The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: Opening ECU in 88 325is...more... (archive)
[ Follow Ups ] [ 3-series (E30) Message Board ] [ Msg. Board FAQ ]
Posted by Aaron on December 23, 2000 at 14:15:11:

In Reply to: Re: Opening ECU in 88 325is...more... posted by Shelby on December 23, 2000 at 10:16:07:

I have the ecu out.... trying to pry apart the two electronic panels. Are you understanding me correctly? I may not have explained it well enough. I've done this job several times before on a different car and didn't have any trouble at all, this really has me miffed! I just don't want to break a circut board with all the tugging and crap I've been doing. I'm doing my best to be patient with the process.

Aaron.

Have any of you opened an ECU on a 325is? My 88 325is is a tad different than the ECU on my old 88M3. The M3 had flat tabs that you push down to release the upper board from the lower. The 325is has little round tabs that don't want to budge! Can anyone enlighten me on how to break the seal so I can get inside to the chip? I gently pryed on it for two hours last evening and didn't get anything done:(

Thanks for the help.

Aaron.


Did you remove all of the little screws holding the boards in place? (silly question but there is no secret to getting these boards out)




Follow Ups:


[ Follow Ups ] [ 3-series (E30) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2008 Jump Internet Inc. All rights reserved.