Re: Oil-level indicator Active-Check indicator ? (archive)
[ Follow Ups ] [ M5 (E28) Message Board ] [ Msg. Board FAQ ]
Posted by Rob Anderson on January 16, 2001 at 20:32:47:
In Reply to: Oil-level indicator Active-Check indicator ? posted by Matt Evans on January 16, 2001 at 17:32:42:
(posted from: 63.charlotte-01rh15rt.nc.dial-access.att.net (12.93.32.63))
The problem that you are running into is that the oil level sensor that is in your oil pan is getting stuck. I would suggest the next time you change your oil, to remove the sensor and clean it thoroughly. If this doesn't cure it, I would suggest replacing the sensor. They go bad every once in a while. If this doesn't fix it, most likely you have an electrical fault. This is not that hard to track down as long as you know the sensors are working properly.Rob
M535i SIG Chief Technical Advisor
www.m535i.org
Follow Ups:
[ Follow Ups ] [ M5 (E28) Message Board ] [ Msg. Board FAQ ]