Re: M-Technic springs.... (archive)

This is good information. But it doesn't answer the basic question. Why does Paul at Maximillian suggest installing Euro M5 springs on the rear in lieu of standard 535i springs? They are supposedly "MUCH better than just tossing 535i stuff back there." but I don't see how they could be any better.

BTW, I have a Ground Control coil-over suspension on my M6. We had a run-around getting the rear ride-height sorted out, but they made everything right.

The difference is the rate. All US 535i and 535is came with the same springs. The M5 has the same front springs, same RATE rear springs like you noted.

But there is an M-Technic package available for all E24/E28s. The M-Technic springs were not standard equipment on US 535is's like some have thought. Nor were they standard on US M5s. The M-Technic springs do have a higher rate and lower the front and rear just enough.

For street and even driver school use, everyone I've talked to LOVES their M-Technic springs. I just want something upgradeable in the future, that's all. I'm not going to waste time on springs I know I'll replace later. For $400 I'm getting all 4 corners converted to Ground Control coil-overs.

JamesM

And just what is the difference between "regular" 535is springs and Euro M5 springs? Since the spring rates for the 535i and US spec. SLS equipped M5 are the same, I'm guessing it's the free length.

Follow Ups:

I have 535i springs on the rear, all wrong JamesM 10:06 12/19/2001 (0)
Re: M-Technic springs.... Todd Kenyon 16:47 12/18/2001 (1)
- Re: M-Technic springs.... M6er 10:23 12/19/2001 (0)

[ Follow Ups ] [ M5 (E28) Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.