.f. bay area 535i parts for sale - adam 07:58 9/19/2001 (0)
- Re: s.f. bay area 535i parts for sale - Ron in SF 00:52 9/19/2001 (0)
- Re: s.f. bay area 535i parts for sale - J 20:05 9/18/2001 (0)
- Re: s.f. bay area 535i parts for sale - TheSynic 17:15 9/18/2001 (0)
- Re: s.f. bay area 535i parts for sale - jay 15:01 9/18/2001 (0)
- Re: s.f. bay area 535i parts for sale - Dan in BFL 14:55 9/18/2001 (0)
- Re: s.f. bay area 535i parts for sale - mark 14:49 9/18/2001 (0)
WTB shift knob, boot, more... - ///Michael 14:45 9/18/2001 (1)
- I have them - todd green 22:01 9/18/2001 (0)
Will The Seats From A '73 Bavaria fit an E28 car? (nt) - Stuart S 14:34 9/18/2001 (0)
wheels - Paul lewis 13:40 9/18/2001 (3)
- Re: wheels - Rui 19:44 9/18/2001 (0)
- This is covered weekly.Just Scroll Down For Answer - Tim In PA 15:34 9/18/2001 (0)
- I have the e34 15" wheels on my 88 535i ...(more) - philv 14:05 9/18/2001 (0)
Paint code for Alpina wheels? - Mark535is 13:35 9/18/2001 (3)
- Re: Paint code for Alpina wheels? - shermanmartinez 14:13 9/18/2001 (1)
  - Genuine BMW wheel paint $9.00 per can. - Paul (at Maximill...) more... 15:03 9/18/2001 (0)
- best bet is to match in chip books(nt) - bryan 13:39 9/18/2001 (0)
Please help me find these parts - Lexington KY 528e 12:21 9/18/2001 (0)
Removing Rotors...Tools? Advise Pls (m) - tbDallas 10:22 9/18/2001 (6)
- Re: Removing Rotors...Tools? Advise Pls (m) - Bob Sutterfield 07:27 9/19/2001 (0)
- Re: Removing Rotors...Tools? Advise Pls (m) - Bob C WNC 85 635 15:02 9/18/2001 (0)
- Re: Removing Rotors...Tools? Advise Pls (m) - rex 11:31 9/18/2001 (1)
  - Thanks Rex! (nt) - tbDallas 11:41 9/18/2001 (0)
- Just stripped allen holes in both front rotors - What is the Solution to such a problem? 10:36 9/18/2001 (1)
  - Don't worry, this is an easy fix - Shawn D. 10:42 9/18/2001 (0)
BMW parts Garage Sale (url) - Randall 09:11 9/18/2001 (0)
It's time to play "Name That Noise"! - Chuck 07:56 9/18/2001 (3)
- ABS?? - Chris Altman 14:15 9/18/2001 (2)
  - More details about the noise - Chuck 15:54 9/18/2001 (1)
    - Re: WAG, pressure regulator or sensors (nt) - Richard '83 533i Houston Tejas 20:35 9/18/2001 (0)
Environmental coolant - Dan 07:56 9/18/2001 (3)
- Re: In my opinion it's not really environmentally - Richard '83 533i Houston Tejas 09:24 9/18/2001 (2)
  - Some other thing - Brian 11:22 9/18/2001 (1)
    - Re:You're probably right about corrosion (more) - Richard '83 533i Houston Tejas 20:33 9/18/2001 (0)
Any ideas on how to pull apart drive shaft - Ricardo 07:25 9/18/2001 (1)
- Loosen nut, then use penetrating oil (eom) - Shawn D. 09:36 9/18/2001 (0)
Mechanical Door lock problem - Steve 07:06 9/18/2001 (0)
M535i spoted in Medfield MA....are you out there? - Artie 06:44 9/18/2001 (8)
- Re: M535i spoted in Medfield MA....are you out the - bostonM3 16:55 9/18/2001 (7)
  - Re: M535i spoted in Medfield MA....are you out the - Artie 12:00 9/19/2001 (6)
    - hey artie - TD 18:35 9/19/2001 (3)
      - i'm glad it worked out, what do you drive? - Artie 08:02 9/20/2001 (2)
        
        88 528e 91K stock w/M5 rims... - TD 11:23 9/20/2001 (1)
        
        VERY nice to have him around (more) - Artie 07:25 9/21/2001 (0)
    - In Medfield - bostonM3 17:59 9/19/2001 (1)
      - you are from medfield? I am from medfield! - Artie 08:05 9/20/2001 (0)
My E28 will be posted A S A P. ok - Garett in New Zealand 02:43 9/18/2001 (0)
Need help on installing IS rear spoiler (url) (pic) - Wes 01:29 9/18/2001 (8)
- IS rear spoiler pics.... (pic) - Robert 01:27 9/19/2001 (0)
- Wes, that was me you out bid!!!! (nt) - Tony-Without a 5er for now -Phoenix, AZ 11:22 9/18/2001 (3)
  - hahahaha sorry!! :) I'll sell it to you for $250 (nt) - Wes 17:00 9/18/2001 (2)
    - Ohhhh, thats funny!!! Ummm...no. lol. (nt) - Tony-Without a 5er for now -Phoenix, AZ 17:53 9/18/2001 (0)
    - Ohhhh, thats funny (nt) - Tony-Without a 5er for now -Phoenix, AZ 17:53 9/18/2001 (0)
- See my post from a couple of days ago. - Brian 10:13 9/18/2001 (1)
  - Here's the link. - Brian 10:25 9/18/2001 (0)
- check my technical page for article on instal(EOM) (url) - Rob Anderson 02:49 9/18/2001 (0)
Internet retailer report -- Zygmunt Motors - Gary Webb 01:01 9/18/2001 (8)
- my 533 would be long gone w/o ZYGMUNT parts supply - BSAndy 533ia 21:22 9/18/2001 (0)
- Re: Internet retailer report -- Zygmunt Motors - BSAndy 533ia 21:18 9/18/2001 (0)
- noisy bosal for 88 528e - rex 11:36 9/18/2001 (4)
  - Re: Zygmunt - MikeO 16:52 9/18/2001 (0)
  - Re: noisy bosal for 88 528e - a 16:31 9/18/2001 (0)
  - Re: noisy bosal for 88 528e - a 16:30 9/18/2001 (1)
    - Re: noisy bosal for 88 528e - Gary Webb 00:56 9/19/2001 (0)
- Re: Internet retailer report -- Zygmunt Motors - Rob 08:04 9/18/2001 (0)
Looking for Big Sway Bars... (url) - Robert 00:23 9/18/2001 (0)
WTB: Front turn signal, rear SM light, more. . . (url) - Brad Couvillon 23:49 9/17/2001 (1)
- Re:Brad, check your email (nt) - Richard '83 533i Houston Tejas 06:14 9/19/2001 (0)
What did I do? - wantone 23:08 9/17/2001 (2)
- Adjuster screw on ICV this can lower idle(EOM) - Rob Anderson 02:50 9/18/2001 (1)
  - pull plug on ICV, adjust screw, plug in, etc. - (nt) PaulR 20:33 9/19/2001 (0)
Do stock rims from 95 325is fit 528e OK ? - Dan Valega 21:53 9/17/2001 (5)
- Re: Do stock rims from 95 325is fit 528e OK ? (pic) - Jeff87-535is 09:28 9/18/2001 (2)
  - Re: Do stock rims from 95 325is fit 528e OK ? - Greg 08:03 9/19/2001 (0)
  - After-market wheel question.... - Tim G. in Central Jersey 13:29 9/18/2001 (0)
- Lars is right, you WILL need spacers. (url) - Shawn D. 06:35 9/18/2001 (0)
- Be very careful on any 3 series wheels. - lars PNW 82_528i 22:04 9/17/2001 (0)
Is it possible to use E34 headlights in an E28 car - Tim n Pa 21:22 9/17/2001 (7)
- Elipsoids suck. Just install H4s n/m - Bob 00:37 9/18/2001 (3)
  - I think Bob is right - Brian 16:57 9/18/2001 (0)
  - Look @ this link on the e34 board (url) - Brad Couvillon 16:31 9/18/2001 (0)
  - Ellipsoids are great! with PIAA's - Joe in NJ 09:31 9/18/2001 (0)
- Ok, I'm curious. . . - John (SoCal desert) 21:31 9/17/2001 (2)
  - Re: Ok, I'm curious. . . - Tony-Without a 5er for now-Phoenix, AZ. 21:50 9/17/2001 (1)
    - I know what he's doing...... - lars PNW 82_528i 22:06 9/17/2001 (0)
M535 tow hook cover - Scott Perschke 21:03 9/17/2001 (0)
wtb: non-cracked dash board - paul 20:37 9/17/2001 (3)
- Re: wtb: non-cracked dash board - Gary 22:33 9/17/2001 (2)
  - Re: wtb: non-cracked dash board - paul 09:49 9/18/2001 (1)
    - Re: wtb: non-cracked dash board - Gary 22:18 9/18/2001 (0)
WTB: Sport seat wiring harness - Randall 19:37 9/17/2001 (0)
Will The Seats From An E36 M3 fit an E28 car? (nt) - Tim n Pa 19:27 9/17/2001 (1)
- Not without welding the floor(EOM) (nt) - Rob Anderson 02:51 9/18/2001 (0)
85 535i for sale in Texas - K Dean 17:16 9/17/2001 (1)
- Re: 85 535i for sale in Texas - K Dean 17:19 9/17/2001 (0)
ahhh the center bearing... - Mitch 16:56 9/17/2001 (3)
- cold chisel and heat gun did the trick, thanks!(nt (nt) - Mitch 12:37 9/18/2001 (0)
- They usually just... - Bob 00:40 9/18/2001 (0)
- Re: ahhh the center bearing... - Clyde 23:15 9/17/2001 (0)
Wanting A/C conversion opinions - cfisher 16:55 9/17/2001 (3)
- check this URL out by the EPA (url) - craigwatanabe 02:21 9/20/2001 (0)
- I have written and AC FAQ for the E28... - RussC 17:17 9/17/2001 (1)
  - Re: I have written and AC FAQ for the E28... - cfisher 09:21 9/18/2001 (0)
SI board for 1984 533i - Rob Simpson 16:17 9/17/2001 (0)
Essential manuals besides Bentley's??? - Pat 16:15 9/17/2001 (2)
- ETK - Bob Sutterfield 18:46 9/17/2001 (0)
- Electrical Troubleshooting Manual... (url) - RonW 17:07 9/17/2001 (0)
ANYONE have a early 535i 3-spoke steering wheel? - JeffreyOlson 15:05 9/17/2001 (3)
- Re: ANYONE have a early 535i 3-spoke steering whee - Tony-Without a 5er for now -Phoenix, AZ 17:00 9/17/2001 (2)
  - A wheel with no car and your selling it? - Yazz 17:04 9/17/2001 (1)
    - Actually, if I had a frame I could probably.... - Tony-Without a 5er for now -Phoenix, AZ 18:06 9/17/2001 (0)
seat replacement - Stuart S 15:00 9/17/2001 (0)
Radiator Hose - JMGitlin 14:15 9/17/2001 (4)
- Re: Radiator Hose - mslindstrom 14:34 9/17/2001 (3)
  - Re: Radiator Hose - JMGitlin 16:32 9/17/2001 (2)
    - Re: Radiator Hose - Phil D '88 535is 17:37 9/17/2001 (1)
      - Just spend the $60 and replace all hoses & clamps - Tim n Pa 19:28 9/17/2001 (0)
Check this out (url) (nt) - Raj 14:14 9/17/2001 (4)
- Sweet, but will it pass emissions? - Shawn D. 06:40 9/18/2001 (0)
- what board to talk fix when it breaks - BSAndy 533ia 20:22 9/17/2001 (1)
  - Good point. However, I wouldn't want to work on... - Raj 22:24 9/17/2001 (0)
- DROOOL - Kitster, Boise ID 533i 15:47 9/17/2001 (0)
FS-Set of TRX's (2 good, 2 bad) - JMGitlin 14:13 9/17/2001 (1)
- Where are you? NT - Terry 13:10 9/19/2001 (0)
Wheel bearing question - Raj 14:10 9/17/2001 (3)
- Re: Wheel bearing question - James 22:05 9/17/2001 (0)
- Doesn't sound like a wheel bearing. - Brian 14:17 9/17/2001 (1)
  - Re: Doesn't sound like a wheel bearing. - Raj 14:44 9/17/2001 (0)
need pic/drawing of 15-pin diagnostic connector! - Arexxx 13:44 9/17/2001 (1)
- forget it!!!!!! found it on bimmerhelp (NT) - Arexxx 13:55 9/17/2001 (0)
Air Stabilizer Questions - Kevin 13:27 9/17/2001 (0)
ARGH! stereo ground help... - ///Michael 13:23 9/17/2001 (2)
- Re: ARGH! stereo ground help... (url) - Brad Couvillon 16:17 9/17/2001 (0)
- Re: ARGH! stereo ground help... - Chris Altman 13:53 9/17/2001 (0)
Just wanted to offer thanks to all on E28 board> - Arexxx 12:35 9/17/2001 (0)
Flooded compartment - Art 12:08 9/17/2001 (2)
- Re: Flooded compartment - Arexxx 12:32 9/17/2001 (1)
  - Re: Flooded compartment - cfisher 16:27 9/17/2001 (0)
83 528e--how to replace ignition tumbler?? - Arexxx 11:58 9/17/2001 (0)
Sagging Rear Suspension - Opinions? - TD 11:34 9/17/2001 (6)
- Left side lower. - Jon H. 07:58 9/18/2001 (0)
- Thanks for the advice, now I wonder.... - TD 12:35 9/17/2001 (1)
  - Re:It's my understanding that the M5 (more) - Richard '83 533i Houston Tejas 13:05 9/17/2001 (0)
- Re: Sagging Rear Suspension - Opinions? - Ed 11:55 9/17/2001 (0)
- Re: What size tires do you have (more) - Richard '83 533i Houston Tejas 11:53 9/17/2001 (1)
  - For some reason the left side is off on most E28s - Tim n Pa 19:34 9/17/2001 (0)
Front mid-bass speaker blown - Jonathan 10:45 9/17/2001 (2)
- Re: Front mid-bass speaker blown (url) - Chuck 08:43 9/18/2001 (0)
- check this website (url) - craigwatanabe 16:46 9/17/2001 (0)
Using 1.5 qt in 1k normal? - ///Michael 09:52 9/17/2001 (7)
- my '88 uses about the same at around 100k on the m - adam 12:54 9/17/2001 (0)
- Are you sure it was truly full? - Chris R '87 535iS 11:59 9/17/2001 (1)
  - Re: Are you sure it was truly full? - ///Michael 13:10 9/17/2001 (0)
- Seems excessive to me. - Brian 10:38 9/17/2001 (3)
  - Re: Seems excessive to me. - ///Michael 10:40 9/17/2001 (2)
    - Did you have a compression/leakdown test done? - Brian 10:51 9/17/2001 (1)
      - No, because... (url) - ///Michael 11:12 9/17/2001 (0)
Drive Line Center Bearing - J. Scott 09:43 9/17/2001 (5)
- Thanks for the help - J. Scott 07:56 9/18/2001 (0)
- Re: Drive Line Center Bearing - Randall 13:55 9/17/2001 (2)
  - Re: Drive Line Center Bearing - J. Scott 07:44 9/18/2001 (1)
    - Table TEST - BOB 10:45 9/25/2001 (0)
- Lots of archive stuff on this - David Hunt 10:59 9/17/2001 (0)
Convert Your Key Light to LED - Kevin Ellis - Atlanta, GA area 07:22 9/17/2001 (0)
Fuel pressure regulator quandry - teak 06:32 9/17/2001 (4)
- Sounds about right... - Clyde 12:16 9/17/2001 (0)
- Re: Fuel pressure regulator quandry - Richard '83 533i Houston Tejas 07:01 9/17/2001 (2)
  - Re: part #'s & air temp. sensors - teak 11:44 9/19/2001 (1)
    - Re: part #'s & air temp. sensors - Clyde 22:06 9/19/2001 (0)
FS BRAND NEW RADIOS - William 05:49 9/17/2001 (0)
Any Brits going to the BMWCC(GB) Oktoberfest? - Alpinaman 03:18 9/17/2001 (0)
Can you believe this? (url) - Alpinaman 03:02 9/17/2001 (0)
FS: '87 535is w/5speed - Mike C. 87 535is 00:35 9/17/2001 (1)
- miles?? location?? rust?? - stephen m. 13:45 9/18/2001 (0)
1999, week 42
1999, week 41
1999, week 40
1999, week 39
1999, week 38
1999, week 37
1999, week 36
1999, week 35
1999, week 34
1999, week 33
1999, week 32
1999, week 31
1999, week 30
1999, week 29
1999, week 28
1999, week 27
1999, week 26
1999, week 25
1999, week 24
1999, week 23
1999, week 22
1999, week 21
1999, week 20
1999, week 19
1999, week 18
1999, week 17
1999, week 16
1999, week 15
1999, week 14
1999, week 13
1999, week 12
1999, week 11
1999, week 10
1999, week 09
1999, week 08
1999, week 07
1999, week 06
1999, week 05
1999, week 04
1999, week 03
1999, week 02
1999, week 01
1999, week 00
1998, week 52
1998, week 51
1998, week 50

Questions, comments, or problems, please visit the Roadfly help desk.