Re: Problem with fresh air blower (archive)
[ Follow Ups ] [ 3-series (E30) Message Board ] [ Msg. Board FAQ ]
Posted by Houston on November 12, 2000 at 20:33:40:
In Reply to: Problem with fresh air blower posted by Rick on November 12, 2000 at 13:48:38:
(posted from: ac854167.ipt.aol.com (172.133.65.103))
The resistors on mounted on a small plate located under the blower motor. The plate is "plugged in" in the back. Pull upward firmly, with a little wiggle side-to-side and it should come out.If you have a multi-meter, you can probably check the resistors. I can't remember if the manual lists the different resistances or not.
Houston
86 325
Follow Ups:
[ Follow Ups ] [ 3-series (E30) Message Board ] [ Msg. Board FAQ ]